Digital instruction adjustment ACS-13A
Shinko Technos Co., Ltd.
About This Product
■ Space -saving, compact size
Compact with 48 x 48 x 62mm (W x H x D). 56 mm under the neck (54.5mm under the neck) because the gasket is attached for dustproof and drip -proof [IP66]. Contributes to space -saving in the control panel.
■ 11 segment LCD display adoption
11 Segment LCD is adopted. The alphabet is easier to understand.
■ PV display color switching other, display function enhancement
The color of the PV display can be selected according to your preference from red, green and orange. In addition, the display color can be changed by the deviation between PV and SV, and it is easy to check the control status.
■ Standard equipment with console connector
Connect to a personal computer with a USB port, you can set various settings and monitors by console software (SWS-ACS01M).
■ Standard equipment with output change rate limit function
It is a function that is friendly to heaters who dislike sudden changes in output. Ideal for heater control such as simple supermarkets.
■ Multi input, high -speed sampling
A total of 18 types: thermoelectric vs (10 types), measuring temperature resistors (2 types), DC current (2 types), and DC voltage (4 types). In addition to temperature control of injection molding machines, extruders, bags, packaging machines, dryers, electric furnaces, etc., it can also support various processes that make use of the high speed of 0.25 seconds in input sampling cycle.
■ Drip -proof / dustproof structure
It is an front IP66 structure that can be used in a harsh environment where dust and water is applied.
■ Abundant options
・ Set value memory number external selection function
With an external contact signal, you can switch the set value SV1 to SV4. It can also be used as a control output OUT/OFF external switching or automatic/manual control external switching.
・ Serial communication function
The communication protocol uses the world standard Modbus protocol (Modbus ASCII, Modbus RTU) as our standard and field network.
・ Hita disconnection warning output function
You can detect a single or three -phase heater, short circuit, or deterioration. In the case of three phases, connect two CTs.
・ Heat cooling control output function
In the cooling operation mode, you can select either air -cooled (linear characteristics), oil -cooled (1.5 -square characteristics), water -cooled (square characteristics). The cooling output is a relay contact or a non -contact voltage.
* There are other model numbers
-
Product
Digital instruction adjustment ACS-13A
-
Handling Company
Shinko Technos Co., Ltd.
-
Categories
4 Models of Digital instruction adjustment ACS-13A
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Accuracy (setting / instructions) Mass -resistant | Accuracy (setting / instructions) Thermotical electricity vs. 1 | Accuracy (setting / instructions) Thermotical electricity vs. 2 | Display MEMO display | Display PV display | Display SV display | Display labeling display | Input DC current | Input DC voltage 1 | Input DC voltage 2 | Input measurement temperature resistor | Input thermoelectric dating | Rated Range S input range | Rated range 0 ~ 20 MA DC input range | Rated range 0 ~ 5 V DC input range | Rated range 0-1 V DC input range | Rated range 0-10 V DC input range | Rated range 1 ~ 5 v DC input range | Rated range 4 ~ 20 MA DC input range | Rated range B input range | Rated range C (W/Re5-26) input range | Rated range E input input range | Rated range J input input range | Rated range JPT100 input range | Rated range K input input range | Rated range N input input range | Rated range PL-II input range | Rated range PT100 input range | Rated range R input range | Rated range T input range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ACS-13A-R/M, A2 |
