Simultaneous 5-axis processing CAM function (Mill 3D Optional) Multi-AXIS
Senetec Co., Ltd.

You can easily create complex multi -axis tool paths such as impellers and turbine blade processing. Above all, it has a reputation for making axial control, and it is possible to create the control of the rotating axis according to the processing shape as desired. The output NC program can be used for all machine tools, and the model of the CNC controller does not matter. ■ Convert to 5 axis Easy to convert the tool path created by 2-3 axis to a 5 -axis tool path. It is a recommended function for those who create a 5 -axis tool path for the first time. ■ contour It is possible to output the contour pass along the wire frame as a 5 -axis process. As a result, it is easy to create a tool path for undercuts that are difficult for tools to reach and for parts that require deep -growing processing. ■ Swarf processing A composite axis processing that uses the side of the tool to process the ribs and wall side with the outer blade of the tool. ■ Pocket cutting You can create a 5 -axis rough tool path with less air cut along the model shape. ■ Flowline A tool path can be created from all the tool axis direction for the surface flow. High -precision and smooth finish. ■ Circle segment tool compatible It also supports barrel, taper barrel and lens as a high -efficiency processing tool. You can reduce the cutting time while maintaining high accuracy. ■ Holder tilt function Use the registered holder shape to automatically avoid interference between processing and touring. By enabling the holder tilt to the tool path created by the 3 -axis processing, the tools can be tilted and the efficient processing can be performed only in the parts where interference is detected. ■ Unified-contour morphing Create a tool path that slowly changes the processing route between the two curves for the switch to be cut. ■ Bali removal You can create a tool path to take a barby by specifying the edge of the 3D model. ■ Drill-Multi-axis You can create a drill tool path from the direction direct direction for the hole on the slope or the curved surface. ■ 3 + 2 Automatic roughness Analyze 3D model data and stock models to create a rough -portrait tool path by automatically determined. The discounted plane can be selected automatically or manually setting, and can be adjusted according to the needs.