126 Hydraulic Hose Manufacturers in 2024
This section provides an overview for hydraulic hose as well as their applications and principles. Also, please take a look at the list of 126 hydraulic hose manufacturers and their company rankings. Here are the top-ranked hydraulic hose companies as of November, 2024: 1.HANSA-FLEX USA, 2.Danfoss Industrial Automation, 3.Kurt Manufacturing.
Table of Contents
What Is a Hydraulic Hose?
A hydraulic hose is a hose that serves as a flow path for hydraulic fluid in hydraulically powered equipment.
Hydraulic power is the power generated by a hydraulic pump that converts power from an engine or motor. It is mainly used in construction equipment because even a small pump can generate a large amount of power.
Unlike water hoses, they are designed to withstand higher pressures than those of ordinary household water supply systems. In recent years, hydraulic hoses are increasingly being used as an alternative to conventional hydraulic piping, such as steel pipes and rigid pipes.
Uses of Hydraulic Hoses
As an essential product for hydraulic equipment and flexible piping that can be used in high-pressure environments, hydraulic hoses are used in construction equipment such as hydraulic excavators and wheel loaders, and in factory equipment such as injection molding machines and die-casting machines.
Comparing hydraulic hose with hydraulic piping, hydraulic hose is more flexible and lightweight, and therefore has a higher degree of freedom.
Principle of Hydraulic Hoses
Hydraulic hose is used as the hydraulic oil flow path for hydraulic power and is made of thicker rubber hose compared to the water hose used in ordinary households. Hydraulic pipes used as flow paths for hydraulic power are subject to fatigue failure, such as cracking, due to vibration caused by the rotation of hydraulic pumps. Maintenance is also difficult in such cases.
Hydraulic hoses, on the other hand, are easier to maintain than hydraulic pipes. In recent years, hoses that can withstand high loads have been produced, depending on the application and type of use, and hydraulic hose is increasingly replacing hydraulic pipe.
How to Select Hydraulic Hoses
The following are the six minimum items that must be checked when selecting a hydraulic hose:
- Confirm the type of fluid used.
- Select the inside diameter of the Hydraulic Hose based on the flow rate and velocity of the fluid to be used.
- Check the maximum working pressure.
- Check the temperature and ambient temperature of the fluid to be used.
- Check the minimum bending radius of the Hydraulic Hose after confirming its installation position.
- Check the type of fittings
Incorrect selection of hydraulic hose can cause problems such as damage to the hydraulic hose and the inability of the machine to perform at its full capacity. To select the right Hydraulic Hose, it is necessary to have extensive knowledge of fluids, fittings, and hydraulic equipment.
Other Information on Hydraulic Hoses
1. Fittings
A hydraulic hose is subjected to high pressure loads, so it is common to use special fittings for joints with hydraulic equipment. The role of the fitting is to prevent the hydraulic hose from disconnecting due to the high pressure of hydraulic pressure.
For example, taking water pressure as an example, when a hose is connected to a faucet to let out water, if the faucet is turned fully open and water is let out under high water pressure, the holding force of the hose will be outmatched by the force of the hose and faucet to let out water, causing the hose to disconnect. To prevent this, the faucet and hose should be banded or wired together.
Since hydraulic pressure is higher than that of water, the nipple and socket of a fitting are combined to make it structurally stronger. Advantages of fitting fittings include easy connection and disconnection, no need for seals, etc. as they can be combined as a single unit, and flexible piping as the angle can be freely adjusted by the degree of tightening.
2. Installation and Maintenance
Hydraulic hoses are flexible and are often attached to moving parts. The design must take into account the possibility of damage due to contact with the peripheral equipment of the machine. Since the hydraulic oil flowing inside the hose is under high pressure, if the hose is damaged, the hydraulic oil will be sprayed out at high pressure. Since it is very dangerous for workers to be exposed to high-pressure oil, hydraulic hoses should be protected as necessary.
Hydraulic hoses are mainly made of rubber, and it is generally recommended to replace them once every two years to prevent damage due to deterioration.
List of 126 Hydraulic Hose Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Austria
- Belgium
- China
- Denmark
- Germany
- India
- Italy
- Japan
- Malaysia
- Spain
- Sweden
- Taiwan
- Ukraine
- United Kingdom
-
-
-
-
-
MicroStrain, a LORD Company
Hydraulic Hose
Manufacturer Overview
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
-
-
-
-
-
Danfoss Industrial Automation
Danfoss rubber hydraulic hose
Manufacturer Overview
Danfoss was founded in 1933 in Nordborg, Denmark where it remains today. The company serves automotive, food & beverage, energy & natural resources, wastewater, and mobile hydraulics industries as a manufacturer of power systems and industrial hydraulics. The company operates through three business segments: Danfoss Power Solutions, Danfoss Climate Solutions, and Danfoss Drives. Danfoss Power Solutions produces electronic controls, hydraulic power units, and cylinders. Climate Solutions produces heat exchangers, burner components, hydraulic heating, and sight glasses. Drives produce gear motors, low and medium voltage drives, and various software solutions for operating drives.
-
-
-
-
-
Gates Corporation
Hydraulic Hose
Manufacturer Overview
Gates Industrial Corporation began in 1911 in Denver Colorado where the company remains today, with additional headquarters in Europe and Asia. The company is a manufacturer of power transmission and fluid power solutions to customers around the world in industries such as agriculture construction, automotive, mining, and heavy-duty industrial equipment. The company’s products include CVT transmission belts, serpentine kits, hydraulic hoses, electric water pumps for electric vehicles, and rubber synchronous belts used in material handling applications.
-
-
-
-
-
Kurt Manufacturing
Hydraulic Hose
Manufacturer Overview
Founded in 1946, Kurt is an employee-owned manufacturer in Minneapolis, specializing in contract machining, aluminum die casting, and hydraulic hoses. With over 500,000 square feet of manufacturing space and 500 workers, Kurt is a leading name in manufacturing. The company's legacy of quality products makes them a trusted partner for businesses. In agriculture, Kurt Hydraulics offers a comprehensive line of tractor hoses and couplings. With a large stock of hydraulic hoses, they ensure timely deliveries, allowing farmers to focus on their work rather than equipment.
-
-
-
-
-
Unisource Manufacturing Inc.
Hydraulic Hose
Manufacturer Overview
Unisource Manufacturing Inc., founded in Portland, OR, in 1980 is a manufacturer of hose products, expansion joints and hydraulic hose and fittings. The company's product portfolio includes flex connectors for HVAC applications, Sanitary hoses and fittings, Air and Multipurpose Hoses, and industrial hoses used in tank truck service, chemical handling, oil refining and food processing. Their products are used in industries such as Food and Beverage, Pharmaceutical and Biotechnology, Chemical and Petrochemical, Environmental Testing and healthcare.
-
-
-
-
-
The Briggs Company
Hydraulic Hose
Manufacturer Overview
The Briggs Company is headquartered in New Castle, Delaware, with sales offices in Virginia and Pennsylvania. The company is a custom manufacturer of transfer-related products and coupling retention technology for all industries, also offering design, fabrication, and distribution services. The company is a member of the Hose Safety Institute and NAHAD, the National Association of Hose and Accessories Distribution. The company offers pipe & fittings, hoses and assemblies, industrial fittings & disconnects, and other industrial rubber products.
-
-
-
-
-
Swagelok
Hydraulic Hose
Manufacturer Overview
Swagelok Company was founded in 1947 in Cleveland, Ohio as a tube fitting manufacturer. The company serves numerous industries including the chemical, clean energy, food & beverage, industrial machinery, life sciences, and wastewater treatment industries. The copmany's product categories include hoses and flexible tubing, sample cylinders, welding systems, tubing and accessories, and measurement devices. The company's also offers engineering services including field engineering, onsite services, design and assembly services, training, and construction services.
-
-
-
-
-
SparTek Industries
Hydraulic Hose
Manufacturer Overview
SparTek Industries began in 1971 as Superior Plywood in Portland, Oregon. The company is a manufacturer of process machinery used in pressing, gluing, and material handling industries including wood, rubber, and composite panels. The company has three segments: Configured Solutions, Parts & Supplies, and Services. Configured Solutions produces machines used in material handling, machines used for sawing and clipping, hydraulic presses, and gluing & extrusion equipment. Parts & Supplies cover replacement parts and consumables. Services include engineering services, product and design evaluation, as well as consulting with ROI analysis.
-
-
-
-
-
Southern Rubber Co. Inc.
Hydraulic Hose
Manufacturer Overview
Southern Rubber Co. Inc. was chartered in 1925 and is headquartered in Greensboro, North Carolina. The company is an ISO 9001:2015 certified manufacturer and fabricator of rubber-based products. The company’s product segments include gaskets, extrusions, industrial hoses & tubing, adhesives, and O-rings & seals. The company provides both stock and custom offerings compatible with military and various commercial standard requirements. The company also produces prototypes of various components from customer drawings.
-
-
-
-
-
Southeastern Hose, Inc.
Hydraulic Hose
Manufacturer Overview
Southeastern Hose, Inc. founded in 1963 and headquartered in Bremen, Georgia, is a fabricator, manufacturer and supplier of hose and fluid assemblies. Their product range includes industrial hoses, expansion joints, HVAC products, and accessories. These products serve various industries such as oil and gas, food, transportation, and aerospace. Southeastern Hose's offerings are utilized for fluid conveyance, suction and discharge, material handling, and chemical transfer applications. Their solutions enable efficient and safe fluid management in industrial settings.