Available upon quote | Within ± 0.1%± 1 digit or within ± 1 ° C (2 ° F) of each input span |
・ Within ± 0.2%± 1 digit or within ± 2 ° C (4 ° F) of each input span ・ However, the range of 0 to 200 ° C (32 to 392 ° F) by R or S input is within ± 6 ° C (12 ° F). |
・ The range of 0 to 300 ° C (32 to 572 ° F) by B input is outside the accuracy guarantee range. ・ K, J, E, T, N input is less than 0 ° C (32 ° F) within ± 0.4%± 1 digit of the input span. |
11 Segment LCD backlight green, character dimensions 4.8 x 2.8mm (height x width) | 11 Segment LCD backlight red/green/orange, character dimensions 12.0 x 5.4mm (height x width) | 11 Segment LCD backlight green, character dimensions 6.0 x 3.5mm (height x width) | Backlight orange |
・ 0 ~ 20mA DC, 4 ~ 20ma DC ・ Input impedance: 50Ω ・ Available input current: 50mA DC or less |
・ 0 ~ 1V DC ・ Input impedance: 1mΩ or more ・ Tolerance input voltage: 5V DC or less, allowable signal source resistance: 2kΩ or less |
・ 0 ~ 5V DC, 1 ~ 5V DC, 0 ~ 10V DC ・ Input impedance: 100kΩ or more ・ Tolerance input voltage: 15V DC or less, allowable signal source resistance: 100Ω or less |
・ PT100, JPT100 ・ 3 conductor type (permissible input donductor resistance per line: 10Ω or less) |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance: 100Ω or less, but in the case of B input, the external resistance is 40Ω or less. |
0 ~ 1760 ° C/0 ~ 3200 ° F | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -200 ~ 500 ° C/-320 ~ 900 ° F, -200.0 ~ 500.0 ° C/-320.0 ~ 900.0 ° F | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -200 ~ 850 ° C/-320 ~ 1500 ° F, -200.0 ~ 850.0 ° C/-320.0 ~ 1500.0 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° f |
|
|
ACS-13A-S/M, A2 |
Available upon quote | Within ± 0.1%± 1 digit or within ± 1 ° C (2 ° F) of each input span |
・ Within ± 0.2%± 1 digit or within ± 2 ° C (4 ° F) of each input span ・ However, the range of 0 to 200 ° C (32 to 392 ° F) by R or S input is within ± 6 ° C (12 ° F). |
・ The range of 0 to 300 ° C (32 to 572 ° F) by B input is outside the accuracy guarantee range. ・ K, J, E, T, N input is less than 0 ° C (32 ° F) within ± 0.4%± 1 digit of the input span. |
11 Segment LCD backlight green, character dimensions 4.8 x 2.8mm (height x width) | 11 Segment LCD backlight red/green/orange, character dimensions 12.0 x 5.4mm (height x width) | 11 Segment LCD backlight green, character dimensions 6.0 x 3.5mm (height x width) | Backlight orange |
・ 0 ~ 20mA DC, 4 ~ 20ma DC ・ Input impedance: 50Ω ・ Available input current: 50mA DC or less |
・ 0 ~ 1V DC ・ Input impedance: 1mΩ or more ・ Tolerance input voltage: 5V DC or less, allowable signal source resistance: 2kΩ or less |
・ 0 ~ 5V DC, 1 ~ 5V DC, 0 ~ 10V DC ・ Input impedance: 100kΩ or more ・ Tolerance input voltage: 15V DC or less, allowable signal source resistance: 100Ω or less |
・ PT100, JPT100 ・ 3 conductor type (permissible input donductor resistance per line: 10Ω or less) |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance: 100Ω or less, but in the case of B input, the external resistance is 40Ω or less. |
0 ~ 1760 ° C/0 ~ 3200 ° F | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -200 ~ 500 ° C/-320 ~ 900 ° F, -200.0 ~ 500.0 ° C/-320.0 ~ 900.0 ° F | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -200 ~ 850 ° C/-320 ~ 1500 ° F, -200.0 ~ 850.0 ° C/-320.0 ~ 1500.0 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° f |
|
|
ACS-13A-A/M, A2 |
Available upon quote | Within ± 0.1%± 1 digit or within ± 1 ° C (2 ° F) of each input span |
・ Within ± 0.2%± 1 digit or within ± 2 ° C (4 ° F) of each input span ・ However, the range of 0 to 200 ° C (32 to 392 ° F) by R or S input is within ± 6 ° C (12 ° F). |
・ The range of 0 to 300 ° C (32 to 572 ° F) by B input is outside the accuracy guarantee range. ・ K, J, E, T, N input is less than 0 ° C (32 ° F) within ± 0.4%± 1 digit of the input span. |
