MCR-H700U | High-performance DPM compatible 2D cord hand scanner MCR-H700 / H711 series
Ma Stoken Solution
Price (excluding tax)
Model Description
Equipped with PLC link function (RS-232C model) If you set the barcode data writing memory address in the PLC to the scanner, write the loaded barcode data to the specified memory automatically. PLC programming is only memory monitoring logic, which is usually used to development. Of course, you can use the PLC memory to write data. Wireless (Bluetooth) model is also available MCR-H701B/MCR-H711B MCR-H701B (standard type) MCR-H711B (Reading Reading) MBA-300 Since the reading result can be sent to the host PC by wireless (Bluetooth communication), the readable range is less restricted and the workability is improved. The dedicated Bluetooth receiver MBA-300 is available in three types: USB model, RS-232C model, and Ethernet model. Bluetooth maximum communication distance (reference value): Approximately 10m in outlook * It fluctuates depending on the obstacle (human body, metal wall, etc.) and radio wave conditions. * Charging stand (MBC-700) and AC adapter are sold separately. * Bluetooth receiver (MBA-300) is sold separately. * MCR-H700B/H710B and TMA-6000/U are discontinued. MCR-H710 model appeared with one unit for "Read Read" and "Wide Bar Code" Compatible with "Read Read" and "Wide Bar Code" The DPM (Direct Part Marking) reader had a special lighting and enabled readable marking with low print quality, so it had to be read in a state close to contact with the work. In addition, the reading range was limited because the reading distance was close to work. ◎ The scanner reading part such as uneven casting items cannot be approached to DPM! ◎ I want to read a wide slip barcode with a DPM scanner! The MCR-H710 is a DPM scanner, but can also support "Read Read" and "Wide Barcode". * Due to the minimum resolution and difficulty reading, it may not be possible to respond unless it is MCR-H700. We have a static electricity (ESD) countermeasure model We are one of the few manufacturers that have been working on research and development of static electricity measures for many years. At the site where electronic components are manufactured, including LCD devices, the destruction and deterioration of microcomputers by ESD is essential, and finished manufacturers have attracted attention as an important item for reliability evaluation. Our E -SD countermeasure scanner uses materials that use new technologies, low -ion contamination, and low -out gas.
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
2D
Image sensor
Minimum cell size
Reading angle
Reading distance * Change according to the minimum cell size
barcode
illumination
interface
-
Part Number
MCR-H700U
-
Handling Company
Ma Stoken Solution
High-performance DPM compatible 2D cord hand scanner MCR-H700 / H711 series MCR-H700U's performance table
Items marked with have different values depending on the model number.
| Product Image | Price (excluding tax) | 2D | Image sensor | Minimum cell size | Reading angle | Reading distance * Change according to the minimum cell size | barcode | illumination | interface |
|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | DataMATRIX (ECC200) QRCODEMICROQRCODE | 1/3 inch CMOS black and white 1280 (x) x 960 (Y) | 0.1mm | The surface of the work and the reading window is parallel, the tilt rotation direction is free | 18-27mm (cell size 0.1mm:) 0 to 30mm (cell size 0.125mm or more) | Code39code128/GS1-128 (EAN128) CODABAR (NW7) ITF (interleaded 2OF5) JAN/EAN/UPCGS1DATABAR (RSS) Code93 | White LED / Red LED, peak wavelength 632nm | USB & HID |
There are 5 models for this product.
Customers who viewed this product also viewed
Other products of Ma Stoken Solution
View more products of Ma Stoken Solution
