P series
Holai

Holai's Response Status

Response Rate

100.0%

Response Time

53.1hours

About This Product

Helical cutting method with low noise and low vibration panna crusher

feature
The use of a unique screen support structure has made it easy to replace the screen, making it easier to clean the pulver.
Since the sharp cutting is performed with an original helical cutter and a fixed blade, there is little powder and fine grains, and the runner of soft materials can be cut cleanly.
Holai's proprietary diagonal screens regulate long -term emissions, preventing post -process problems.
Since the rotating blade blade is an advance and detached adjustment type, the outer diameter can always be secured in the optimal state even if grinding is repeated.
Therefore, the processing power and granularity are always stable.

1. Promise low noise and low vibration!
The noise and vibration have been extremely low because of the low -speed rotation helical cutting method.

2. Easy to change screens and clean inside!
The use of a unique screen support structure has made it easy to replace the screen, making it easier to clean the pulver.

3. The crushed product has no long items and has less powder!
Since the sharp cutting is performed with an original helical cutter and a fixed blade, there is little generation of powder and fine grains. In addition, since the drainage of long items is regulated by the unique holes screaming, the trouble of the post -process can be prevented before.

4. Soft materials and hot Kanna are also clean cut!
In the cutting method using a helical cutter, you can also cut the runna and hot Kanna of soft materials cleanly.

5 .. Energy saving machine!

6. Demonstrate the maximum performance stably!
Since the rotating blade blade is in advance, the outer diameter can always be secured in the optimal state even if grinding is repeated. Therefore, the processing capacity granularity is always stable.

7. Excellent comprehensive performance!
Helical cutta, which uses the principle of scissors, has a small shock at the time of crushing, does not damage or chips, and leads to the longevity of the knife. In addition, a stable small load (power consumption) is realized. In the PS form, large runa can be processed smoothly by the push -in action of the Sculfider.

8. Defective molded products can also be crushed!
By adopting a unique J -shaped wall body, not only runa but also small and medium -sized molding and sloppy products can be crushed efficiently (excluding sculfida).
In particular, the P-1636 type has a rotating blade diameter of 160, the P-2060 type is 200, and the P-3060 type is 300, so it has a high performance for crushing molded defective products. In the case of a runner-focated and defective molded defective product small amount, a low noise PH-3060 type is a large molded defective product, and if you need a large processing power, you can select PC-3060.

Model
There are 9 models for this product.