11 Segment LCD backlight green, character dimensions 4.8 x 2.8mm (height x width) | 11 Segment LCD backlight red/green/orange, character dimensions 12.0 x 5.4mm (height x width) | 11 Segment LCD backlight green, character dimensions 6.0 x 3.5mm (height x width) | Backlight orange |
・ 0 ~ 20mA DC, 4 ~ 20ma DC ・ Input impedance: 50Ω ・ Available input current: 50mA DC or less |
・ 0 ~ 1V DC ・ Input impedance: 1mΩ or more ・ Tolerance input voltage: 5V DC or less, allowable signal source resistance: 2kΩ or less |
・ 0 ~ 5V DC, 1 ~ 5V DC, 0 ~ 10V DC ・ Input impedance: 100kΩ or more ・ Tolerance input voltage: 15V DC or less, allowable signal source resistance: 100Ω or less |
・ PT100, JPT100 ・ 3 conductor type (permissible input donductor resistance per line: 10Ω or less) |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance: 100Ω or less, but in the case of B input, the external resistance is 40Ω or less. |
0 ~ 1760 ° C/0 ~ 3200 ° F | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -200 ~ 500 ° C/-320 ~ 900 ° F, -200.0 ~ 500.0 ° C/-320.0 ~ 900.0 ° F | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -200 ~ 850 ° C/-320 ~ 1500 ° F, -200.0 ~ 850.0 ° C/-320.0 ~ 1500.0 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° f |
|
|
ACS-13A-R/M 1, C5 |
Available upon quote | Within ± 0.1%± 1 digit or within ± 1 ° C (2 ° F) of each input span |
・ Within ± 0.2%± 1 digit or within ± 2 ° C (4 ° F) of each input span ・ However, the range of 0 to 200 ° C (32 to 392 ° F) by R or S input is within ± 6 ° C (12 ° F). |
・ The range of 0 to 300 ° C (32 to 572 ° F) by B input is outside the accuracy guarantee range. ・ K, J, E, T, N input is less than 0 ° C (32 ° F) within ± 0.4%± 1 digit of the input span. |
11 Segment LCD backlight green, character dimensions 4.8 x 2.8mm (height x width) | 11 Segment LCD backlight red/green/orange, character dimensions 12.0 x 5.4mm (height x width) | 11 Segment LCD backlight green, character dimensions 6.0 x 3.5mm (height x width) | Backlight orange |
・ 0 ~ 20mA DC, 4 ~ 20ma DC ・ Input impedance: 50Ω ・ Available input current: 50mA DC or less |
・ 0 ~ 1V DC ・ Input impedance: 1mΩ or more ・ Tolerance input voltage: 5V DC or less, allowable signal source resistance: 2kΩ or less |
・ 0 ~ 5V DC, 1 ~ 5V DC, 0 ~ 10V DC ・ Input impedance: 100kΩ or more ・ Tolerance input voltage: 15V DC or less, allowable signal source resistance: 100Ω or less |
・ PT100, JPT100 ・ 3 conductor type (permissible input donductor resistance per line: 10Ω or less) |
・ K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) ・ External resistance: 100Ω or less, but in the case of B input, the external resistance is 40Ω or less. |
0 ~ 1760 ° C/0 ~ 3200 ° F | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | -2000 ~ 10000 | 0 ~ 1820 ° C/0 ~ 3300 ° F | 0 ~ 2315 ° C/0 ~ 4200 ° F | -200 ~ 800 ° C/-320 ~ 1500 ° F | -200 ~ 1000 ° C/-320 ~ 1800 ° F | -200 ~ 500 ° C/-320 ~ 900 ° F, -200.0 ~ 500.0 ° C/-320.0 ~ 900.0 ° F | -200 ~ 1370 ° C/-320 ~ 2500 ° F, -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° F | -200 ~ 1300 ° C/-320 ~ 2300 ° F | 0 ~ 1390 ° C/0 ~ 2500 ° F | -200 ~ 850 ° C/-320 ~ 1500 ° F, -200.0 ~ 850.0 ° C/-320.0 ~ 1500.0 ° F | 0 ~ 1760 ° C/0 ~ 3200 ° F | -200.0 ~ 400.0 ° C/-320.0 ~ 750.0 ° f |
Click on the part number for more information about each product
Customers who viewed this product also viewed
![TABLETOP FREEZERv Small tabletop freezer GEL5 [for one batch 1 liter production]-UNO Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3004997202408261.png)
![TABLETOP FREEZERv Small tabletop freezer POKER [for one batch 2 liter production]-UNO Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3004997202408262.png)
Other products of Shinko Technos Co., Ltd.
View more products of Shinko Technos Co., Ltd.
About Company Handling This Product
- Japan