-
-
-
-
-
Schroeder Industries
Hydraulic Hose
Manufacturer Overview
Schroeder Industries was founded in 1946 and is headquartered in Leetsdale, Pennsylvania. The company is an ISO 9001-certified manufacturer and designer of advanced fluid conditioning solutions for markets including automotive, power generation, steel making, water treatment, and bulk fuels. The company’s primary product categories include filter systems, filters, and Internet of Things diagnostics. The company also offers services including sensor calibration, fluid contamination audit, rental equipment, and filtration management as a service (FMAAS) solutions.
-
-
-
-
-
Piranha Hose Products, Inc.
Hydraulic Hose
Manufacturer Overview
Piranha Hose Products, Inc., established in 1959, and are headquartered in Cadillac, Michigan, is a manufacturer of high pressure hoses for sewer cleaning, paint spraying, and hydraulic applications. It offers a product range including, sewer cleaning hoses, paint spray hoses, and hydraulic hoses, where it cater to industries such as sewer cleaning, hydraulics, paint spraying, agriculture, and manufacturing. It's products are used in efficient fluid transport, industrial painting applications, and hydraulic systems in these industries.The company holds ISO 9001 certification, ensuring quality and performance in every hose offered.
-
-
-
-
-
Mercer Gasket & Shim
Hydraulic Hose
Manufacturer Overview
Mercer Gasket & Shim, Inc. established in Bellmawr, New Jersey in 1919 is a manufacturer of gaskets and expansion joints. that are used in refining industries. Their product portfolio includes Metallic Gaskets, Jacketed Gaskets, Kammprofile Gaskets, Spiral Wound Gaskets, and non-Metallic Gaskets. The company has 7,000 square foot facility with 25 employees and has ISO 9001-2015 certification. They also provide cutting machines, including Knives, Laser, Waterjet, and Die cutting that can cut any material from thin plastic to thick steel. The company has a national distribution network and a customer support center.
-
-
-
-
-
Kuriyama of America, Inc.
Hydraulic Hose
Manufacturer Overview
Kuriyama of America Inc., established in 1968 and based in Schaumburg, Illinois, is a manufacturer of an expansive line of thermoplastic hoses and accessories. The company stocks rubber, thermoplastic, and metal products for industrial and commercial applications, alongside accessories such as fittings and couplings. It is part of the eight subsidiaries of the parent company, and it has six distribution centers and an academy to help consumers learn about its products. It stocks products from subsidiaries like Piranha Hose Products Inc., Kuri Tec, and Hose Tec.
-
-
-
-
-
Jergens, Inc.
Hydraulic Hose
Manufacturer Overview
Jergens, Inc. established in Cleveland, OH in 1942 is a manufacturer of Workholding, Lifting and Specialty Fasteners products. Their product portfolio includes clamps, vises, fixtures, and chucks, used for precise and stable workpiece positioning in machining and assembly processes. The company serves industries Renewable Energy, Mining and Exploration, Marine and Offshore, Electronics and Semiconductors and Telecommunications. The company has ISO 9001:2015 and AS9100:2016 certification and have global delivery and customer support..
-
-
-
-
-
HYSECO, Inc.
Hydraulic Hose
Manufacturer Overview
Hyseco, Inc. was established in 1972 and is based in Houston, Texas. Hyseco is a full-service hydraulic and fluid power in-house and field service company. Hyseco offers surplus merchandise and a full line of accessories for sale including hoses, fittings, gauges, heat exchangers, and more. Hyseco offers services in 5 categories: custom cylinders, metal fabrication, CNC machining, wire EDM, and hydraulic repair and service. Hyseco has a full machine shop with honing and custom fabrication capabilities, along with full-service hydraulic gear pump and motor facilities.
-
-
-
-
-
HYDAC Technology Corporation
Hydraulic Hose
Manufacturer Overview
HYDAC technology Corporation was founded in 1963 and has head offices globally. HYDAC is a manufacturer and designer of hydraulic, electronic, control, and fluid conditioning solutions optimized for mobile and industrial applications. HYDAC serves the agricultural, forestry, automotive, construction machinery, machine tools, material handling, mining, municipal, oil & gas, power generation, primary metals, pulp & paper, and wind energy markets. HYDAC’s product offerings include hydraulic and lube filters, accumulators, valves, cooling systems, electric sensors & controls, filter systems, and IoT diagnostics, process filters, fuel filtration, power units, cylinders, and related accessories.
-
-
-
-
-
Hosecraft USA
Hydraulic Hose
Manufacturer Overview
Hosecraft USA, since 1979, has been a manufacturer of industrial hoses, metal & rubber expansion joints, flexible connectors, and piping accessories such as reels, clamps, fittings, and nozzles. The hoses have different applications: suction, pressure wash & spray, discharge, and material handling. The Chicago, IL-based company provides miscellaneous accessories such as suction hose strainers, brass ball valves, brass gate valves, and hot hose sleeves using materials such as PVC, PTFE, silicone, and composite for different fittings to serve the chemical, petroleum, food & beverage, construction, and oil industries.
-
-
-
-
-
Hannay Reels Inc.
Hydraulic Hose
Manufacturer Overview
Hannay Reels is a manufacturer company of durable hose and cable reels that is headquartered in Westerlo, New York and was established in 1933. The company manufactures durable hose and cable reels for Original Equipment Manufacturer (OEM) and aftermarket applications with thousands of standard models. The company offers a wide range of product portfolio including audio and video reels, aviation reels, hose reels, rescue reels, and corrosive chemical reels. The company also offers replacement and additional parts for customers as well as packages such as air/water reel, lube/hydraulic reel, welding reel, and live cable reel packages.
-
-
-
-
-
Fluid Tech Hydraulics, Inc.
Hydraulic Hose
Manufacturer Overview
Fluid Tech Hydraulics, Inc. has a 30-year history and is based in Sacramento, California. Fluid Tech Hydraulics manufactures, designs, repairs, and sells industrial fittings and machinery. Fluid Tech Hydraulic’s product line includes hydraulic hose & fittings, industrial hose & fittings, hydraulic hammers/breakers, hydraulic pumps, motors, and components, cylinders/rams, and industry-related tools. Service offerings include hydraulic cylinders, machine shop services, welding & fabrication, component repair & sales, hydraulic hammers, equipment repair, fabrication, & special products.
-
-
-
-
-
Coronet Parts Mfg. Co., Inc.
Hydraulic Hose
Manufacturer Overview
Coronet Parts Manufacturing Company Inc. was founded in the early 1960s and headquartered in Brooklyn, New York. The company is a custom manufacturer of industrial hardware and fittings serving the automotive industry and plumbing industry among others. The company’s product lines include fittings, valves, assemblies, and other tools. Plumbing specialty items include tank levers, flood stoppers, and supply tubes. Assorted tools include tube cutters, bending tools, flaring tools, and related parts.
-
-
-
-
-
Clean Planet Manufacturing & Labs, Inc.
Hydraulic Hose
Manufacturer Overview
Clean Planet Manufacturing & Labs, Inc. was established in 2006 and is an American manufacturer company of fluid management products headquartered in Staunton, Virginia, United States. The company's products portofolio listed various fluid management products, including Oil Evac valve kit, brackets, shuttles, custom tanks, and stainless oil pans. The company also offer supporting services such as installation training, environmental technician certification, consultations, CNC lathe machining, and fabricating services. The company is partnered with Tunnel to Towers Foundation which provides mortgage-free homes for veteran and disaster victims.
-
-
-
-
-
Cenflex, Inc.
Hydraulic Hose
Manufacturer Overview
Cenflex, founded in 1992 and based in Weston, Wisconsin, USA, is a manufacturer of flexible metal hoses and fittings. Their product range includes stainless steel, aluminum, and nickel-plated hoses utilized for various industrial applications involving air, water, and gas. Additionally, they offer fittings like elbows, tees, and reducers that enable seamless connections with the flexible metal hoses, regulating fluid flow. Other products provided by Cenflex include expansion joints, bellows, and flexible couplings, which play a vital role in absorbing vibration and safeguarding equipment from shocks. Cenflex earned ISO 9001 certification for its quality management throughout the organization.
-
-
-
-
-
Bay Rubber Company
Hydraulic Hose
Manufacturer Overview
Bay Rubber Company, established in 1952 and based in California, USA, is a manufacturer and distributor of commercial and consumer rubber products and components. The company is a fabricating distributor and contract manufacturer of custom products to serve industries like aerospace, chemical and healthcare. It produces rubber products and components including the assembly of fluid transfer systems, industrial hoses and seals. The company can produce original designs and drawings created by the customers through its CAD/CAM cutter and C02 laser processing technology.
-
-
-
-
-
Atlantic Rubber Company, Inc
Hydraulic Hose
Manufacturer Overview
Atlantic Rubber Company, Inc. is headquartered in Littleton, Massachusetts. The ISO 9001-certified company is a manufacturer of precision rubber and plastic products, serving the industrial, military, pharmaceutical, and commercial markets with application design, advanced manufacturing procedures, and quality control. The company manufactures with most available plastic and rubber compounds including Latex, PVC, Nylon, pure gum, and EPDM. The company’s product line includes rubber tubing, standard and custom rubber O-rings, lab products, rubber grommets, and molded rubber products.
-
-
-
-
-
Arcadian Services
Hydraulic Hose
Manufacturer Overview
Arcadian Services, founded in 1988, is a manufacturer of chemicals and equipment used in car and truck wash industries and purposes such as power washing, industrial cleaners, and cleaners. The chemicals include waxes & protectants, wheel & tire cleaners and treatment, presoaks, hand sanitisers and private labelling. The company in Florence, Alabama, offers car wash equipment such as touchless in-bay automatic, soft cloth in-bay automatic, tunnel system and self-service system. The equipment services such as maintenance, installation and remodelling are offered.
