This section provides an overview for machine vises as well as their applications and principles. Also, please take a look at the list of 38 machine vise manufacturers and their company rankings. Here are the top-ranked machine vise companies as of October, 2024: 1.OK-VISE, 2.BISON USA Corp., 3.International Machine Tools and Equipment Inc..
Table of Contents
A machine vise is a jig that is attached to a table or machine to hold the object in place so that it does not move when processing metal plates and other materials. They are mainly used for processing, such as milling, grinding, and drilling. By using a machine vice to precisely and strongly fix an object, the X, Y, and Z axes can be made accurate and the accuracy of machining can be improved.
However, a powerful load is applied during machining, so care must be taken to avoid lifting even when using a machine vise.
It is important to select a machine vise that is compatible with the machine to be processed, such as a milling machine or machining center.
Machine vises are used to fix objects in machining centers and milling machines. In most cases, machine vises are clamped to a table, etc. Some models are fixed to an electromagnetic chuck for precision machining, while some models are equipped with a function to prevent lifting during machining.
There are machine vises made of cast iron to withstand powerful work, and other materials to suit the application. Machine Vises are also available in sizes ranging from small to large, depending on the object to be processed.
Screws or shafts are used to clamp and secure the object to the table or equipment. There are two types of fixing methods: handle-type and wrench-type.
In the handle-type, once the object is clamped in the machine vise, simply turn the handle to secure it in place.
In the wrench-tightening type, the object is clamped in the machine vise, and the shaft is fixed in the groove hole on the side by turning the wrench and moving the movable mouthpiece.
Take care that the object is clamped in a slightly loose position and that the shaft is properly seated in the groove hole. As you tighten the rod bolt, the shaft acts as a fulcrum to pinch and secure the object. Tightening the rod bolt when the shaft is just caught in the groove hole may cause failure.
Normally, a machine vise is clamped to a table, but there are cases where a machine vise is fixed on a milling machine using an electromagnetic chuck.
The machining direction is usually one direction, but with models such as a sign vise with an inclination, a two-dimensional vise in which the vise itself rotates, and a three-dimensional vise, you can set the machining direction by yourself.
*Including some distributors, etc.
Sort by Features
Sort by Area
Suburban Tool, Inc., situated at AuBum Hills, Michigan, is a manufacturer and supplier of workholding products and inspection equipment. The company’s products include but aren’t limited to gage pin sets, angle blocks, index fixtures, lapping plates, and height gages. They also provide customized products for clients tailormade for the client’s specific needs. The Company is registered with CCR and is a supplier to military bases and government organizations under government contracts..
Dorsey Metrology International, a Poughkeepsie, US-based company established in 1955, is a manufacturer of precision handheld and bench-top dimensional measurement instruments and a supplier of pertinent services. The company provides indicating devices, direct reading gages, large diameter gages, and optical comparators. It also offers calibration, contract manufacturing, engineering, and repair services. The products of the company are used as tools to do measurements. It has passed ISO/IEC 17025:2017 certification, indicating the competence of its laboratories.
Thomas C. Wilson, LLC, founded in 1925 and headquartered in Long Island City, New York, is a manufacturer of pipe cleaning equipment and HVAC maintenance systems. The company specializes in producing a wide range of products for pipe cleaning, inspecting, and maintaining boilers, heat exchangers, and other industrial equipment. Its main products include chiller tube cleaners, tube expanders, heat exchanger tube plugs, boiler tools, and HVAC system cleaners. These tools find applications in industries such as plumbing, petrochemical, and HVAC maintenance.
Carr Lane Roemheld Mfg. Co., established in 1952 and headquartered in Missouri, United States, is a manufacturer and supplier specializing in workholding and tooling solutions. The company offers a diverse range of products and services, including toggle clamps, hydraulic workholding, and quick die change systems. Catering to various industries, including manufacturing, automotive, aerospace, and precision engineering, its products find application in securing workpieces, molds, and tools, ensuring stable and precise machining and assembly operations.
