All Categories

History

  1. Metoree
  2. Development & Design
  3. CAD/CAM Systems
  4. CAM function for 3 -axis Mill 3D (Senetec Co., Ltd.)
CAM function for 3 -axis Mill 3D-Mill 3D
CAM function for 3 -axis Mill 3D-Senetec Co., Ltd.

CAM function for 3 -axis Mill 3D
Senetec Co., Ltd.

Senetec Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

9.2hours

Fast Response

About This Product

MILL 3D is compatible with 3 -axis processing to 5 -axis division processing for composite surfaces. There are multiple processing patterns along with the rough finish and finish, so you can select a tool path according to the shape and material. In addition to the functions that can be used in the Design and Mill modules, it has a wide variety of simultaneous three -axis tool paths that can handle more complex free curved surfaces, so we can flexibly handle a wide range of processing.

■ Removal pocket processing

Processed by offset of the outer peripheral outset of the work, zigzag and swirls. Incorporation of ideas such as arc movements in the corner part, such as not applying a load on tools, are included everywhere.

■ optimal rough work (dynamic optimal roughness)

Cutting load is constant high efficiency processing. One cut can make a deep cutting. Cutting load is high -speed roughing with a constant horizontal cutting. With one tool path, you can cut the material in two directions: step-down (-z) and step-up (+Z). This high -efficiency two -way cutting method removes the maximum material with the minimum step -down, greatly reducing the processing time.

■ Area roughing

Cut from the outside, maintain the down cut, and cut it with a pitch.

■ Operating processing

Cut the part left behind in the rough processing process. Compared to the previous process, work model, and STL file, the leftovers are detected and cut.

■ Flowline processing

Create a tool path according to the flow of the surface.

■ Honor high -line processing

Z -axial cutting Inspiece of contemporary high -ray processing, you can automatically detect a gentle surface with a slope, and create an additional processed tool path for the area at the same time.

■ Hybrid

A steep slope and a gentle slope are performed with one operation without a runaway.

■ Blend processing

In order to gradually change the processing route between the two curves, it is possible to reduce the unnecessary cutting operation and cut it according to the shape.

■ Scallop etc.

Generate a tool path on a pitch for the selected curved surface. The surface accuracy can be kept uniform regardless of the characteristics of the shape (such as slow, steep slope, etc.).

■ Remaining processing

Cut the part left behind by the large tool in the previous process with a small -diameter tool.

■ Tool path optimization function

Controls the quality of the finished surface and the quality of the finished surface. The tool pass simplifies and uniforms, smoothes the operation of the machine tool, and compresses the data size of NC data.

  • Product

    CAM function for 3 -axis Mill 3D

Share this product


380+ people viewing

Last viewed: 7 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of CAM function for 3 -axis Mill 3D

Image Part Number Price (excluding tax)
CAM function for 3 -axis Mill 3D-Part Number-Mill 3D

Mill 3D

Available upon quote

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

2D CAM/2.5D CAM Machining/Milling NAZCA5 CAM Mill-Gordo Solution Co., Ltd.

2D CAM/2.5D CAM Machining/Milling NAZCA5 CAM Mill

Gordo Solution Co., Ltd.

270+ people viewing

Response time: 0.55 hours

CAD/CAM Systems

4 models listed

2D CAM NC lathe NAZCA5 CAM Lathe-Gordo Solution Co., Ltd.

2D CAM NC lathe NAZCA5 CAM Lathe

Gordo Solution Co., Ltd.

210+ people viewing

Last viewed: 36 minutes ago

Response time: 0.55 hours

CAD/CAM Systems

3 models listed

Mastercam Surface/Solid Modeling & Drafting DESIGN-JBM Engineering Co., Ltd.

Mastercam Surface/Solid Modeling & Drafting DESIGN

JBM Engineering Co., Ltd.

60+ people viewing

CAD/CAM Systems

3 models listed

Yamaha offline software P-Tool cooperation Implementation CAM system Other PC-7/POT2 Series-PFA Co., Ltd.

Yamaha offline software P-Tool cooperation Implementation CAM system Other PC-7/POT2 Series

PFA Co., Ltd.

260+ people viewing

Last viewed: 3 hours ago

Response time: 92.87 hours

CAD/CAM Systems

5 models listed

2D CAM wire processing NAZCA5 CAM Wire-Gordo Solution Co., Ltd.

2D CAM wire processing NAZCA5 CAM Wire

Gordo Solution Co., Ltd.

190+ people viewing

Response time: 0.55 hours

CAD/CAM Systems

3 models listed

Mastercam 2-axis to 2-axis and half/single-face 3-axis milling MILL-JBM Engineering Co., Ltd.