-
-
-
-
-
Allied-Locke Industries
Hydraulic Hose
Manufacturer Overview
Allied-Locke Industries., established in Dixon, IL, in 1965 is a supplier of Agricultural Chain, Industrial Chain, Environmental Products & Sprockets. Their product portfolio includes Agricultural Roller Chain Assemblies, Aprons, Flights & Slats. Their products are used for agricultural machinery, including tractors, combines, and harvesters, and material handling for grains, seeds, and other agricultural products. The company also provides services including national distribution, product selection, installation, repair and customer and technical service.
-
-
-
-
-
Aero Rubber Company, Inc
Hydraulic Hose
Manufacturer Overview
Aero Rubber Company began in 1973 and is a family-run business based in Tinley Park, Illinois. Aero Rubbery Company is a custom manufacturer of rubber components such as tubing, sheeting, seals, and gaskets. Aero also offers fabrication services including die cutting, water-jet and lathe cutting, slitting, and vulcanized splicing. Aero Rubber is an ISO 9001:2015 certified company. Aero Rubber manufacturers use materials such as Viton, Neoprene, EPDM, silicone, and rubber materials. Aero Rubber manufacturing includes molded parts such as gaskets, extruded parts, sheeting, fabricated parts, and mandrel-made parts. Value-added capabilities are also offered.
-
-
-
-
-
HFI Fluid Power Products
Hydraulic Hose Assemblies
Company Overview
HFI Fluid Power Products., founded in the United States in 1962, is a distributor and manufacturer of fluid power components. The company's product portfolio includes hydraulic and pneumatic cylinders, pumps, valves, hoses, fittings, and more. Its products are used in heavy equipment and machinery, farming machinery, the oil and gas industry and the aerospace sector. In 1993, HFI added on a new 30,000 sq. ft. production facility to accommodate increased OEM business for custom tube and hose assemblies.
-
-
-
-
-
Titan Fittings
Hydraulic Hose
Company Overview
Titans Fittings, established in 2012, based in Denver, Colorado is a manufacturer and distributor of stainless steel fittings, adapters, valves, hose ends, hose and tubing. The company’s products serve the instrumentation, hydraulics and PVF markets. Additionally, it distributes thousands of products from other reputable manufacturers. It is a global supplier of standard fittings for a broad range of industrial and commercial applications, including the aerospace, military, manufacturing, scientific research, and power generation. The company is ISO 9001:2015 certified.
-
-
-
-
-
U.S. Rubber Supply Co.
Hydraulic Hose
Company Overview
US Rubber Supply Company is headquartered in Brooklyn, New York. The company is a manufacturer and stocking distributor of standard and custom rubber goods and other services for OEM, military, and various commercial industries. The company’s product lineup includes bumpers & fenders, expansion joints, hose & fittings, snow plow blades, and window products. The company offers complete die-cutting and molding extruding services and offers custom fabrication capabilities to customer specifications. Just-in-time delivery on all rubber goods is also available.
-
-
-
-
-
Seal Fast, Inc.
Hydraulic Hose
Company Overview
Seal Fast, Inc. was founded in 1933 and is headquartered in Houston, Texas. Seal Fast is a distributor of sealing and fitting products. Seal Fast product categories include couplings, fire protection, gauges, pipe fittings and valves, hose and hose protection, and sheet rubber. Couplings include cam and groove, dry disconnect, shank, ring lock, foot valves, brass fittings, hydraulics, clamps, and banjo couplings. Fire protection equipment also includes gaskets, and industrial ground monitors. Gauges include siphons, oxygen, and thermowells. Pipe fittings and valves include combination nipples and flanges. Hose and hose protection include Fire hoses and industrial rubber. Sheet rubber includes skirt board and cloth insert neoprene.
-
-
-
-
-
SC Fastening Systems
Hydraulic Hose
Company Overview
SC Fastening Systems hailing from Macedonia, OH is an industrial and construction supply distributer that provides value-added services. Product lines include fasteners, concrete anchors, abrasives, cutting tools, safety, janitorial, welding, paints and chemicals, material handling, tools and equipment, electrical, hydraulics and pneumatics, and lifting and rigging. Additionally, SC Fastening Systems offers specialty parts for niche industries such as laundry chute parts and custom hinges. SC Fastening Systems also offers services including inventory management and supply chain solutions, modified parts, kitting, assembly and special packaging, and fire protection products and services.
-
-
-
-
-
ProPulse, a Schieffer Company
Hydraulic Hose
Company Overview
ProPulse, A Schieffer Company is a manufacturer and distributor of hoses for several industries, including agriculture, construction and forestry, material handling, utility, and transportation industries. First called Schieffer GmbH & Co., the company was established in 1923 and rebuilt in 1945. In 2015, the company name was changed to its current name, ProPulse, A Schieffer Company. ProPulse’s product line includes rubber hydraulic hoses, thermoplastic hydraulic hoses, thermoplastic grease lubrication lines, and pressure washer hoses. The company also offers engineering services and prototyping on top of assembling hoses.
-
-
-
-
-
Petersen Products Co.
Hydraulic Hose
Company Overview
Peterson Products Company is based in Fredonia, Wisconsin and has a history dating back to its first patent issued in 1916. Peterson Products Company is ISO 9001:2015 certified manufacturer and distributor of products designed to assist customers with wastewater, tunneling, plumbing, and pipeline needs. Peterson’s product categories include annular seals, contractor tools, custom inflatable tools, custom manufacturing, inflation accessories and fittings, lifting bags and pipe handlers, pecker carriers, high pressure pipe plugs, chemical resistant pipe plugs, temperature and pressure gauges, and test equipment.
-
-
-
-
-
Ohio Power Tool
Hydraulic Hose
Company Overview
Ohio Power Tool, Inc was founded in Columbus, OH in 1983. OPT has 3 primary operating segments: sales, rental, and repair. Sales and rental segments include air compressors and other air tools, concrete & masonry saws, concrete core drills, cordless and electric corded tools, gas detection, generators, hand tools, hydraulic cylinders and pumps, inspection equipment, jobsite cleanup equipment, ladders and lifting equipment, levels, pipe cutting & threading equipment, as well as safety and storage equipment. The repair segment includes testing and recalibration and uses factory parts.
-
-
-
-
-
Metro Hydraulic
Hydraulic Hose
Company Overview
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
-
-
-
-
-
McGill Hose and Coupling, Inc.
Hydraulic Hose
Company Overview
McGill Hose & Coupling was founded in 1962 and is headquartered in East Longmeadow, Massachusetts. The company is a distributor of flexible hose and other fluid-handling products and services throughout the Northeast United States. The company primarily serves large and small industrial, food & beverage, pharmaceutical, and fuel transport industries. The company’s hose and product lines include a vast array of hose, fluoropolymer, and ducting varieties, rail car loading and unloading products, fire safety accessories, and other related products. The company offers custom fabrication and distribution as well as aftermarket services including solution engineering, fabrication, bending, and certification.
-
-
-
-
-
Kinnear Specialties
Hydraulic Hose
Company Overview
Kinnear Specialties, Inc. is a family-owned business founded in 1969 and based in Saint Helens, Oregon. Kinear Specialties is a manufacturer of custom hydraulic systems and a distributor of additional hydraulic machines, parts, and accessories. Kinnear Specialties has a broad line of products including hydraulic and pneumatic cylinders, pumps, hydraulic accessories, and accumulators. Complete custom filtering and hydraulic systems are available. Kinnear Specialties, Inc. also provides, design, installation, and repair services for hydraulic parts and systems.
-
-
-
-
-
Kinequip, Inc.
Hydraulic Hose
Company Overview
Kinequip, Inc. was founded in 1946 in Buffalo, NY as a distributor of industrial parts, accessories, and kits. Today these offerings have grown to include motors, compressors, blower systems, clams, pumps, various fittings, gauges, and sensors, as well as pneumatic and high-pressure devices. Kinequip also serves as a distributor for individual device and parts manufacturers. Kinequip additionally offers custom-designed solutions ranging from R&D to unique components and special-made parts, as well as value added designs on demand.
-
-
-
-
-
Kent Rubber Supply
Hydraulic Hose
Company Overview
Kent Rubber Supply was founded in 1946 and is located in Grand Rapids, Michigan. The company operates as a supplier and distributor of industrial rubber products such as hoses, conveyor belts, gaskets, and sealing solutions. Their products are commonly used in various industries including automotive, manufacturing, food processing, and agriculture, for sealing, vibration control, shock absorption, and insulation. Kent Rubber Supply also provides custom fabrication and assembly services and on-site hose testing and certification.
-
-
-
-
-
Holyoke Fittings, Inc.
Hydraulic Hose
Company Overview
Holyoke Fittings, Inc. has a 100-year history dating back to its founding in Massachusetts and is now based in Brooklyn, New York. Holyoke Fittings is a distributor of fittings to the plumbing, heating, air-conditioning, gas, and refrigeration industries. Holyoke maximizes domestically manufactured products. Holyoke Fitting’s product line includes various types of fittings, valves, hoses, and tubing. Holyoke Fittings also offers specialty items commonly used in the plumbing, airline, and lubrication sectors.
-
-
-
-
-
Fluid Energy Controls, Inc.
Hydraulic Hose
Company Overview
Fluid Energy Controls was founded in 1995 and is headquartered near Los Angeles in Brea, California. The company is a fluid power distributor of pumps, motors, and other hydraulic components from manufacturers such as Parker, Bosch Rexroth, Rineer, Denison, and Ausco. The company offers two primary product lines in accumulators and fluid power products. Accumulators include bladder accumulators, lube oil accumulators, pulsation control, surge suppressors, and accessories such as brackets and gauging. Fluid power products includes pumps and systems, process filtration, valves, and accessory products.
-
-
-
-
-
American Metal & Rubber, Inc.
Hydraulic Hose
Company Overview
Located in Philadelphia, American Metal (AMR) is a manufacturer of hose and camlock fittings. They were founded in 1904 and serve the agricultural, oil and gas, chemical, and municipal industries. They provide a diverse selection of rubber which includes Neoprene, Silicone and natural rubber, among others. Metal products comprise a wide assortment of metal hoses and metal hose assemblies, which are military-grade and can be used for many different purposes. .AMR is not only a supplier of various parts, but also makes custom assemblies for their customers
-
-
-
-
-
AC Hydraulics, Inc.
Hydraulic Hose
Company Overview
AC Hydraulics, Inc. is based in Daytona, Florida, and is a distributor and full-service repair company for fluid power components. The company is a distributor for manufacturers such as Lubeq, Norco Jacks, Chelsea PTO, and Donovan Tarp Systems. The company offers repair services on equipment from brands such as Caterpillar, John Deere, Komatsu, and Takeuchi. The company repairs trucks, cylinders, pumps, valves, and other equipment. The company also offers custom fabrication of tanks, cylinder components, and other equipment in its machine shop.
-
-
-
-
-
-
-
-
-
M & M Hydraulic Co.
Hydraulic Hose
Company Overview
M & M Hydraulic Co., founded in St Paul, MN is a provider of hydraulic repair services. The company's product portfolio includes repair services for hydraulic and pneumatic cylinders, hydraulic and pneumatic valves, hydraulic and pneumatic pumps, and other industrial components. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. They have repair shops in Wisconsin, North Dakota, South Dakota, and Iowa.
-
-
-
-
-
Sapphire Hydraulics
HYDRAULIC HOSES
Distributor Overview
Sapphire Hydraulics is based in Houston, U.S.A., and is a supplier of hydraulic products and heavy equipment repair services for a wide range of machinery in various industries. The company provides hydraulic hoses, fittings, hose guards, and, custom hydraulic equipment as well as offers repair services for anything hydraulic related – hoses, cylinders, pumps, motors, and, valves. The company also offers repair services for heavy-duty equipment and vehicles such as trenchers, excavators, cultivators, boom lifters, and, excavators, which are vital in the construction, farming, forestry, material handling, and, transportation, industries.
-
-
-
-
-
PIRTEK USA
Hydraulic Hoses
Distributor Overview
PIRTEK USA, established in 1996 and based in Rockledge, Florida, USA, is a manufacturer and supplier of hydraulic and industrial hoses. The company's product range includes hydraulic hoses, industrial hoses, the PIRTEK Endurance Series Hose, adapters, and accessory products. These products are designed for various hose replacement tasks. They serve industries such as construction, recycling, garbage & waste disposal, and manufacturing. The company's services include on-site hose service, counter service, OEM services, and specialty services.
-
-
-
-
-
Westerfield Sales and Service
Hydraulic Hose
Distributor Overview
Westerfield Sales and Services (Westerfield) was founded in 1946 in Old Brooklyn, Ohio. Westerfield is stocking caster distributer. Westerfield’s online store offers casters of a number of materials and styles including iron, hard rubber, phelonic, pneumatic, carefree, rubber, polyurethane, TPR, ductile steel, and poly on poly Westerfield also stocks other equipment such as E-tracks, straps, dollies, rubber bands, E-track load bars, furniture dolly carpet ends, hoop kits, tie offs, load bars, panel carts, platform trucks, pry bars, and shelf carts.
-
-
-
-
-
W.P. Law Inc.
Hydraulic Hose
Distributor Overview
W.P. Law Inc., established in 1970, and headquartered in Lexington, South Carolina, USA, is a supplier that specializes in providing irrigation, plumbing, and pump solutions. Their product range includes pumps, valves, controllers, filters, and irrigation systems in which these products cater to industries such as agriculture, landscaping, golf courses, and municipal water management. W.P. Law's offerings enable efficient water distribution, irrigation, and fluid control, ensuring optimal growth and sustainability. The company adheres to quality, ensuring durable solutions for their customers' water management needs.
-
-
-
-
-
Superior Industrial Supply
Hydraulic Hose
Distributor Overview
Superior Industrial Supply was founded in 1969 and is headquartered in Saint Louis, Missouri. Superior Industrial Supply is an independent distributor of industrial supplies. Superior Industrial Supply has an inventory of over 20,000 products as well as hundreds of thousands of non-inventory products usually available within 24 hours. Superior Industrial Supply products include fasteners, hose, fittings, electrical supplies, abrasives, brushes, other tools, assorted paints, assorted chemicals, shop supplies, and services. Servies include hydraulic hose assemblies as well as vendor managed inventory services.
-
-
-
-
-
Sully & Son
Hydraulic Hose
Distributor Overview
Sully & Son Hydraulics, Inc. (S&SH) is an American supplier and service provider specializing in hydraulic systems that was established in 1977 in Bakersfield, California. The company offers a broad range of hydraulic system parts and accessories, including motors, pumps, cylinders, and filters. They also offer related components for completing standard assemblies such as hydrostatic pumps and oil coolers. S&SH also provides various services for custom projects including consultation and shop repairs, as well as on-site troubleshooting and maintenance. The company chiefly serves clients in oil drilling, construction, mining, and the agricultural sector.
-
-
-
-
-
-
-
Pooley, Inc.
Hydraulic Hose
Distributor Overview
Pooley Inc. was founded in 1932 by Samuel H. Pooley as a custom fabrication conveyor belt shop in Western New York State. Pooley manufactures, distributes, and services industrial machines, supplies, and components. Pooley’s product offerings include power transmissions, industrial supplies, conveyor belting & accessories, and other industrial supplies. In addition, Pooley offers services including conveyor belting, and hose assemblies among others. Additionally, Pooley can perform liaison purchasing on behalf of customers for products not usually held in stock.
-
-
-
-
-
Oil-Air Products, LLC.
Hydraulic Hose
Distributor Overview
Oil-Air Products began in 1983 and is based in Plymouth, Minnesota. OAP is a distributor of fluid power systems and offers other services. Product listings include measurement instrumentation, pneumatics, custom manifolds, power units, lubrication, pumps, motors, valves, planetary gearboxes, accumulators, flow meters, and pumps. Other services include custom system design, hose assembly fabrication, troubleshooting, and component selection, as well as machine and part inspection and either on-site or inhouse repair options.
-
-
-
-
-
MSP Seals, Inc.
Hydraulic Hose
Distributor Overview
MSP Seals Inc. was founded in 1998 and is headquartered in Indianapolis, Indiana. The ISO 9001:2015 and ISO 14001:2015 certified company is a supplier that serves industries including automotive, aerospace, agricultural, pharmaceutical, and food & beverage industries with seals such as O-rings and X-rings used in both OEM and MRO applications. The company’s other sea products include rotary & shaft seals, hydraulic & pneumatic seals, and seal kits. The company designs custom hoses & fittings and engineered & molded seals using materials including PURE PTFE or PTFE loaded with carbon, bronze, or other fillers.
-
-
-
-
-
Monroe Aerospace (ECAS)
Hydraulic Hose
Distributor Overview
Monroe Aerospace (ECAS) is headquartered in Melbourne, Florida with a history dating back to the 1920s. Monroe Aerospace is an ISO 9001:2015 and AS9100D certified industrial manufacturing company. Monroe Aerospace serves many vertical markets including aerospace/defense automotive, medical, and transportation. Monroe Aerospace’s product offerings include bolts, screws, cherry rivets, clamps, clevis pins, clients, DZUS products, electrical components, collars, hinges, Huck bolts, Jo bolts, lock washers, nut plates, rivets, quarter turn fasteners, sheet metal screws, and washers.
-
-
-
-
-
M. Brown Fitting Specialists, Inc.
Hydraulic Hose
Distributor Overview
M. Brown Fitting Specialists Inc. was founded in 1930 and headquartered in Bogota, New Jersey. The ISO 9001-compliant company is a distributor of grease fitting and lubrication supply products from brands such as Alemite, Lincoln, Duralube, Balcrank, and Kingfisher. The company’s product listings include grease fittings other lubrication equipment, and other products. Grease fittings categories include brass, metric, leakproof, NAS grease fittings, and special thread designs. Other lubrication equipment includes adapters, bushings lock nuts, and pipes.
-
-
-
-
-
Liquidyne Process Technologies, Inc.
Hydraulic Hose
Distributor Overview
Founded in 1993, Liquidyne Process Technologies serves the dairy, brewery, distillery, biotech, pharmaceutical, & cannabis industries. Liquidyne offers a full line of sanitary and single-use products including process equipment components, sanitary equipment, single-use pumps and valves, single-use fittings and connectors, custom single-use assemblies, sanitary hose assemblies, sanitary valves, and single-use bioprocessing systems. Liquedyne produces all equipment in an ISO14644 Class 7-certified cleanroom has also attained 9001:2015, USP Class VI Testing, ASME Bioprocessing Equipment, and EHEDG certification status. Liquedyne also offers process optimization and on-site process audit & evaluation services.
-
-
-
-
-
HydraCheck
Hydraulic Hose
Distributor Overview
HydraCheck was established in 1990 and headquartered in West Valley City, Utah. The company is a distributor of diagnostic testing and maintenance for hydraulic systems across North America. The company provides support services for end customers as well as mechanics and technicians. The company’s product lines include testing products, diagnostic kits, and safety devices. Testing products include flanges, gauges, and thermometers while kits include identification kits and test kits. The company's safety devices include goggles, models, and guides.
