Thermotical converter SBE
Shinko Technos Co., Ltd.

About This Product

・ DIN rail mounting type signal converter
・ Simple product lineup without display (stick terminal connection type)

■ The SB series has realized your request.
・ I want to consider it with priority.
Most cost advantage. Finished in both functions and performance.

・ The use is fixed, so after obtaining it, you can use it immediately.
We will make it into the specifications that meet the customer's wishes and we will deliver it, so we will not take much effort.

・ Wiring is complicated, it takes time to waste work.
Easy design with smooth installation and removal. Eliminates the seeds of worries on the site.

・ There is little room for installation.
The housing is slim, compact and adherent, so you can save space inside the board.

■ Plug -in socket
Since the plug -in socket method is adopted, it is a simple wiring just to insert it into the socket. The installation is one touch that only fits into the DIN rail. Easy to remove and maintain. We will contribute to improving workability.

■ Compact size
17.5 x 75 x 85mm (W x H x D) and compact. The gaps in the control panel can be used effectively, contributing to the reduction of design costs.

■ Input-Output-between power supply 3 ports insulation
Insulation, input, output, and power supply are insulated. Safety design that is not affected by noise. Ideal as an input signal insulator (isolator).

* There are other model numbers

Model
There are 10 models for this product.

Product
Thermotical converter SBE

Handling Company
Shinko Technos Co., Ltd.

*Please note that we may not be able to accommodate sample requests.

10 Models of Thermotical converter SBE

Items marked with have different values depending on the model number.

Click on the part number for more information about each product

Part Number	Price (excluding tax)	External dimensions	Adjustment	Ambient temperature	Available voltage range	Burnout	Case	Cold contact compensation accuracy	Instant power outage	Insulation resistance	Mounting method	Peripheral humidity	Power-supply voltage	Response time	Select output status	Show 1	Show 2	Span adjustment range	Standard accuracy	Temperature coefficient	Tolerant resistance	Withstand voltage	Zero adjustment range	input	isolation	mass	output	panel	power consumption	self-diagnosis
SBE-0101-0	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	85 ~ 264V AC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	100 ~ 240V AC 50/60Hz	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	600Ω or less	Input-Output-Power Source: 2.0kV AC 1 minute	-2.5 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 4 ~ 20mA DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0101-1	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	20-28V DC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	24V DC	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	600Ω or less	Input-Output-Power Source: 2.0kV AC 1 minute	-2.5 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 4 ~ 20mA DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0102-0	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	85 ~ 264V AC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	100 ~ 240V AC 50/60Hz	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	600Ω or less	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 0 ~ 20mA DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0102-1	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	20-28V DC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	24V DC	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	600Ω or less	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 0 ~ 20mA DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0103-0	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	85 ~ 264V AC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	100 ~ 240V AC 50/60Hz	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	1kΩ or less	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 0 ~ 12ma DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0103-1	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	20-28V DC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	24V DC	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	1kΩ or less	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 0 ~ 12ma DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0104-0	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	85 ~ 264V AC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	100 ~ 240V AC 50/60Hz	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	1kΩ or less	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 0 ~ 10ma DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0104-1	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	20-28V DC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	24V DC	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	1kΩ or less	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC current: 0 ~ 10ma DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0105-0	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	85 ~ 264V AC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	100 ~ 240V AC 50/60Hz	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	100Ω or more	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC voltage: 0 ~ 1V DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities
SBE-0105-1	Available upon quote	W17.5 × H75 × D85mm	・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5%	-5 ~ 55 ℃	20-28V DC	・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom	Flame -retardant resin color: Light gray	Within ± 1.0 ° C at -5 to 55 ° C	30msec	Input-Output-between power supply: 500V DC 10mΩ or more	Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.)	35 ~ 85%RH (but not condensation)	24V DC	1 second (0 → 90%) (average 0.5 seconds)	・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse	・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities	・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less	97.5 ~ 102.5%	・ Within 0.2%of the input span or 2 ° C (4 ° f) either value ・ K, J, E, T, N input 0 ° C (32 ° F) is less than 4 ° C (8 ° F).	± 0.015%/℃	100Ω or more	Input-Output-Power Source: 2.0kV AC 1 minute	0 to 2.5%	Thermotical dating: K, input range: -200 ~ 1,370 ° C/-328 ~ 2,498 ° F	3-port insulation (between input-output-power supply)	Approximately 80g	DC voltage: 0 ~ 1V DC	Polycarbonate	Approximately 3.5va	Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities

Click on the part number for more information about each product

Customers who viewed this product also viewed

Converter EZ2

NITTOSEIKO CO., LTD.

Signal Converters

HD-TVI Camera System/AHD Camera System HD Analog (TVi/AHD/CVI → CVBS signal converter)

Security Design Co., Ltd.

Signal Converters

Water quality analysis parameters Supported water quality analytical conductivity convertible convertible LIQUISYS CLM253

Endress+Hauser Group Services AG

Signal Converters

Multi -series isolator (1 output) SGI

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Distributor with multi -series ratio setting (1 output) SGM

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Air -conditioning Series Split Callation Instruments (2 output) SGXW

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Air -conditioning control Series Limiter converter (1 output) SGC

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Alarm series implanted signal input input alarm setta (for 4-20mA, 1 to 5V only) (2 output) SGAL

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Alarm series universal input alarm setta (2 output) sgau

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Alarm series universal input alarm setta (4 output) sgau

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Standard Series District Viewer (1 output) SHD

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Distributor SBD

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Other products of Shinko Technos Co., Ltd.

Module-shaped adjustment QX1 Series communication expansion module QMC1-C □, QMC1-MT

Shinko Technos Co., Ltd.

Controllers

8 models listed

Communication transformer PCL interface unit SIF-600/SIF-400

Shinko Technos Co., Ltd.

2 models listed

Communication converter IF-400

Shinko Technos Co., Ltd.

Infrared sensor (non-contact) RD-715-HA

Shinko Technos Co., Ltd.

Non-Contact Temperature Sensors

SSR (Solid State Relay) SA-500 Series

Shinko Technos Co., Ltd.

Solid State Relays

3 models listed

Multi -series DC signal converter (2 output) SGSW

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Standard Series Measurement Temperature Removable Moder (2 Output) SHRW

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Temperature resistance body converter SE1R

Shinko Technos Co., Ltd.

Signal Converters

4 models listed

Distributor SBD

Shinko Technos Co., Ltd.

Signal Converters

10 models listed

Digital indicator derivative meter Aer-102-ECL (low concentration)

Shinko Technos Co., Ltd.

Conductivity Meters

6 models listed

Plug-in-type digital instruction turbidity/SS meter WIL-101-TU

Shinko Technos Co., Ltd.

Turbidimeters

4 models listed

On-site PH/ORP meter FEB-102-PH

Shinko Technos Co., Ltd.

pH Meters

3 models listed

View more products of Shinko Technos Co., Ltd.

About Company Handling This Product

Shinko Technos Co., Ltd.

Japan
Since 1945
185 employees

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Thermotical converter SBE Shinko Technos Co., Ltd.

About This Product

10 Models of Thermotical converter SBE

Customers who viewed this product also viewed

Other products of Shinko Technos Co., Ltd.

About Company Handling This Product

Related search keywords

Thermotical converter SBE
Shinko Technos Co., Ltd.