Mastercam 2-axis to 2-axis and half/single-face 3-axis milling MILL

JBM Engineering Co., Ltd.

70+ people viewing

CAD/CAM Systems

3 models listed

Mounting CAM system PC-7-Yamaha Robotics Holdings Co., Ltd.

Mounting CAM system PC-7

Yamaha Robotics Holdings Co., Ltd.

100+ people viewing

Last viewed: 2 hours ago

Response time: 43.84 hours

CAD/CAM Systems

2 models listed

Laser CAD/CAM Nazca/SQ Laser-Gordo Solution Co., Ltd.

Laser CAD/CAM Nazca/SQ Laser

Gordo Solution Co., Ltd.

220+ people viewing

Last viewed: 15 minutes ago

Response time: 0.55 hours

CAD/CAM Systems

3 models listed

Mastercam Multi-surface simultaneous 3-axis milling MILL 3D-JBM Engineering Co., Ltd.

Mastercam Multi-surface simultaneous 3-axis milling MILL 3D

JBM Engineering Co., Ltd.

70+ people viewing

Last viewed: 17 hours ago

CAD/CAM Systems

2 models listed

CAM function for lathe processing LATHE-Senetec Co., Ltd.

CAM function for lathe processing LATHE

Senetec Co., Ltd.

260+ people viewing

Last viewed: 6 hours ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

Mastercam lathe machining LATHE-JBM Engineering Co., Ltd.

Mastercam lathe machining LATHE

JBM Engineering Co., Ltd.

70+ people viewing

Last viewed: 6 hours ago

CAD/CAM Systems

2 models listed

CAM function for complex processing LATHE & MILL-Senetec Co., Ltd.

CAM function for complex processing LATHE & MILL

Senetec Co., Ltd.

470+ people viewing

Last viewed: 17 hours ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

See More CAD/CAM Systems Products

Other products of Senetec Co., Ltd.

Reviews shown here are reviews of companies.

World Rating No. 1 3D Analysis Simulation FlexSim-Senetec Co., Ltd.

World Rating No. 1 3D Analysis Simulation FlexSim

Senetec Co., Ltd.

190+ people viewing

Response time: 9.17 hours

3D surfaces/Solid Modela (CAD) Design-Senetec Co., Ltd.

3D surfaces/Solid Modela (CAD) Design

Senetec Co., Ltd.

470+ people viewing

Last viewed: 23 hours ago

Response time: 9.17 hours

2D CAD

4 models listed

2 axis/2.5 axis/simple 3 -axis processing MILL-Senetec Co., Ltd.

2 axis/2.5 axis/simple 3 -axis processing MILL

Senetec Co., Ltd.

260+ people viewing

Last viewed: 3 hours ago

Response time: 9.17 hours

Simultaneous 5-axis processing CAM function (Mill 3D Optional) Multi-AXIS-Senetec Co., Ltd.

Simultaneous 5-axis processing CAM function (Mill 3D Optional) Multi-AXIS

Senetec Co., Ltd.

190+ people viewing

Last viewed: 2 hours ago

Response time: 9.17 hours

CAM function for lathe processing LATHE-Senetec Co., Ltd.

CAM function for lathe processing LATHE

Senetec Co., Ltd.

260+ people viewing

Last viewed: 6 hours ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

CAM function for complex processing LATHE & MILL-Senetec Co., Ltd.

CAM function for complex processing LATHE & MILL

Senetec Co., Ltd.

470+ people viewing

Last viewed: 17 hours ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

Milltasking Machine Options Mill-Turn-Senetec Co., Ltd.

Milltasking Machine Options Mill-Turn

Senetec Co., Ltd.

240+ people viewing

Response time: 9.17 hours

CAM Wire for wire discharge machinery-Senetec Co., Ltd.

CAM Wire for wire discharge machinery

Senetec Co., Ltd.

520+ people viewing

Response time: 9.17 hours

CAD/CAM Systems

2 models listed

CAM function for relief processing (Mill option) ART-Senetec Co., Ltd.

CAM function for relief processing (Mill option) ART

Senetec Co., Ltd.

350+ people viewing

Response time: 9.17 hours

CAM function for woodworking Router-Senetec Co., Ltd.

CAM function for woodworking Router

Senetec Co., Ltd.

310+ people viewing

Last viewed: 9 hours ago

Response time: 9.17 hours

CAD/CAM Systems

2 models listed


View more products of Senetec Co., Ltd.

About Company Handling This Product

Senetec Co., Ltd.

Response Rate

100.0%

Response Time

9.2hrs

  • Japan

Related search keywords

CAD/CAM Systems
CAD/CAM Systems　Senetec Co., Ltd.
Senetec Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree