All Categories

History

High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series-FLR503- □
High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series-FUTEX co., ltd.

High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series
FUTEX co., ltd.

FUTEX co., ltd.'s Response Status

Response Rate

100.0%

Response Time

14.1hours

Relatively Fast Response


About This Product

■ FLR503 (50kV), FLR403 (40kV), FLR303 (30kV), each + / -total 6 series lineup

・ It is the optimal specification for research and development of charging particles such as electronic source, ion source, and electrostatic lenses that require high accuracy and initial experiments. ・ As well as manual operation, various remote control and monitor function are standard equipment. It is easy to support systemization. ・ The ripple monitor terminal is standard equipment, and it is possible to check the ripple of the power supply itself and the radio waveform on the high -pressure output side (load side).

  • Product

    High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series

Share this product


520+ people viewing

Last viewed: 1 hour ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

3 Models of High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Output voltage Output voltage monitor Rated output current Ripple noise Ripple voltage monitor DC stability Temperature coefficient Input fluctuation rate Load variable rate Output setting External input Protection circuit Input voltage control method Switching method Boosting system Outer diameter dimensions Voltage monitor accuracy Output voltage control (local) Output voltage control (remote) Protection function ① Protection function ➁ Output display Output current monitor usage environment accessories option
High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series-Part Number-FLR503- □

FLR503- □

Available upon quote

0.1kv ~ 50kv

D-Sub connector: 0 to 50kv → 0-10V

250μA MAX

≦ 5ppm (250mVP-P) @50kv/100 μA

Monitor the discharge of the load side and high -speed fluctuations (20Hz to 2MHz)

10ppm/h or less

10ppm/℃ or less

Within 20 ppm for fluctuation of AC input voltage ± 10%

50 ppm or less @ fluctuations in total load at maximum output voltage

Rotary encoder

0-10V → 0 to 50kv

Over -voltage: 55kV, overcurrent protection: 275 μA

Single -phase 100VAC ± 10% 50/60Hz

Continent voltage control

Freback Pushpur type + zero bolt switching

Freback Trans + Symmetric Cock Croft / Walton Circuit

482W x 88H x 452D

≦ ± 0.1% (5kv to 50kV)

By the front panel rotary encoder

External control voltage 0VDC ~+10VDC or RS-232C control

Over -voltage protection (110%rated) over volt. LED lighting / overcurrent protection (rated 110%Limit) Over Curent. LED lighting

Interlock Protection (Limit by door open) Interlock LED Lighting / Power Power Power Power Power Prevention

Output current (selected i-moni on Select switch) in the front panel "I/v monitor", output voltage (selected V-MONI with SELECT switch)

10V/maximum output current

Installation location → Indoor temperature →+0 to 40 ° C humidity → 0%to 85%RH (without condensation)

High -pressure cable 3m (RG11/U Customer terminal unprocessed), AC cable (2m)

LAN (LANTRONIX)

High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series-Part Number-FLR403- □

FLR403- □

Available upon quote

0.1kv ~ 40kv

D-Sub connector: 0 to 40kv → 0-10V

250μA MAX

≦ 5ppm (200mVP-P) @40kv/100 μA

Monitor the discharge of the load side and high -speed fluctuations (20Hz to 2MHz)

10ppm/h or less

10ppm/℃ or less

Within 20 ppm for fluctuation of AC input voltage ± 10%

50 ppm or less @ fluctuations in total load at maximum output voltage

Rotary encoder

0-10V → 0 to 40kv

Over -voltage: 44kV, overcurrent protection: 275 μA

Single -phase 100VAC ± 10% 50/60Hz

Continent voltage control

Freback Pushpur type + zero bolt switching

Freback Trans + Symmetric Cock Croft / Walton Circuit

482W x 88H x 452D

≦ ± 0.1% (5kv to 40kv)

By the front panel rotary encoder

External control voltage 0VDC ~+10VDC or RS-232C control

Over -voltage protection (110%rated) over volt. LED lighting / overcurrent protection (rated 110%Limit) Over Curent. LED lighting

Interlock Protection (Limit by door open) Interlock LED Lighting / Power Power Power Power Power Prevention

Output current (selected i-moni on Select switch) in the front panel "I/v monitor", output voltage (selected V-MONI with SELECT switch)

10V/maximum output current

Installation location → Indoor temperature →+0 to 40 ° C humidity → 0%to 85%RH (without condensation)

High -pressure cable 3m (RG11/U Customer terminal unprocessed), AC cable (2m)

LAN (LANTRONIX)

High -performance DC high -voltage power supply ultra -low ripple noise, high stability fixed voltage power supply FLR series-Part Number-FLR303- □

FLR303- □

Available upon quote

0.1kv ~ 30kv

D-Sub connector: 0 to 30kV → 0-10V

250μA MAX

≦ 5ppm (150mVP-P) @30kv/100 μA

Monitor the discharge of the load side and high -speed fluctuations (20Hz to 2MHz)

10ppm/h or less

10ppm/℃ or less

Within 20 ppm for fluctuation of AC input voltage ± 10%

50 ppm or less @ fluctuations in total load at maximum output voltage

Rotary encoder

0-10V → 0 to 30kv

Over -voltage: 33kV, overcurrent protection: 275 μA

Single -phase 100VAC ± 10% 50/60Hz

Continent voltage control

Freback Pushpur type + zero bolt switching

Freback Trans + Symmetric Cock Croft / Walton Circuit

482W x 88H x 452D

≦ ± 0.1% (5kv to 30kV)

By the front panel rotary encoder

External control voltage 0VDC ~+10VDC or RS-232C control

Over -voltage protection (110%rated) Over Volt. LED lighting, overcurrent protection (110%rated) Over Curent. LED lighting

Interlock protection (Limit with door open) Interlock LED lighting, high -pressure re -output prevention when power out of power outage

Output current (selected i-moni on Select switch) in the front panel "I/v monitor", output voltage (selected V-MONI with SELECT switch)

10V/maximum output current

Installation location → Indoor temperature →+0 to 40 ° C humidity → 0%to 85%RH (without condensation)

High -pressure cable 3m (RG11/U Customer terminal unprocessed), AC cable (2m)

LAN (LANTRONIX)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More High Voltage Power Supply Units Products

Other products of FUTEX co., ltd.

Reviews shown here are reviews of companies.


View more products of FUTEX co., ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

14.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree