6 Alligator Clip Manufacturers in 2023
This section provides an overview for alligator clips as well as their applications and principles. Also, please take a look at the list of 6 alligator clip manufacturers and their company rankings.
Table of Contents
What Is an Alligator Clip?
An alligator clip is a tool used to easily connect terminals and contacts by clamping them between the contacts in a similar mechanism to the snapping of an alligator's mouth.
They are often used for testing lines and temporary connections, mainly for weak electric circuits.
In addition to red clips for positive circuits and black clips for negative circuits, yellow insulator clips are also available for weak electric circuits. If the terminal only comes without lead wires, solder the lead wires to the terminal.
Uses of Alligator Clips
Test leads are generally used to pinch terminals and contacts for line testing and temporary connections in weak circuits. A similar shape is the alligator clips, but this one has larger contacts and can carry more current.
In weak electric current applications, red cables are usually used for the positive terminal and black cables for the negative terminal. Green, white, blue, and yellow cables are also available.
Conversion cables are also available that have alligator clips on one side and a banana plug on the other side, depending on the device to be connected.
Principle of Alligator Clips
The connection terminals open like the mouth of an alligator and pinch the terminals and contacts to connect circuits. If this connection terminal is exposed, there is a risk of short-circuiting, so it is called a worm clip because it is wrapped in an insulating material such as PVC.
It is mainly for weak electric current, so attention should be paid to the corresponding amperage when using it. Because it is shaped so that the terminals and contacts can be clamped and fixed, there is no need to hold the terminals in place during the test, making it suitable for long-term measurements.
Originally, the name was derived from the shape of the terminal part, and lead wires were soldered to the terminals by the user. However, conversion plugs with lead wires pre-installed or with different terminal shapes at both ends (e.g., alligator clips at one end and a banana plug at the other end) are now in circulation. In the case of this shape, for example, it can be used for operations such as sending an electrical signal (received from the device side with a banana plug) obtained by a pulse generator to living cells with a needle electrode sandwiched by a pinwheel clip.
In weak electric current, red is generally used for the positive side and black for the negative side of the cable.
Types of Wires With Alligator Clips
- Wire with alligator clips type on both sides
Often seen in development sites for connections during testing, etc. It is inexpensive and easy to make by yourself, but it has the feature of not being able to carry a large current. - USB terminal on one side
One side has a male or female USB terminal, and the other side has a red and black cable with alligator clips on the end. This type of terminal is designed to allow power to be taken from USB chargers used for smartphones, solar panels, storage batteries, mobile batteries, etc. that have USB output terminals. - BNC terminal on one side
A type of coaxial cable with alligator clips on one side instead of a thin wire is also available on the market. Equipped with BNC connectors for input and output, such as oscilloscopes and function generators. - Single-sided cigar socket
This type has a 12V cigarette lighter socket on one side. It is connected to a cigarette lighter socket to check the operation of 12V products. - Cables for low-frequency therapy devices and electro-acupuncture electrode low-frequency therapy devices
Unexpectedly, cables for low-frequency therapy devices and electro-acupuncture electrodes used in medical facilities such as acupuncture and moxibustion clinics also have a alligator clip at the end. It is used to conduct electricity from the therapeutic needle.
How to Make a Wire Using Alligator Clips
The procedure for making two-sided alligator clips wire by connecting the lead wires is as follows:
- Remove the vinyl from the clip you purchased.
- Strip the end of the lead wire and thread the end facing the hole in the back of the clip that was removed from the vinyl in step 1.
- Solder the tip of the lead wire to the alligator hole.
- Put the vinyl back on the clip.
Do the same process for both sides of the lead wire as described in steps 1 through 4 to complete the two-sided alligator clip wire.
List of 6 Alligator Clip Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- China
-
-
-
-
-
Chaudhry Traders
Alligator Clip
-
-
-
-
-
A. K Info
Alligator Clips Clamps
-
-
-
-
-
Hsuan Yen Electronics
Alligator Clip
-
-
-
-
-
Diana Electrical Industries
Alligator Crocodile Clip
-
-
-
-
-
Zendo International Ltd.
Alligator Clips
-
-
Alligator Clip Manufacturer Ranking
*Including some distributors, etc.Number of Employees
Newly Established Company
- NINGBO KLS ELECTRONIC CO.,LTD.: 2002 (21 years ago)
Company with a History
- NINGBO KLS ELECTRONIC CO.,LTD.: 2002 (21 years ago)
Related Products
Search from All Categories
This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.