Two -color radiation thermometer that is less affected by radiation ratio and can accurately measure the temperature even if the visual field is lacking due to dirt of smoke and viewports.
(Made by Germany Sensortherm)
■ Applications
･ Measurement of in the furnace in the furnace over a dirty window
･ Temperature measurement in the steel industry with lots of smoke and water
･ Temperature measurement of fine lines in the extension process
■ Amazing response speed
･ The M3 series is the standard response speed of 1 msec standard
･ The H3 series achieves 80 μSec, the world's highest level as a two -color thermometer.
■ Abundant positioning method and optical system
･ Laser aim
･ Finder type that can be visible
･ Camera type that can be confirmed on the monitor
･ There is also an electric focus specification equipped with a motor
<Product features>
■ What is a two -color thermometer?
This is a radiation thermometer that uses two different measurement wavelengths and converts the ratio of each radiation to temperature.
Therefore, even if the radiant energy in which the radiation energy in which is usually difficult to measure is difficult to measure, the dirty window material, and the environment in which water vapor and dust will fly are reduced, the right temperature can be measured correctly because the radiation ratio is the same.
■ High speed & high accuracy
We have achieved high -speed and high -precision measurements that combine the latest two -color technology and the advantages of digital signal processing.
･ Equipped with two detectors corresponding to two wavelengths. Even if the signal intensity is low, you can surely record the measurement.
･ Digital micro controller signal processing that realizes 100%reproducibility of the displayed measurement value.
-It can also be used to monitor infrared rays and warns for lenses and window contamination.
■ The world's highest response speed with a two -color thermometer
In the M3 series, the fastest 1msec is standard for all models. You can adjust the smoothing up to 10 seconds with a variable type. In the H3 series, the world's highest response speed 80 μSec was achieved as a two -color thermometer. Ideal for temperature measurement and control such as laser welding and heating.
■ Small work can also be measured
The minimum spot size is φ0.8mm by the optimized optimized optimized optimized optimization. Measurement of smaller work is now possible.
■ Operating focus type, movable focus with motor
It can be adjusted continuously within the specified minimum and maximum measurement distance, and can be adjusted to the as much as possible in its focal length.
■ You can select the aiming method
Equipped with a laser aim to make the positioning easier. In addition, there is a founder type for visually seeing the measurement objects, and a camera type for checking on the monitor.
■ Abundant input / output
･ RS232C/RS485 interface (switchable)
PLC and Sensortools software are possible through serial interfaces. If you build software, it will be possible to set the measured values and change the parameters directly.
･ Analog 0 or 4-20mA (2 points output)
It can be connected to an optional temperature indicator or a temperature control.
■ SENSORTOOLS software (standard accessories)
･ Up to four measurement data can be measured and displayed at the same time.
･ 2 color temperature + 1 color temperature can be displayed at the same time.
･ Laser aim ON/OFF and electric focus adjustment, etc.