SCHUNK, founded in 1945 and based in Morrisville, USA, is a manufacturer of automation technology. The company provides technologies like gripping, tool holding and automation technology for modern manufacturing and robot systems. It also supplies complete solutions for robot systems as well as for a wide variety of production and automation processes. The company has received several awards for its technologies, which includes Engelberger Robotics Award in 2010 and Red Dot Award for Product Design in 2021.
Erowa AG, established in 1971 and headquartered in Büron, Switzerland, is a manufacturer of industrial automation equipment and machines. The company's core products include precision clamping systems, measuring machines, and loading robots. It also supplies process control software and mold-making machines. Its services include operator training, technical maintenance services, and measuring equipment checks. It owns 11 subsidiaries and 22 representations, offering global sales and service. Its notable clients include the Komax Group, NBF GmbH, and Mayweg GmbH.
BISON USA Corp, established in 1948 and based in Hamilton, Ohio, is a manufacturer of machine tools. The company's extensive product portfolio includes VDI tool holders, milling fixtures, lathe chucks, machine, and bench vises. The products have a precise fixture and clamping force, making them appropriate for mining, construction, oil, and gas applications. As an ISO 9001:2001-certified company, it also offers customer services, technical support, and help with product selection, maintenance, and troubleshooting.
Jergens, Inc. established in Cleveland, OH in 1942 is a manufacturer of Workholding, Lifting and Specialty Fasteners products. Their product portfolio includes clamps, vises, fixtures, and chucks, used for precise and stable workpiece positioning in machining and assembly processes. The company serves industries Renewable Energy, Mining and Exploration, Marine and Offshore, Electronics and Semiconductors and Telecommunications. The company has ISO 9001:2015 and AS9100:2016 certification and have global delivery and customer support..
Dapra Corporation, founded in 1955, and headquartered in Bloomfield, Connecticut, USA, is a supplier and a manufacturer of manufacturing tools and equipment. The company offers a broad range of products, including indexable milling tools, workholding vises, pneumatic power tools, dot peen, and lasers. The company also offers DataMatrix reading and verification solutions, as well as high-feed square shoulder button, face ball nose, and back draft tools. These products are widely used across various manufacturing sectors, including aerospace, automotive, mold and die, and firearms. It offers USA certified service in-house for all warranty repairs.
Shars Tool is an American wholesale distributor of industrial equipment and machinery that was established in 1978 in Saint Charles, Illinois. The company stocks various hand and power tools, abrasives, and cutting tools, as well as machinery like mills and lathes. They also offer material handling equipment like carts and bins, as well as safety accessories like goggles and gloves. Shars Tool chiefly serves client companies and businesses in the metalworking, DIY, home maintenance, and hobby markets, as well as select e-retailers such as LittleMachineShop.com.
Thwing-Albert Instrument Co., established in 1899, manufactures advanced testing apparatus in the United States, and the company's headquarters are located in West Berlin, NJ. Thwing-Albert has been a famous provider of testing equipment for over a century, establishing itself as a highly regarded expert in physical testing standards. Research laboratories and quality control departments globally depend on the cost-effective precision instruments provided by Thwing-Albert to facilitate the development and manufacturing of superior-quality products.
BGS technic KG, based in Wermelskirchen, Germany, has been a manufacturer that specializes in producing hand tools and workshop equipment since 1970. Its extensive product range encompasses socket sets, spanners, pliers, hammers, screwdrivers, pullers, automotive tools, pneumatic tools, and workshop equipment. These tools cater to the needs of both professional and hobbyist mechanics. All of its products are supplied directly from its modern central logistics facility in German and English packaging.
