Optimal power supply noise cut CVCF for EMI measurement
Denken Seiki Research Institute
About This Product
In addition to the high -precision output stabilization function, it is also used as an indefinite power supply (additional battery bank).
This is the optimal power supply for EMI measurement by combining high -efficiency, low -priced inverter frequency converter and noise cut transformer ™ ️. Stable sine wave power that is resistant to outpatient disorders and no noise at all is supplied to the test equipment with the required voltage and frequency. It is small and lightweight, low -cost, and reduces equipment burden, and does not have to run costs such as electricity bills.
■ Characteristics
･ Efficiency 80 % or more
･ Small, lightweight, low price
･ ± 1 % constant voltage function
･ Small capacity (510va) to large capacity (100kVA) can be produced
■ Optional
･ No power outage is also possible
･ Voltage switching / continuous variable voltage is also possible
･ Single -phase / three -phase structure is also possible
-
Product
Optimal power supply noise cut CVCF for EMI measurement
-
Handling Company
Denken Seiki Research Institute
1 Models of Optimal power supply noise cut CVCF for EMI measurement
| Product Image | Part Number | Price (excluding tax) | Exchange -powered voltage | Input frequency | Input voltage fluctuation tolerance range | Insulation resistance | Noise blocking characteristics | Operation peripheral temperature | Operation surroundings | Output current tolerance | Output frequency | Output voltage accuracy | Output voltage strain distortion rate | Place to use | Power factor | Rated input voltage | Rated output capacity | Rated output voltage | efficiency |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
RTI-N |
Available upon quote | 1500V50 / 60Hz 1 minute (between circuit-housing, input-output) | 45Hz to 65Hz | -15%~+10% | 10mΩ or more (between DC1000V circuit-housing, input-output) | Differential mode (normal mode) 10KHz ~ 100MHz -50db or less Common mode DC ~ 100MHz -50db or less. | -10 ° C to 40 ℃ | Relative humidity 45-85% (without condensation) | 0-100 % (at 0.7 to 1.0) | 50Hz / 60Hz ± 0.01% (switch switching) | Input voltage fluctuation -15%to+10%± 1%load fluctuation 0 to 100%to -5% | 2%or less (rated input, full load) | Corrosive gas, remarkable conductive dustless, breathable indoor atmosphere | 0.7 or more (when rated input / resistance all load) | 100V | Single -phase 510va, 1KVA, 2KVA, 3KVA, 5kva | 100V | 80%or more (when rated input / full load) |
Customers who viewed this product also viewed
Other products of Denken Seiki Research Institute
View more products of Denken Seiki Research Institute
