All Categories

History

  1. Metoree
  2. Development & Design
  3. CAD/CAM Systems
  4. CAM function for lathe processing LATHE (Senetec Co., Ltd.)
CAM function for lathe processing LATHE-LATHE
CAM function for lathe processing LATHE-Senetec Co., Ltd.

CAM function for lathe processing LATHE
Senetec Co., Ltd.

Senetec Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

9.2hours

Fast Response

About This Product

The LATHE module offers a wealth of processing programs for NC lathes tailored to various shapes. Programming is possible with simple operations such as rough removal, finishing, groove cutting, screw cutting, middle gesture, drilling. It also supports C -axis processing, and can be programmed for drilling and contour processing from the side and end direction.

■ Dynamic rosage

This is a highly efficient lathe rough processing that incorporates the Prime Turning method. The wearing rate of the tool edge is reduced to keep the tool load constant while calculating the contact angle of the tool for the material being processed. Efficiently cut and process, and automatically calculate the processing order with low air cuts.

■ Gralate cutting processing

One operation can be widely used, such as grooving in multiple areas and corresponding to complex shapes. The cutting pattern of the rough processing can be switched according to various shapes.

■ Screw cutting

This is a tool path that supports the screws inside, outside, and end face. It also supports taper and multi -art screws, and also supports processing that is difficult to create in the dialogue method. The screw shape can be set from JIS and ANSI/ASME standards.

■ 3D tool

It is possible to create a turning tool from the 3D -CAD data provided by the tool manufacturer. Compatible with interference checks in Verify (Verify, simulation with MasterCam standard) and touring settings by importing data from STEP standards.

■ C -axis cross -drill processing

You can create a drill processing from the outer diameter direction. The processing program can also drill holes in the center axis direction of the cylinder, and a hole processing that shifts the axis from the center of the cylinder. The direction of hole processing can be automatically obtained from the CAD data.

■ C -axial concert processing

Compatible with rotation out -of -the -box processing against cylinders. It is possible to program that requires complex rotary axis control, such as the outline processing that wraps the deployed diagram into the cylinder and the turning center processing while synchronizing the C -axis for the wrapped shape.

  • Product

    CAM function for lathe processing LATHE

Share this product


220+ people viewing

Last viewed: 16 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of CAM function for lathe processing LATHE

Image Part Number Price (excluding tax)
CAM function for lathe processing LATHE-Part Number-LATHE

LATHE

Available upon quote

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

2D CAM/2.5D CAM Machining/Milling NAZCA5 CAM Mill-Gordo Solution Co., Ltd.

2D CAM/2.5D CAM Machining/Milling NAZCA5 CAM Mill

Gordo Solution Co., Ltd.

200+ people viewing

Last viewed: 2 hours ago

Response time: 0.55 hours

CAD/CAM Systems

3 models listed

2D CAM NC lathe NAZCA5 CAM Lathe-Gordo Solution Co., Ltd.

2D CAM NC lathe NAZCA5 CAM Lathe

Gordo Solution Co., Ltd.

160+ people viewing

Last viewed: 2 hours ago

Response time: 0.55 hours

CAD/CAM Systems

3 models listed

Mastercam Surface/Solid Modeling & Drafting DESIGN-JBM Engineering Co., Ltd.

Mastercam Surface/Solid Modeling & Drafting DESIGN

JBM Engineering Co., Ltd.

20+ people viewing

Last viewed: 22 hours ago

CAD/CAM Systems

3 models listed

CAM function for 3 -axis Mill 3D-Senetec Co., Ltd.

CAM function for 3 -axis Mill 3D

Senetec Co., Ltd.

350+ people viewing

Last viewed: 5 hours ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

Yamaha offline software P-Tool cooperation Implementation CAM system Other PC-7/POT2 Series-PFA Co., Ltd.

Yamaha offline software P-Tool cooperation Implementation CAM system Other PC-7/POT2 Series

PFA Co., Ltd.

190+ people viewing

Last viewed: 1 hour ago

Response time: 92.87 hours

CAD/CAM Systems

5 models listed

2D CAM wire processing NAZCA5 CAM Wire-Gordo Solution Co., Ltd.

2D CAM wire processing NAZCA5 CAM Wire

Gordo Solution Co., Ltd.

160+ people viewing

Last viewed: 1 minute ago

Response time: 0.55 hours

CAD/CAM Systems

3 models listed

Mastercam 2-axis to 2-axis and half/single-face 3-axis milling MILL-JBM Engineering Co., Ltd.