-
-
-
-
-
Dunham Rubber & Belting Corporation
Hydraulic Hose
Distributor Overview
Dunham Rubber & Belting Corp. (DRB) has been in operation since 1965 and is based in Greenwood, Indiana. DRB offers a variety of products and services, including conveyor belts and accessories, hydraulic hose and fittings, industrial hose and fittings, sanitary hose and fittings, material handling and ducting, sheet rubber and gaskets, UHMW, polycarbonate, and acrylic sheets, as well as supplies for the egg processing, brewery, distillery, and winery industries. In January of 2023, DRB was acquired by Belt Power, an independent distributor and fabricator of conveyor system components.
-
-
-
-
-
Applied Power Solutions
Hydraulic Hose
Distributor Overview
Applied Power Solutions is located in Addison, Illinois and serves the metal processing, metal service center, paper mills & paper converting, canning, grinding mills, commercial laundry, marine drives oil & gas, power take off clutches, and material handling markets as a parts distributor and service provider. Some of Applied Power Solutions’s product offerings include clutches & brakes such as centrifugal clutches and water cooled brakes, hydraulics such as accumulators and manifold systems, pneumatics such as actuators and valves, and power transmission parts such as bearings and safety mats.
-
-
-
-
-
Accent Bearings Co., Inc.
Hydraulic Hose
Distributor Overview
Accent Bearings Co. Inc. was established in 1993 and is a distributor for industrial bearings. Accent Bearings offers a full range of bearing-related parts including ball, cylindrical, radial, thrust, and standard, as well as CAM followers, rod ends, belts, sheaves, busings, bronze busings, bar stock, pulleys, chains, sprockets, gears, speed reducers, motors, clutches, brakes, couplings, shafts, shaft accessories, oil seals, gauges, retaining rings, air cylindeers, conveyor belts, and fluid power process control equipment.
-
-
-
-
-
STENFLEX
INDUSTRIAL HOSES
Manufacturer Overview
STENFLEX was established in 1965 and is based in Norderstedt, Germany, as a manufacturer of flexible pipe connections made of rubber, stainless steel, and PTFE. The product portfolio of the company consists of STENFLEX rubber compensators, STENFLEX steel compensators, STENFLEX PTFE compensators, and STENFLEX industrial hoses. The products are used to absorb movements, dampen vibrations, and reduce noise. Applied to machines, aggregates, and pipeline construction as flexible pipe connections, ensuring secure connections, the products serve various industries, including process technology, offshore technology, mechanical engineering, construction, and manufacturing.
-
-
-
-
-
Bell S.r.l.
Hydraulic flexible hoses
Manufacturer Overview
Bell S.r.l. is a manufacturer of hydraulic pumps, air-hydraulic boosters and electric power units that was established in Lombardy, Italy, in 1985. The company primarily produces air-hydraulic boosters for high-pressure or flow rate applications, and hydraulic pumps for manual, pneumatic, or electric applications up to 1,000 bar. It also offers filtering systems, electro-integrated cylinders for linear motion control, and custom engineering services. The company’s products are used mainly by clients in the marine and offshore industries, with additional applications in mining and industrial processing.
-
-
-
-
-
FPT Fluid Power Technology S.r.l.
High pressure hydraulic hoses
Manufacturer Overview
FPT Fluid Power Technology S.r.l., established in 1966 and headquartered in Genoa, Italy, is a manufacturer of high-pressure hydraulic equipment from 700 to 4,000 bar. The company's products include lifting, bolting, and tensioning systems. It also offers both standard and custom-made products according to customer specifications. It has the latest generation of CNC machines for turning and milling to manufacture all components that are assembled and tested. The company has a quality management system certificate ISO 9001:2008. It serves various industries such as construction, mining, oil and gas, shipbuilding, and more.
-
-
-
-
-
QINGDAO HYRUBBERS CO., LTD
HYDRAULIC HOSE
Manufacturer Overview
Qingdao Hyrubbers Co. Ltd., established in 2009 and headquartered in Qingdao, China, is a hydraulic hoses and accessories manufacturer and exporter. The company's products include welding hoses, PVC fiber hoses, and conveyor belts. It also offers rubber sheets, rubber tiles, and fire sleeves. These products are used for applications that include the flow of petrol and diesel fuel, water, and oil, and are also used for air compressors, sandblasting, and gas stations. The company exports 70% of its products to the Americas, Europe, and Asia and offers original equipment manufacturer services for established brands.
-
-
-
-
-
STENFLEX RUDOLF STENDER GMBH
INDUSTRIAL HOSES
Manufacturer Overview
Stenflex Rudolf Stender GmbH, founded in 2012 and headquartered in Norderstedt, Germany, is a flexible pipe connection developer, manufacturer, and supplier to customers worldwide. The company's products include rubber expansion joints, steel expansion joints, and PTFE expansion joints. It also supplies industrial hoses, swivel joints, and pipe connectors. These products are used for virtually all application fields, including industrial applications, and are found in heating, ventilation, and air conditioning equipment. The company also supplies products to the new energy, shipbuilding, and marine propulsion industries.
-
-
-
-
-
Guangzhou Yuben Hydraulic Technology Co., Ltd.
RUBBER HOSE
Manufacturer Overview
Guangzhou Yuben Hydraulic Technology Co., Ltd., founded in 2012 and based in Guangzhou, China, is a manufacturer of hydraulic hose assembly equipment. The company produces more than 30 types of hydraulic hoses and processing equipment. It uses production equipment such as MAZAK lathe and gantry machining centers, as well as a HEXAGON three-coordinate measuring machine used as a testing equipment. All of its products have passed SGS inspection and CE certification.
-
-
-
-
-
Taon Hydraulic
Fittings / Hoses
Manufacturer Overview
Taon Hydraulic, founded in 2011 and based in Syddanmark, Denmark, is a manufacturer of hydraulic components. The company produces hydraulic valves and pumps, hydraulic motors, oil filters, valves, accumulators, and hydraulic tanks to customers worldwide. All the products are supplied to different industries, including transportation and marine. The company also manufactures hydraulic orbit motors and pumps of different versions, such as gear pumps, variable piston pumps, handpumps, and vane pumps are produced. Apart from this, the company produces hydraulic valves such as directional control valves, solenoid valves, in—line valves, and proportional valves with hydraulic hoses and accessories.
-
-
-
-
-
Semperit AG Holding
HYDRAULIC & PRESSURE WASHER HOSES
Manufacturer Overview
Semperit AG Holding, established in 1824 and headquartered in Vienna, Austria, is a manufacturer and supplier specializing in conveyor belts. The company's products include hydraulic pressure washer hoses, steel cord belts, and textile belts. These products are used in various industries, including agriculture, steel production, and renewable energy generation. The company provides customized solutions, installation, and maintenance of its products at client sites. It is EN ISO 15236, EN ISO 14890, and ISO 284 certified, and it exports to the United States, Poland, and Canada.
-
-
-
-
-
RedFluid
CUSTOM MADE HOSES AND FLEXIBLE TUBES
Manufacturer Overview
RedFluid, established in 1985 and headquartered in Barcelona, Spain, is a manufacturer that specializes in manufacturing and stocks valves and fittings. The company specializes in needle, check, ball valves, customizing dimensions, connections, and more. It also offers needle-regulating valves suitable for instrumentation circuits. Its needle valves are resistant to both hot and cold temperatures. Furthermore, the company is ISO 9001:2015 certified. It serves various industries, including medical, aerospace, and alternative fuels.
-
-
-
-
-
Hydrosila
High pressure hoses
Manufacturer Overview
Hydrosila was founded in 2001 and is a manufacturer of fluid power machines and hydraulic system components based in Kropyvnytskyi, Kirovograd, Ukraine. The company produces various products such as high pressure hoses, directional control valves, and quick release couplings. These products are used in various applications such as telescopic wheel loader, concrete mixers trucks, and road rollers. The company has participated in various exhibitions such as AGRITECHNICA 2023, Bauma 2022 Munich, and Agro Show 2021 Poland.
-
-
-
-
-
ERRE.DI. SRL
HYDRAULIC PIPE
Manufacturer Overview
ERRE.DI. SRL, founded in 1961, established in 1975, and headquartered in Cinisello Balsamo, Italy, is a fittings and couplings manufacturer for industrial pipe systems. The company's products include VR cam locks and tanker connections. It also offers flexible connections made of steel, composites, and rubber used for the transfer of liquid and gas chemicals, air, and water. The company has also expanded its production to include an automated division for the custom supply of machine construction, tool technologies, and industrial processes, and positions itself as a partner for engineering companies, industrial installers, and final contractors.
-
-
-
-
-
Hebei Qianli Rubber Products Co., Ltd
Hydraulic Hose
Manufacturer Overview
Hebei Qianli Rubber Products Co., Ltd, founded in 1993 and headquartered in Jingxian County, China, is a manufacturer and supplier of hose products. The company manufactures and exports high pressure, medium pressure and low pressure hydraulic hoses in customizable sizes and specifications. This product range includes rubber or thermoplastic inner tube type, spiral or braid reinforcement type and steel or fiber reinforcement type of hoses. It also provides rubber hose fittings and associated accessories along with it. The company has obtained ISO 9001 certification, and its products comply with the American SAE, German DIN and Russian GOST standard.