GEDORE is a German manufacturer of standard and industrial tools that was founded in 1919 in Remscheid, North Rhine-Westphalia. The company produces various hand tools such as wrenches, chisels, and hammers, as well as torque tools including torque multipliers and testers. It also offers specialty tool sets, such as electrical and plumbing toolkits. GEDORE maintains a network of subsidiaries and sales partners in more than 70 countries, with production facilities in South Africa, Brazil, England, and Austria.
SAM Outillage, established in 1921 and located in Auvergne Rhone Alpes, France, is a manufacturer of hand tools and smart connected storage solutions. The company offers a range of products including screwdrivers, sockets, wrenches, and hammers. It also provides smart tools that allow operators to manage their settings via a single interface. The company's screw extractor allows the extraction of screws to the left and right and not overlooking the carrier in the concrete anchor. In 2023, the company won the Ecovadis bronze medal, and serves industries such as automotive, aeronautics, defense, and more.
Maxion Jänsch & Ortlepp GmbH, founded in 1990, is a German manufacturer based in Pößneck, Thuringia, offering drilling machines. The company’s machine lineup includes a selection of bench, column, and flow drilling machines. It also develops coordinate drilling cross tables and Turret drilling heads. The company also offers tapping machines and various hand tools. It further provides services such as deep-hole drilling, as well as computerized numerical control (CNC) milling, turning, and cylindrical grinding.
wolfcraft GmbH is an award-winning tools and power tool accessories manufacturer and supplier founded in 1949 in Kempenich, Germany. The company's product portfolio includes machine accessories, workshop equipment, transport devices, and hand and project tools. In addition, more than 550 of its developments are protected by patents. Its one handed clamp earned the Red Dot Design Award, and its VLC 800 vinyl and laminate cutter won a PLUS X Award. Its plastic-free packaged goods are used in many DIY fields, such as renovations, gardening, workshops, transport, removals, and more. The firm offers extended warranties ranging from 5 to 10 years.
HOMGE MACHINERY IND. CO., LTD, founded in Taiwan in 1978, is an ISO manufacturer of milling accessories and products. The company's product portfolio includes tool holders that are engineered to securely grip milling tools and maintain rigidity during machining, minimizing vibrations and enhancing surface finish quality, clamping systems that offer stability and precision during milling operations, and a wide range of milling cutters, including end mills, face mills, and specialty cutters.
Japan Automatic Machine Co. (JAM) primarily serves the automotive industry and related industries. JAM provides development, manufacturing and sales of automatic wire processing machines, terminals, connectors, electronic components, precision vices, precision presses, precision tools and instruments, progressive die and injection mold tooling, and other related products. JAM is headquartered in Japan and has offices globally.
Hongli Pipe Machinery, founded in 1986 in Hangzhou, Zhejiang Province, China, is a manufacturer of pipe threading machines, grooving machines, pipe cutting machines, and other pipe-related equipment. These machines improve efficiency and precision in various pipe-related tasks, such as threading, grooving, and cutting. The products are equipped with durability, accuracy, and ease of use and are essential tools for professionals in the plumbing, construction, and pipeline industries. The company distributes products not only in China but also in international markets, as a provider of optimal-quality pipe machinery solutions. It has obtained ISO, CE, SGS, and BIS certifications.
Vektek LLC was founded in 1974, based in Saint Joseph, Missouri, US, and is a manufacturer and supplier of hydraulic clamping products. The ISO 9001:2015 certified company provides pneumatic, hydraulic, metric, and 1000psi/70bar/7MPa. Vektek LLC products are suitable for improving production and efficiency in heavy equipment, aerospace, and automotive industries. Its hydraulic clamping offers accurate and secure holding during assembly and machining. Also, it provides after-sales services, customized solutions, and technical support.
Palmgren, founded in Naperville, Illinois, in 1919, is a manufacturer of drills and milling machines. The company's product portfolio includes Drilling Machines, vertical milling machines, horizontal milling machines, and CNC milling machines. Their products are used for drilling and milling for construction materials and structures, general manufacturing and production processes, machining for aerospace components and milling for automotive components and parts. They also offer custom packaging, warehousing, and distribution services.