Product
P series

Handling Company
Holai

Categories

Machining / Machine Tools

Shredders

1840+ people viewing

Last viewed: 18 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

9 Models of P series

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Rotating blade	Fixed blade	Body caliber	Introduction	screen	Exhaust box standard	Exhaust box high	Exhaust loader shoot	Shoot with dampa for emission loader	Exhaust loader box -type shoot	Machine dimensions low -shaped auxiliary shots	Machine dimensions low -shape auxiliary shot	Machine dimension No high -shaped auxiliary shots	Machine dimensions high -shaped auxiliary shot	Mass standard (low)	Mass and high -shaped	Nominal ability	motor	Sculfider drive motor	Introduction / Supply Sculufida	Introduction / supply feeder caliber	Machine dimensions standard (low -shaped)	Machine dimensions high
P-1314	Available upon quote	Helical cutter 2 blades *130 x W140 Blade: 4 pieces/stands	30 ° inclined 1 point	160x160 (140x130)	Introduction Hopper L type [Standard: NL type, SL type with auxiliary shot]	Under body fitting set method	About 32L	About 53L	About 5L	About 8L	About 12L	W535 × L625 × H970	W535 × L625 × H1090	W550 × L625 × H1170	W550 × L625 × H1290	Approximately 130㎏	Approximately 150㎏	-	-	-	-	-	-	-
P-1328	Available upon quote	Helical cutter 2 blades 130 x W280 Blade: 8 pieces/stands	30 ° inclined 1 point	300x160 (280x130)	Introduction Hopper L type [Standard: NL type, SL type with auxiliary shot]	Under body fitting set method	About 32L	About 53L	About 5L	About 8L	About 12L	W580 x L975 x H1050	W580 × L1045 × H1200	W595 × L975 × H1250	W595 × L1045 × H1400	Approximately 190㎏	Approximately 220㎏	20-60kg/HR	-	-	-	-	-	-
P-1342	Available upon quote	Helical cutter 2 blades 130 x W420 blade 12 pieces/stands	30 ° inclined 1 point	440x160 (420x130)	Introduction Hopper L type [Standard: NL type, SL type with auxiliary shot]	Under body fitting set method	About 65L	About 75L	About 11L	About 11L	About 26L	W720 x L975 x H1150	W720 × L1045 × H1300	W735 × L975 × H1250	W735 × L1045 × H1400	Approximately 250㎏	Approximately 280㎏	30-80kg/HR	200/220V 50/60Hz-6p.1.5kw	-	-	-	-	-
P-1636	Available upon quote	Helical cutter 3 blades 160 x W360 Blade: 12 pieces/stands	30 ° inclined 2 points	400x230 (360x160)	Introduction Hopper L type [Standard: NL type, SL type with auxiliary shot]	Screen receiving set method method	About 48L	-	9L	8L	-	W680 x L855 x H1300	W680 x L855 x H1300	-	-	Approximately 500㎏	-	70-150kg/HR	200/220V 50/60Hz-4P-3.7kw	-	-	-	-	-
P-2060	Available upon quote	Helical cutter 3 blades 200 x W600 Blade: 12 sheets/stands	30 ° inclined 2 points	640 x 250 (600x250)	Introduction Hopper L type / K -shaped	Screen receiving set method method	About 94L	-	-	-	-	W970 × L1040 × H1510	W970 × L1040 × H1510	-	-	Approximately 700㎏	-	100-250kg/HR	200/220V 50/60Hz-4P-7.5kw	-	-	-	-	-
PH-3060	Available upon quote	Helical cutter 2 blades 300 x W600 blade: 8 pieces/stands	30 ° inclined 2 points	640x350 (600 x 330)	Introduction Hopper L type / K -shaped	Screen receiving set method method	About 127L	-	-	-	50L	W100 × L1120 × H1780	W100 × L1120 × H1780	-	-	Approximately 1000㎏	-	50-100kg/HR	200/220V 50/60Hz 6p.5kw	-	-	-	-	-
PC-3060	Available upon quote	Closed cutter 3 blades 300 x W600 blade: 6 pieces/stands	30 ° inclined 2 points	640x350 (600 x 330)	Introduction Hopper L type / K -shaped	Screen receiving set method method	About 127L	-	-	-	50L	W1000 × L1195 × H1780	W1000 × L1195 × H1780	-	-	Approximately 1000㎏	-	150-300kg/HR	200/220V 50/60Hz-4P-11kW	-	-	-	-	-
PS-180	Available upon quote	Helical cutter 3 blades 160 x W180 Blade: 6/table	30 ° inclined 2 points	180x250	-	Screen receiving set method method	About 11L	About 23L	Approximately 2.5L	Approximately 6.0L	-	-	-	-	-	Approximately 410㎏	Approximately 420㎏	10-40kg/HR	Full closed type 200/220V 50/60Hz 6P 1.5kw	Full closed gard motor 200/220V 50/60Hz 4P 0.4kw (1/75)	φ160XP150	250 × 500 (height 725 [s])	W1240 x L810 x H955	W1240 x L810 x H1155
PS-360	Available upon quote	Helical cutter 3 blades 160 x W360 Blade: 12 pieces/stands	30 ° inclined 2 points	360x250	-	Screen receiving set method method	About 26L	About 49L	Approximately 5.5L	About 11L	-	-	-	-	-	Approximately 530㎏	Approximately 540㎏	30-80kg/HR	Full closed type 200/220V 50/60Hz 6P 2.2kw	Full closed gard motor 200/220V 50/60Hz 4P 0.75kw (1/75)	φ160XP180	300x600 (height 725 [s])	W1580 x L815 x H1035	W1580 x L815 x H1235

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

A wood crusher that fully demonstrates the performance of its engine.Tub grinder (wood crusher)

Maruma Technica Co., Ltd.