-
-
-
-
-
Polyhose India Pvt Ltd
Hydraulic Hose
Manufacturer Overview
POLYHOSE India Pvt., Ltd., is a manufacturer of fluid conveyance products, founded in 1996 and headquartered in Chennai, Tamil Nadu, India. The company is a global diversified industrial conglomerate specializing in design, development, and distribution of energy conveyance products. With modern manufacturing and state-of-the-art facilities, it offers a wide range of products to multiple industries, including hydraulic, industrial, composite, stainless steel flexible hoses and fluid connectors. It has established global footprints with presence in North and South America, Europe, Middle East, Southeast Asia, South Africa and Australia. Today it engages more than 3500 employees in its worldwide operations.
-
-
-
-
-
ContiTech Deutschland GmbH
Hydraulic Hose
Manufacturer Overview
ContiTech, established in 1871 with operations in more than 40 countries, is a manufacturer of rubber and plastic products serving the machine and plant engineering, mining, agriculture, and automotive markets. The company has numerous products, including air spring systems, anti-vibration systems, coated fabrics, compensators and connecting pipes, and conveyor belt systems. ContiTech, with over a century of experience, provides custom aggregate solutions to clients, including asset inventory management, assembly and installation tools, conveyor belt system consulting, and custom production.
-
-
-
-
-
Luohe Letone Hydraulic Technology Co., Ltd.
Hydraulic Hose
Manufacturer Overview
Luohe Letone Hydraulic Technology Co., Ltd., established in 2003 and based in Henan Pro,China, is a manufacturer of rubber compounds, rubber hoses & fluid connectors. The company offers a range of hydraulic hoses varying in high, medium and low pressure, industrial hoses of up to 12" that are high/low temperature and corrosion resistant, petroleum drilling hoses and ultra high pressure cleaning hoses for maintenance of vehicles, machinery and building exterior walls. It also offers rubber compounds in varying grades and rubber sealing products. The company has obtained various safety certificates including MSHA, API and ABS type approval and GOST certificate.
-
-
-
-
-
Qingdao VIH hose Co., Ltd.
Hydraulic Hose
Manufacturer Overview
Qingdao VIH hose Co., Ltd., established in 2013 and based in Shandong,China, is a manufacturer of hydraulic hose complying to DIN, SAE, GB and Japanese standards. The company's main products are various smooth cover and wrapped cover steel wire braided hydraulic hoses. It also offers various industrial, petroleum drilling, high pressure washer and concrete pump hoses as well as hose fittings and couplings. The company has a rubber hose R & D center and test center consisting of impulse test, burst pressure test, Gotech rubber tensile test and ozone aging test machine to test raw material, semi-finished and finished products.
-
-
-
-
-
Umeta of America, Inc.
Hydraulic Hose
Manufacturer Overview
UMETA GmbH was founded in 1926 and is headquartered in Bielefeld, Germany with offices located globally. The company is a manufacturer of lubrication equipment, primarily for the automotive industry. The company’s primary product lines include grease nipples, grease guns, turned parts, and large equipment. The company provides custom-fit individualized turned parts using modern CNC machines for bigger lots. The company’s services include pre-sale and post-sale assistance in product selection and efficient product usage.
-
-
-
-
-
Nord-Lock Group
Hydraulic Hose
Manufacturer Overview
Nord-Lock Group, established in 1982 and headquartered in Sandviken, Sweden, is a manufacturer and supplier of wedge-locking technology for bolted joints. The company offers a comprehensive range of products, including Nord-Lock washers to secure bolted joints against loosening in extreme conditions, Boltight washers for high-pressure applications, Expander washers to prevent bolt hole stripping, Torque limiters to prevent over-tightening, and Thread repair inserts for fixing of damaged or worn threads. They cater to diverse industries seeking durable and dependable joint fastening solutions.
-
-
-
-
-
Connectors Verbindungstechnik AG
Hoses
Manufacturer Overview
Connectors Verbindungstechnik AG is based in Wallisellen, Switzerland, and is a manufacturer of hose connectors, aseptic valves, and sterile couplings established in 1985. The company’s product lineup includes its Sterilock branded sterile coupling system for contamination-free connection and disconnection of fluid lines, its Connlock branded reusable hose connection system that doesn’t require tools, and its Sterivalve branded aseptic valve system for safe and stable control of fluid flows. The company is ISO 9001:2015-certified and primarily serves the pharmaceutical and biotech industries.
-
-
-
-
-
DESMI A/S
Zipper umbilical hose
Manufacturer Overview
DESMI A/S, established in 1834 and headquartered in Norresundby, Denmark, is a manufacturer specializing in pumps and pumping solutions. The company offers diverse products, including ballast water management systems, helicopter refueling systems, firefighting systems, shock-rated pumps, sprinkler systems, and more. These products are applicable for a range of sectors, including marine and offshore, industry, oil spills, combating defense & fuel, and utility. The company's products follow industry standards with certifications from bodies such as ABS, DNV-GL, RMRS, CCS, and BV.
-
-
-
-
-
Fluimac
ACCESSORIES
Manufacturer Overview
Fluimac S.r.l., started in 2012 and based in Tradate, Italy, is an ISO 9001-certified manufacturer of industry pumps, including pulsation dampeners, magnetic-driven centrifugal, and horizontal centrifugal pumps. The company also sells accessories that complete the functionality of the pumps, such as fittings, basket strainer filters, and switch valves. It sells products under different brands like Neptune, Taurus, and Mixer. The Mini Compass range of pumps comprises five models and is a single-stage magnetic drive pump that delivers flows from 11 l/min to 50 l/min and operates at temperature ranges of -5°C to +90°C.
-
-
-
-
-
ALFAGOMMA America Inc.
HOSE
Manufacturer Overview
ALFAGOMMA America Inc. founded in Monza, Italy, in 1956 is a manufacturer and distributor of hydraulic products and industrial hoses. The company’s product portfolio includes hoses, fittings, adapters, swivel connectors, and Valves. Its products are used in hydraulic systems, pneumatic systems, conveying systems, and firefighting systems. The company serves the construction, energy, marine, and mining industries. The company has ISO 9001 certification and the ASME's Boiler and Pressure Vessel Code stamp award.
-
-
-
-
-
Kramp Groep
Hoses & swage inserts
Manufacturer Overview
Kramp Groep, established in 1951 and located in Gelderland, Netherlands, is a manufacturer that specializes in spare parts and accessories for the agricultural industry. The company offers a range of products, including spare parts for agriculture, forest and grass care, earthmoving, and road construction. It also offers batteries and accessories. Its product increases nerve-muscle communication, lifts energy levels, and reloads with electrolytes as well as up to 84 trace minerals. It serves a diverse range of industries, including agriculture, landscaping, forestry, civil engineering, and mechanical engineering.
-
-
-
-
-
ZEC S.p.A.
AGRICULTURAL MACHINERY
Manufacturer Overview
ZEC S.p.A., founded in 1961 and headquartered in Colorno, Emilia-Romagna, Italy, is a thermoplastic tubes and hoses for low, medium, and high pressure applications manufacturer and distributor. The company's products are manufactured to meet the specific requirements of applications that include cranes, bicycle hydraulic brakes, and wind turbines. It also supplies a range of fittings and accessories that include hydraulic-type swage fittings and micro-hose test couplings. The company offers full original equipment manufacturing and private label manufacturing services.
-
-
-
-
-
Manuli Hydraulics (Americas), Inc.
HIGH PRESSURE HYDRAULIC CONNECTORS
Manufacturer Overview
Manuli Hydraulics (Americas), Inc. established in 1935 in Warrendale, Pennsylvania, USA, is a manufacturer and supplier of fluid conveyance solutions. The company's product range includes hydraulic hoses, conveyors, refri-and-cooling systems, and specialized assembly equipment. These products are used in sectors such as drilling, mining, emergency hydraulics, and refrigeration. Serving the industrial machinery manufacturing sector, it emphasizes creativity and quality. Its services include assembly machines, smart fittings, quick couplings, and different hoses tailored for specific industrial needs.
-
-
-
-
-
Delphi
Brake Hoses
Manufacturer Overview
Delphi Autoparts, established in 1998 and headquartered in Michigan, US, is a manufacturer that offers aftermarket solutions to fuel economy. The company offers a wide range of products, including gasoline fuel systems, diesel fuel systems, maintenance solutions, engine management, and vehicle electronics. It also provides comprehensive diagnostics, test equipment, and robust training to help repair vehicles. Its product delivers fewer hydrocarbons, particulate emissions, and increased fuel savings. Frost & Sullivan recognized the company with the 2017 North American Company of the Year Award. It serves industries such as passenger vehicles, marine vehicles, agricultural vehicles, and more.
-
-
-
-
-
UIP International
Hydraulic Hose
Manufacturer Overview
UIP International was founded in 1992 and operates out of Houston, Texas. The company is an ISO 9001:2015 certified manufacturer of custom-built hose and rubber-based materials for industries such as petroleum, chemical, water treatment, aerospace, and material handling. The company has 10 primary product lines including sheet rubber, gaskets, marine hose, expansion joints, and metal hose & pump connectors. Additionally, custom-cut rubber, rubber stripping, gaskets, and seals are also available for order.
-
-
-
-
-
Mako Products LLC
Hydraulic Hose
Manufacturer Overview
Mako Products LLC manufactures and supplies quality fluid system components, including Superlok compression tube fittings, a patented product popular for its perfect fitting. The company's other products include threaded needle valves, ball valves, JIC fittings & adapters, stainless steel tubing, and related products. The company was founded in 2012 and is based in Oklahoma, USA. Their products are designed for various industries, including petrochemical, shipbuilding and maritime, semiconductors, aerospace, and biopharmaceuticals.