OK-VISE, founded in Muurame, Keski-Suomi, in 1984 is a manufacturer of work holding clamps. The company's product portfolio includes Low-profile clamps and a rotary pallet system designed for vertical machining centers, Rotary pallet systems, Tooling blocks, Grid Systems and Blanks System. Their products are used in precision machining and assembly processes in aircraft manufacturing, streamlining production and improving quality in automotive assembly lines, and precise cuts and joins in furniture and cabinetry production.
Virax, established in 1920 and headquartered in France, is a manufacturer and supplier of plumbing and pipe tools. The company's product categories include pipe cutters, threading tools, wrenches, among other plumbing and pipe-related equipment such as copper pipe cutters, manual threaders, gas tightness controllers, press-fitting machines, and more. It serves professionals in the plumbing and construction industries with products for precise and efficient pipe cutting, threading, and plumbing tasks, ensuring effective installations and repairs.
Hoffmann SE is a supplier and distributor of quality tools, workshop equipment, and personal protective equipment that was established in 1919 and is based in Munich, Germany. The company’s product portfolio includes hand tools, power tools, measuring tools, clamping tools, cutting tools. The performance, excellence, and dependability of the tools, workshop equipment, and personal protective equipment have been carefully considered. The products are utilized in various industries, including metalworking, automotive, aerospace, jewelry, and electronics. Additionally, it is designed with energy efficiency and environmental compliance in mind.
Wilton Tools, a JPW Industries Company, was established in 1941, is a tool manufacturing company based in the United States. The company offers a wide range of top-notch tools for professionals in many sectors, including metalworking, woodworking, and construction. With an extensive distribution network, they are a major player in industrial workholding equipment and striking tools. They still are manufacturing combo pipe and bench, and machinist bullet vises in the United States.
International Machine Tools and Equipment Inc., located in Richmond Hill, ON, since 1999, has been a supplier of self-brand and OEM VDI, CNC milling, and other tool holders, as well as work holding equipment, and of machine tools, ranging from traditional lathes and mills to high-speed CNC machining centers. The tool holders are utilized for CNC milling applications, boring bars, collets and collet chucks, vises, and other tool-holding and work-holding equipment following the stringent requirements of HSK, DIN, ANSI, and BT standards.
5th Axis, founded in San Diego, CA, in 2004 is a supplier of cutting edge automation hardware. The company's product portfolio includes Double Station Vises, Dovetail Cutters, Dovetail Fixtures, Fixture Pyramids and Integrated Tombstones. The company offers services such as consultation to assess automation needs and recommend tailored solutions., installation and integration of hardware into existing systems, technical support to ensure optimal performance and user proficiency and after sales support.
Ranking as of October 2024
Derivation MethodRank | Company | Click Share |
---|---|---|
1 | OK-VISE |
8.0%
|
2 | BISON USA Corp. |
7.8%
|
3 | International Machine Tools and Equipment Inc. |
5.2%
|
4 | Jergens, Inc. |
4.7%
|
5 | Palmgren |
4.5%
|
6 | Wilton |
3.7%
|
7 | Suburban Tool, Inc. |
3.7%
|
8 | wolfcraft GmbH |
3.4%
|
9 | Shars Tool |
3.4%
|
10 | SCHUNK |
3.4%
|
Derivation Method
The ranking is calculated based on the click share within the machine vise page as of October 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
Country | Number of Companies | Share (%) |
---|---|---|
United States of America | 13 | 56.5% |
Germany | 4 | 17.4% |
Japan | 2 | 8.7% |
United Kingdom | 2 | 8.7% |
France | 1 | 4.3% |
Taiwan | 1 | 4.3% |
2 products are listed.
Kawatatek Co., Ltd.
30+ people viewing
■ Carbal claws The new carbail nail has been adopted to reduce the height of the grid to 3.5mm. It has the effect of pushing the processing materia...