170+ people viewing

Last viewed: 3 hours ago

Response time: 10.13 hours

Shredders

4 models listed

2 -axis crusher with automatic foreign matter separation function NK type machine

Iihama Steelworks

570+ people viewing

Last viewed: 4 hours ago

Response time: 20.24 hours

Shredders

5 models listed

Crusher Crusher Roll Breaker RBT-1610

Maekawa Industries Co., Ltd.

70+ people viewing

Last viewed: 1 hour ago

Response time: 38.59 hours

Shredders

3 models listed

A self-propelled horizontal grinder (crusher/chipper) that achieves industry-leading crushing capacity, chip quality, and ease of maintenance.

Maruma Technica Co., Ltd.

260+ people viewing

Response time: 10.13 hours

Shredders

4 models listed

BO series

Holai

1100+ people viewing

Last viewed: 3 hours ago

Response time: 53.15 hours

Shredders

12 models listed

Crusher lions redder EVO

Iihama Steelworks

400+ people viewing

Last viewed: 3 hours ago

Response time: 20.24 hours

Shredders

Sand making machine bucket sand crusher

Furugaki Construction Co., Ltd.

90+ people viewing

Last viewed: 6 hours ago

Response time: 49.80 hours

Shredders

3 models listed

Small crusher PET bottle crusher for plastic crushing such as waste materials and PET bottles

Fujitex Co., Ltd.

5.0

320+ people viewing

Last viewed: 8 hours ago

Response time: 35.64 hours

Shredders

3 models listed

Crusher Crusher Roll Breaker RBT-1716

Maekawa Industries Co., Ltd.

40+ people viewing

Last viewed: 3 hours ago

Response time: 38.59 hours

Shredders

3 models listed

Electric wood crusher with high productivity, low noise, and low running cost Electric horizontal grinder (crusher/chipper)

Maruma Technica Co., Ltd.

140+ people viewing

Last viewed: 3 hours ago

Response time: 10.13 hours

Shredders

4 models listed

DB series

Holai

550+ people viewing

Last viewed: 10 hours ago

Response time: 53.15 hours

Shredders

Crusher recycling plant

Iihama Steelworks

270+ people viewing

Last viewed: 4 hours ago

Response time: 20.24 hours

Shredders

2 models listed

See More Shredders Products

Other products of Holai

Reviews shown here are reviews of companies.

BO series

Holai

1100+ people viewing

Last viewed: 3 hours ago

Response time: 53.15 hours

Shredders

12 models listed

DB series

Holai

550+ people viewing

Last viewed: 10 hours ago

Response time: 53.15 hours

Shredders

FG series

Holai

530+ people viewing

Last viewed: 2 hours ago

Response time: 53.15 hours

Shredders

3 models listed

KR series

Holai

460+ people viewing

Response time: 53.15 hours

Shredders

2 models listed

LC series

Holai

280+ people viewing

Last viewed: 24 seconds ago

Response time: 53.15 hours

Shredders

NS series

Holai

330+ people viewing

Last viewed: 13 hours ago

Response time: 53.15 hours

Shredders

QS series

Holai

260+ people viewing

Last viewed: 8 hours ago

Response time: 53.15 hours

Shredders

SWK series

Holai

350+ people viewing

Last viewed: 1 hour ago

Response time: 53.15 hours

Shredders

TP series

Holai

480+ people viewing

Last viewed: 1 hour ago

Response time: 53.15 hours

Shredders

Z series

Holai

1450+ people viewing

Last viewed: 10 minutes ago

Response time: 53.15 hours

Shredders

6 models listed

Gainax Crusher

Holai

1360+ people viewing

Last viewed: 5 hours ago

Response time: 53.15 hours

Shredders

3 models listed

Seat peletaizer

Holai

800+ people viewing

Last viewed: 15 hours ago

Response time: 53.15 hours

Shredders

View more products of Holai

About Company Handling This Product

Holai

Response Rate

100.0%

Response Time

53.1hrs

Company Overview

Horai, founded in 1949 and located in Osaka, Japan is a manufacturer of material processing and recycling equi...

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.