-
-
-
-
-
Hydrasearch Defense
Hydraulic Hose
Manufacturer Overview
Hydrasearch was founded in in 1962 in Annapolis, and now serves out of Stevensville, Maryland. Hydrasearch is a U.S. based manufacturer of specialized maritime and aerospace components for commercial, defense, and recreational purposes. Hydrasearch’s defense product categories include aerospace hose & fittings, marine hose & fittings, technical products such as valves & fittings, and underway replenishment products. Hydrasearch’s commercial and recreational products include aerators, air pipe heads, de-icers, deck drains, deck hardware, fountains, exhaust fittings, hose & clamps, nozzles, and miscellaneous hardware.
-
-
-
-
-
Adhezion Inc.
Hydraulic Hose
Manufacturer Overview
APPLIED Adhesives, formerly known as Adhesion, Inc. is a manufacturer of adhesives and equipment for numerous industries including automotive, electronics, filtrations, renewable, packaging, construction, bottle labeling, furniture, and transportation. APPLIED Adhesives has ISO/IEC 17025 and ISO 9001 certifications at its Rockford, Michigan facilities. APPLIED Adhesives provides adhesives for foam and mattresses, cabinetry, countertops, wood products, sportswear, workwear, and other individual uses. APPLIED Adhesives also provides sales, installation, automation, refurbishing, spare parts, and repair services.
-
-
-
-
-
Relong Technology Co., Ltd.
Dredge Rubber Hose
Company Overview
Relong Technology Co., Ltd. established in 1994 and based in Qingdao, Shandong Province, China, is a manufacturer and supplier of water transportation equipment. The company's product range includes dredger, marine winch, deck crane, gearbox, and dredging pipe. These products are designed for tasks like water transportation and marine ecological testing. They primarily serve industries such as Machinery Manufacturing, Marine Operations, Industrial Automation, and Environmental Testing. The company's services include professional design, international standard welding, on-field services, and after-sales support.
-
-
-
-
-
CEJN Industrial Corporation
Ultra high-pressure hydraulic hoses
Company Overview
CEJN, founded in 1995 and based in Skovde, Sweden, is a manufacturer of quick connect products and solutions for different industries such as construction machines, data centers and aviation among others. Their products include quick connect coupling solutions, hose and cable reels, hoses and hose kits. The CEJN Group employs 550 people worldwide and operates 17 sales offices, 5 production facilities, and one international head office. Additionally, independent distributors sell and promote CEJN products.
-
-
-
-
-
Hi-Force
Hydraulic Hoses
Company Overview
Hi-Force, established in 1982 and based in the United Kingdom, is a manufacturer and supplier of hydraulic tools. The company produces other products such as hydraulic cylinders, tough lift jacking systems, bolt tensioners, hydro test pumps, and crimpers and cutters. Apart from this, the company also manufactures 2000 products and supplies to different industries. Apart from this, the company also caters to services such as short- and long-term rental tools, tool repairs, maintenance, and training services with ECITB-approved mechanical joint integrity certification.
-
-
-
-
-
Römheld GmbH Friedrichshütte
Hydraulic high-pressure hoses
Company Overview
Römheld GmbH Friedrichshütte is based in Hessen, Germany, and is a manufacturer and supplier of clamping and handling technology products that was originally founded in 1870 before becoming part of the ROEMHELD Group of companies in 1990. The company offers magnetic clamping systems for clamping molds on presses or punches, hydraulic clamping components for clamping workpieces on machine tools, and related workpiece handling equipment such as rotary consoles. The company chiefly serves Germany’s metalworking and plastics industries, to whom it also provides technical support and onsite services.
-
-
-
-
-
The Yokohama Rubber Co., Ltd.
Hydraulic Hose
Company Overview
YOKOHAMA, established in Japan in 1917 is a manufacturer engaged in tires for light truck, passenger car, commercial truck and bus, and off-the-road mining and construction applications. The company has operations in the US market, and they have distributors all around the world. Their product range includes passenger tires, marine hoses, conveyor belts, aerospace products and all kinds of wheels. The company uses carbon-neutral, resource-recycling, and sustainable procurement of natural rubber while balancing economic activities and working in harmony with local communities and nature.
-
-
-
-
-
Ningbo Dino-Power Machinery Co., Ltd.
Hydraulic Hose
Company Overview
Ningbo Dino-Power Machinery Co. LTD (Dino-Power) is based in China with representative distributors available internationally. Dino-Power is both in-house and OEM producer for airless paint sprayer products. Dino-Power’s product line includes airless paint sprayers, other spraying equipment, and spare parts and accessories. Airless paint sprayers include piston and diaphragm pump designs, gas powered, airmix, and pneumatic sprayers, airless line marking machines and two component paint spray machines. Other equipment includes texture sprayers, stucco sprayers, hopper sprayers, and more.
-
-
-
-
-
Thejo Engineering Limited
ANAKONDA RUBBER HOSE & FITTINGS
Company Overview
Thejo Engineering Limited, founded in 1974 and headquartered in Chennai, Tamil Nadu, India, is a manufacturer and service supplier in the fields of bulk material handling, mineral processing, and corrosion protection. The company offers various services, including conveyor belt services, transfer point services, and abrasion and wear services, aimed at optimizing the life cycle of wear parts. Its product range includes the TEZ mechanical splice system for conveyor belts, synthetic adhesives, as well as earthmoving equipment designed for construction and excavation purposes.
-
-
-
-
Company Overview
Tricoflex, established in 1957 and headquartered in Vitry-le-François, Champagne-Ardenne, France, is a flexible hose designer, manufacturer, and supplier. The company offers more than 60 different types of hose and 1,000 products. Its knitted, braided, and spiral flexible hose products include multipurpose reinforced, food-quality hose, antistatic hose specially designed for compressed air supplies, and industrial application heavy-duty hose with a rigid shock-proof wall. Customers can use the company's online quote system to configure and customized hose production requests.
-
-
-
-
Gebr. Held Hydraulik
HOSE LINES
Company Overview
Gebr. Held Hydraulik was established in 1970 and is a manufacturer, distributor, and seller of hydraulics products absed in Tuttlingen, Baden-Wurttemberg, Germany. The company offers various products in the portofolio such as hydraulic hose fittings, aluminium control blocks, and loctite sealant. The products are used in various applications such as water management, chemical manufacture, and food and beverage industries. The company is certified with ISO 9001 standards certification for the management system of the production and sales.
-
-
-
-
-
APSOparts
Hydraulic hose
Company Overview
APSOparts, launched in 2008 in Zurich, Switzerland, is a manufacturer and supplier of complex engineering solutions for small to large businesses in Europe. The company offers solutions for sealing, engineering plastics, fluid handling, anti-vibration, and drive technology. It makes products, such as adhesive tapes, corrugated hoses, timing pulleys, round bars, and threading sealings. Its services include supply chain and logistics, product finders, DirectUP order upload, DirectUP product configurator, and 3D CAD files.
-
-
-
-
-
Spartan Industrial & Marine
Hydraulic Hose
Company Overview
Spartan Industrial Products, a company founded in 2006 and headquartered in Houma, Louisiana, United States is a manufacturer and supplier of industrial and marine products. The company specializes in industrial and hydraulic hoses and accessories, offering a range of other industrial and marine supplies, including packing, gaskets, valves, and fittings. Its customer service ensures delivery and technical support, catering to the needs of businesses across various sectors. The company's extensive product catalog and customer care make them a go-to choice in the industrial market.
-
-
-
-
-
PARKER HANNIFIN CORP
Hydraulic Hose
Company Overview
Parker Hannifin Corporation was founded in 1917 and is headquartered in Cleveland, Ohio. Parker Hannifin is a manufacturer and distributor of motion and control technologies and systems for markets including mobile, industrial, and aerospace. Parker-Hannifin operates through two segments: diversified industrial and aerospace systems. Diversified industrial offers sealing, shielding, thermal products and systems, adhesives, diagnostics solutions, and hydraulic, pneumatic, and elctromechanical components and systems or industrial machinery and equipment. The aerospace segment offers control actuation systems and components, engine exhaust nozzles and assemblies, pilot controls, as well as others.
-
-
-
-
-
River Bend Hose Specialty Inc.
Hydraulic Hose
Company Overview
River Bend Hose Specialty, founded in 1981 and based in South Bend, Indiana, is an American manufacturer and distributor specializing in industrial and hydraulic hose assemblies and power transmission components. As an authorized distributor for Parker's Fluid System Connectors Division of Parker Hannifin Corporation, the company specializes in providing fittings and valves for pneumatic automation applications. It also collaborates with other companies like Goodyear's industrial hose and hydraulics business unit and SPX FLOW. Its product range includes hydraulic components, electric motors, gear reducers, and more. Additionally, the company's hydraulic division, the acquired company Scotty's Hydraulics Service, offers expert hydraulic repair services.
-
-
-
-
-
Jason Industrial
Hydraulic Hose
Company Overview
Jason Industrial was founded in 1958 in Fairfield, New Jersey. Today, Jason Industrial is the hose division of AMMEGA and manufactures a range of both industrial and hydraulic hose, couplings, equipment, and accessories. Jason Industrial products are designed for the industries in which they serve including agriculture, chemical, HVAC, material handling, and mining. Jason Industrial's product lines include industrial hose products, hydraulic hose products, agricultural hoses, skateboard products, and belts. Jason Industrial also provides guides and resources for distributors and end users.
-
-
-
-
-
Fournier Rubber & Supply Co.