Mastercam 2-axis to 2-axis and half/single-face 3-axis milling MILL

JBM Engineering Co., Ltd.

20+ people viewing

Last viewed: 19 hours ago

CAD/CAM Systems

3 models listed

Mounting CAM system PC-7-Yamaha Robotics Holdings Co., Ltd.

Mounting CAM system PC-7

Yamaha Robotics Holdings Co., Ltd.

70+ people viewing

Last viewed: 7 hours ago

Response time: 43.84 hours

CAD/CAM Systems

2 models listed

Laser CAD/CAM Nazca/SQ Laser-Gordo Solution Co., Ltd.

Laser CAD/CAM Nazca/SQ Laser

Gordo Solution Co., Ltd.

190+ people viewing

Last viewed: 2 hours ago

Response time: 0.55 hours

CAD/CAM Systems

3 models listed

CAD/CAM/Simulation-TK Holdings Co., Ltd.

CAD/CAM/Simulation

TK Holdings Co., Ltd.

30+ people viewing

Last viewed: 2 hours ago

CAD/CAM Systems

3 models listed

Mastercam Multi-surface simultaneous 3-axis milling MILL 3D-JBM Engineering Co., Ltd.

Mastercam Multi-surface simultaneous 3-axis milling MILL 3D

JBM Engineering Co., Ltd.

20+ people viewing

Last viewed: 7 hours ago

CAD/CAM Systems

2 models listed

Mastercam lathe machining LATHE-JBM Engineering Co., Ltd.

Mastercam lathe machining LATHE

JBM Engineering Co., Ltd.

20+ people viewing

Last viewed: 1 hour ago

CAD/CAM Systems

2 models listed

See More CAD/CAM Systems Products

Other products of Senetec Co., Ltd.

Reviews shown here are reviews of companies.

World Rating No. 1 3D Analysis Simulation FlexSim-Senetec Co., Ltd.

World Rating No. 1 3D Analysis Simulation FlexSim

Senetec Co., Ltd.

170+ people viewing

Response time: 9.17 hours

3D surfaces/Solid Modela (CAD) Design-Senetec Co., Ltd.

3D surfaces/Solid Modela (CAD) Design

Senetec Co., Ltd.

420+ people viewing

Last viewed: 4 hours ago

Response time: 9.17 hours

2D CAD

4 models listed

2 axis/2.5 axis/simple 3 -axis processing MILL-Senetec Co., Ltd.

2 axis/2.5 axis/simple 3 -axis processing MILL

Senetec Co., Ltd.

240+ people viewing

Response time: 9.17 hours

CAM function for 3 -axis Mill 3D-Senetec Co., Ltd.

CAM function for 3 -axis Mill 3D

Senetec Co., Ltd.

350+ people viewing

Last viewed: 5 hours ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

Simultaneous 5-axis processing CAM function (Mill 3D Optional) Multi-AXIS-Senetec Co., Ltd.

Simultaneous 5-axis processing CAM function (Mill 3D Optional) Multi-AXIS

Senetec Co., Ltd.

160+ people viewing

Response time: 9.17 hours

CAM function for complex processing LATHE & MILL-Senetec Co., Ltd.

CAM function for complex processing LATHE & MILL

Senetec Co., Ltd.

440+ people viewing

Last viewed: 2 minutes ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

Milltasking Machine Options Mill-Turn-Senetec Co., Ltd.

Milltasking Machine Options Mill-Turn

Senetec Co., Ltd.

210+ people viewing

Response time: 9.17 hours

CAM Wire for wire discharge machinery-Senetec Co., Ltd.

CAM Wire for wire discharge machinery

Senetec Co., Ltd.

470+ people viewing

Last viewed: 24 minutes ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

CAM function for relief processing (Mill option) ART-Senetec Co., Ltd.

CAM function for relief processing (Mill option) ART

Senetec Co., Ltd.

320+ people viewing

Response time: 9.17 hours

CAM function for woodworking Router-Senetec Co., Ltd.

CAM function for woodworking Router

Senetec Co., Ltd.

290+ people viewing

Last viewed: 1 hour ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed


View more products of Senetec Co., Ltd.

About Company Handling This Product

Senetec Co., Ltd.

Response Rate

100.0%

Response Time

9.2hrs

  • Japan

Related search keywords

CAD/CAM Systems
CAD/CAM Systems　Senetec Co., Ltd.
Senetec Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree