2 axis/2.5 axis/simple 3 -axis processing MILL
Senetec Co., Ltd.
About This Product
Compatible with 3D surfaces / solid modeling and 2 -axis processing (3D contour). A two -axis processing can be created from the wire frame or solid model. Compatible with the feature of the feature -based tool path and the tool path for high -speed processing. Furthermore, MasterCam X9 and later have a single -sided three -axis processing function.
The composite surfac parallel cut function provides a large amount of work efficiently, but also provides a flo -line finish that achieves a smooth finish and finishing with parallel cutting.
■ Model chamfer tool path
By selecting a solid edge or a face, you can easily create a horizontal chamfer on the model.
■ Discounted processing
You can create a tool path from all angles simply by specifying a tool plane. If the protection area is defined, it can be evacuated outside the area.
■ The front cut of the island
Automatically create a tool path for each depth for multi -stage pocket processing. Cut from outside the area so that there is no leftovers.
■ Wire frame processing
You can create a 2.5 -axis tool path using a wire frame. It is effective for the rotation shape, a cross -section, and the shape of the universal core.
■ Arc cut
The ideal hole processing using end mills, not drill, is possible. You can select Circle Mill, Thread Mill, Helix Bore, Throt Mill, etc.
■ Re -cutting function
By specifying the previous process and the rough tool diameter, an efficient tool path with less air cuts is created for the leftovers.
■ Wrap
It can be converted to a rotating tool path, centered on the axis specified by the created 2 -axis tool path.
■ Processing
・ Single side (rough / finishing)
・ Complex (rough / finishing)
You can use the same function as Mill 3D with a specific tool path. Create a rough / finish tool path by parallel processing from the 3D surface / solid model.
■ Mill series common function
・ Work model
・ Holder interference check
・ Chain preview
・ Check the reach of the tool
·nesting
・ Tool bus analysis
-
-
Product
2 axis/2.5 axis/simple 3 -axis processing MILL