Hydraulic Hose
Company Overview
Fournier Rubber & Supply Company was founded in 1933 and headquartered in Milford, Ohio. The company is a distributor of industrial products from high-end manufacturers and serves numerous markets including agriculture, automotive, solar, plumbing, and medical equipment. The company’s product offerings include rubber products such as O-rings, gaskets, and tubing, as well as other products. The company offers design, development, and prototyping services for customers. In addition to in-house designs, the company offers brands such as Dixon Couplings, 3M, Kuriyama Hose, and Eaton Hose & Fittings.
-
-
-
-
-
California Industrial Rubber Co.
Hydraulic Hose
Company Overview
California Industrial Rubber Company was founded in 1958 and is based in Fresno, California with branches across the state as well as Nevada. The company is a distributor and manufacturer of industrial rubber and plastics to agricultural, industrial, commercial, and mining markets. The company’s products include agriculture harvester products, hoses & couplings, bearings & power transmissions, and other tools, parts, and accessories. The company’s services include custom manufacturing, repair, water jetting, and CNC machining via Sliger Machineworks.
-
-
-
-
-
All Jetting Technologies, Inc.
Hydraulic Hose
Company Overview
All Jetting Technologies Inc., in South Florida, is a family-owned company that provides affordable and quality products. The company manufactures rotating waterjet guidelines, water blast nozzles, and high-pressure and ultra-high-pressure water jetting hose fittings. It also specialize in UHP Hydro Blast surface preparations, fittings, adapters, and parts for industrial work environments in the hydro jetting industry. All Jetting Technologies, Inc. is also a distributor for Parker Hannifin's high-pressure hydroblaster , Blaster hoses, Ultra High Blaster Hoses, and Ultra High Pressure Hydroblasting Hoses
-
-
-
-
-
-
-
-
-
-
-
-
-
Smith Industrial
Hydraulic Hose
-
-
-
-
-
Tri-State Bearing Company, Inc.
Hydraulic Hose
Distributor Overview
Tri-State Bearing Company was founded in 1950 and is headquartered in Evansville, Indiana. The company is an independently owned and operated distributor of a full line of bearings, mechanical power transmission, and motion control products to customers across North America in the agricultural, automotive, manufacturing, and pharmaceutical industries. The company has several product lines such as chains & sprockets, clutches & breaks, and couplings in addition to its namesake of bearings. The company also offers services such as custom-length modifications of certain components such as roller chains, electronic repair of drivers and controllers, and on-site gearbox assembly.
-
-
-
-
-
SunSource
Hydraulic Hose
Distributor Overview
SunSource is headquartered in Las Vegas, Nevada. The company is a technically focused distributor providing design, technical understanding of the product, a streamlined supply chain, and a solutions-based approach to the needs of customer applications. The company serves the food and beverage, mobile machinery, oil and gas, and semiconductor industries. The company’s product lines include mobile hydraulics, industrial hydraulics, pneumatics, fluid process, and automation & motion control. To support these, the company offers design & application support, system assembly & fabrication, repair services, and mining supply services.
-
-
-
-
-
Koehler Rubber & Supply Co.
Hydraulic Hose
Distributor Overview
Koehler Rubber & Supply Co. (Koehler) was founded in 1917 and operates out of Independence, Ohio. Koehler is a distributor for specialty fluid application products. Product offerings include spray finishing equipment, fluid pumping and handling, lubrication, hoses, sealants, adhesives, meter mix, dispense systems, spray systems, hydraulic & pneumatic equipment such as adapters and fittings, and measuring devices such as gauges and thermometers. Koehler also offers value-added services such as system design, service & repair, maintenance training, operator training, and efficiency analysis.
-
-
-
-
-
Guenther Supply, Inc.
Hydraulic Hose
Distributor Overview
Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.
-
-
-
-
-
Green Rubber-Kennedy AG, LP
Hydraulic Hose
Distributor Overview
Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.
-
-
-
-
-
Goodyear Rubber Products, Inc.
Hydraulic Hose
Distributor Overview
Goodyear Rubber Products was established in 1948 in Brooklyn, New York, and is now based in Clearwater, Florida. The company is a privately owned master distributor and fabricator of industrial rubber products serving air, water, chemical transfer, food handling, and other applications. The company provides fabrication, testing, and certification of hose assemblies to NAHAD, RMA, and U.S. Coast Guard specifications. The company has 17 product categories including expansion joints, industrial hoses, power transmission, and PVF-pipe valves and fittings. Recently, the company developed its GOOD FLEX brand of rubber products.
-
-
-
-
-
Cadence Supply Company
Hydraulic Hose
Distributor Overview
Cadence Supply Company is headquartered in Homewood, Illinois, and is a U.S.-based industrial products distributor offering a wide array of industrial products for MRO and other production requirements ranging from standard off-the-shelf items to custom die-cut parts and materials to both individuals and Fortune 500 companies. The company’s product offerings include fasteners, roller chains, linear motion products, and products made from various materials. In addition to in-house-manufactured items, the company is a distributor for SMC, CS Hyde, New York Wire, and Spyraflo, among others.
-
-
-
-
-
BDI
Hydraulic Hose
Distributor Overview
BDI Exppress was established in 1935 and is headquartered in Cleveland, Ohio. BDI develops and deploys custom distribution and supply chain solutions for customers across Asia, Europe, and North America. BDI serves multiple industries including automotive, primary metal, food processing, public utilities, pulp and paper, mining, material handling, bearings, mechanical power transmission, electrical power transmission and motion control, linear motion, pneumatic and hydraulic fluid power, industrial, safety, and material handling.
-
-
Hydraulic Hose Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | HANSA-FLEX USA |
2.8%
|
| 2 | Danfoss Industrial Automation |
2.3%
|
| 3 | ContiTech Deutschland GmbH |
2.1%
|
| 4 | Kurt Manufacturing |
1.7%
|
| 5 | MicroStrain, a LORD Company |
1.7%
|
| 6 | Arcadian Services |
1.5%
|
| 7 | Southeastern Hose, Inc. |
1.5%
|
| 8 | Sapphire Hydraulics |
1.3%
|
| 9 | Unisource Manufacturing Inc. |
1.3%
|
| 10 | HYDAC Technology Corporation |
1.3%
|
Derivation Method
The ranking is calculated based on the click share within the hydraulic hose page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- The Yokohama Rubber Co., Ltd.: 28,468
- Delphi: 850
- QINGDAO HYRUBBERS CO., LTD: 242
Newly Established Company
- Guangzhou Yuben Hydraulic Technology Co., Ltd.: 2012 (12 years ago)
- XTRAFLEX BELGIUM: 2003 (21 years ago)
- QINGDAO HAINUO MACHINERY PRODUCTION CO.,LTD: 2003 (21 years ago)
Company with a History
- DESMI A/S: 1834 (190 years ago)
- ContiTech Deutschland GmbH: 1871 (153 years ago)
- Semperit AG Holding: 1900 (124 years ago)
Hydraulic Hose Manufacturers in United States
*Including some distributors, etc.
- HANSA-FLEX USA
- MicroStrain, a LORD Company
- Danfoss Industrial Automation
- Gates Corporation
- Kurt Manufacturing
- Unisource Manufacturing Inc.
- The Briggs Company
- Swagelok
- SparTek Industries
- Southern Rubber Co. Inc.
- Southeastern Hose, Inc.
- Schroeder Industries
- Piranha Hose Products, Inc.
- Mercer Gasket & Shim
- Kuriyama of America, Inc.
- Jergens, Inc.
- HYSECO, Inc.
- HYDAC Technology Corporation
- Hosecraft USA
- Hannay Reels Inc.
- Fluid Tech Hydraulics, Inc.
- Coronet Parts Mfg. Co., Inc.
- Clean Planet Manufacturing & Labs, Inc.
- Cenflex, Inc.
- Bay Rubber Company
- Atlantic Rubber Company, Inc
- Arcadian Services
- Allied-Locke Industries
- Aero Rubber Company, Inc
- HFI Fluid Power Products
- Titan Fittings
- U.S. Rubber Supply Co.
- Seal Fast, Inc.
- SC Fastening Systems
- ProPulse, a Schieffer Company
- Petersen Products Co.
- Ohio Power Tool
- Metro Hydraulic
- McGill Hose and Coupling, Inc.
- Kinnear Specialties
- Kinequip, Inc.
- Kent Rubber Supply
- Holyoke Fittings, Inc.
- Fluid Energy Controls, Inc.
- American Metal & Rubber, Inc.
- AC Hydraulics, Inc.
- The Hose Company
- DNP Americas
- M & M Hydraulic Co.
- Sapphire Hydraulics
- PIRTEK USA
- Westerfield Sales and Service
- W.P. Law Inc.
- Superior Industrial Supply
- Sully & Son
- Robeck Fluid Power Co.
- Pooley, Inc.
- Oil-Air Products, LLC.
- MSP Seals, Inc.
- Monroe Aerospace (ECAS)
- M. Brown Fitting Specialists, Inc.
- Liquidyne Process Technologies, Inc.
- HydraCheck
- Dunham Rubber & Belting Corporation
- Applied Power Solutions
- Accent Bearings Co., Inc.
Global Distribution of Hydraulic Hose Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
66 | 70.2% |
China
|
7 | 7.4% |
Germany
|
5 | 5.3% |
Italy
|
3 | 3.2% |
Sweden
|
2 | 2.1% |
United Kingdom
|
2 | 2.1% |
Taiwan
|
1 | 1.1% |
Denmark
|
1 | 1.1% |
Austria
|
1 | 1.1% |
Spain
|
1 | 1.1% |
Ukraine
|
1 | 1.1% |
India
|
1 | 1.1% |
Japan
|
1 | 1.1% |
Belgium
|
1 | 1.1% |
Malaysia
|
1 | 1.1% |
