All Categories
History
This section provides an overview for coil springs as well as their applications and principles. Also, please take a look at the list of 56 coil spring manufacturers and their company rankings. Here are the top-ranked coil spring companies as of December, 2024: 1.Wolverine Coil Spring, 2.Precision Coil Spring Company, 3.Spring Manufacturing Corporation.
Table of Contents
Categories Related to Coil Springs
A coil spring, primarily made of metal wire, stores energy when compressed, pulled, or twisted. This energy then acts as a restoring force. There are three types of coil springs based on their function: compression springs for compression, tension springs for pulling, and torsion springs for twisting.
Coil springs are widely used in automobiles and machine tools to absorb shock and vibration, and in various machines and everyday items that require a return action, such as push buttons.
Coil springs serve two primary functions: returning to their original length by repulsive force, and absorbing shock and vibration. Repulsive force applications include ballpoint pens, bicycle locks, and automatic tape measures. Shock-absorbing applications feature automobile suspensions and shock absorbers on Tarzan ropes.
Coil springs operate on elastic energy from the wire's plastic deformation. The restoring force is proportional to compressive displacement. The spring constant, determined by dividing the restoring force by displacement, varies with wire diameter. When selecting coil springs, both the spring constant and the spring length are important considerations.
For repulsive force applications, the spring constant is estimated based on the intended displacement and required force. In shock absorption, the spring constant is chosen based on displacement length and expected load. To avoid resonance, the system's natural frequency should not match external periodic forces. Often, dampers are used alongside coil springs to provide resistance and control displacement rate.
In orthodontics, coil springs apply force to teeth for corrective treatment. They are often made from cobalt-chrome alloy and chosen based on the direction of tooth movement. Open coil springs widen the gap between teeth, while closed springs are used to close gaps. It's crucial to ensure compatibility with the patient's body to avoid allergic reactions.
Automotive coil springs are integral to vehicle suspensions, often combined with shock absorbers. The spring's characteristics, like wire diameter, length, and number of turns, influence the suspension's performance. Various types of coil springs, such as equal pitch, unequal pitch, and nonlinear pitch, respond differently to shocks. While coil springs absorb shocks, shock absorbers paired with them help control vibrations more quickly.
*Including some distributors, etc.
Sort by Features
Sort by Area
Wolverine Coil Spring is an American ISO certified and IATF-16949 registered manufacturer of springs and wire forms incorporated in Grand Rapids, Michigan in 1946. The company produces compression, extension, and torsion springs as well as customized stamps and clips. It possesses multi-axis CNC machining, custom tooking, and metal forming capabilities and offers design, engineering, and prototyping services. The company has received the National Career Readiness Certificate and was a founding member of Discover Manufacturing.
Precision Coil Spring, established in 1951 in Los Angeles, California, is a manufacturer and global supplier specializing in custom precision springs and formed metal parts. The company’s product portfolio includes compression springs, extension springs, torsion springs, wire forms and assemblies. It offers end-to-end solutions starting from product design to technical support by engineering teams to ensure designs meet functional requirements and tolerances. The company’s products serve diverse industries, including medical, nuclear, and general manufacturing, meeting unique requirements and specifications. The company holds ISO-9001 and AS-9100 certifications and maintains partnerships with a network of suppliers to meet customer demands locally and internationally.
Vulcan Spring and Mfg. Co. has been a manufacturer of custom springs and assemblies since 1967, based in Telford, PA, USA. The company provides springs for various industries, including aerospace, automotive, medical, and retail displays. Their machinery and engineering expertise provides custom solutions that meet the most challenging applications. They are a USA-based, ISO-certified supplier. They are also SMI certified, Thomas verified suppliers, and a PMA member. Vulcan has global recognition from Tier 1 OEMs, design firms, and contract manufacturers. They also distribute steel strapping, seals, and tools to meet industrial bundling requirements.
Tricor Industries, Inc., is located in King of Prussia, Pennsylvania and was founded in 1984 as a manufacturer of Precision Springs and Wire forms. The company's extensive selection includes compression springs, extension springs, torsion springs, flat springs, and coil springs They even deal in custom springs, conical springs, helical springs, and die springs. They also offer a comprehensive line of stock springs which includes compression and extension Military Standard (MS) Springs. The wire inventory comprises of Alloy strips and wires of various categories like non-ferrous, high temperature and alloy steel, besides that stainless steel and carbon steel are also included.
Timac Spring Manufacturing is an ISO certified spring and wire form manufacturer based in Xenia, Ohio, USA, and founded in 1979. The company utilizes CNC machining to customize springs and wire forms to customer specifications and offers compression, extension, flat, and torsion springs in various sizes and materials. Their products, which they offer in large or small quantities as well as individual prototypes, are used in automotive, toy, aerospace, and military industries.
The D.R. Templeman Co. (DRT) is a Plainville, Connecticut-based manufacturer of custom springs and wire forms at sizes ranging from 0.004” to 0.080”. Founded in 1938, the company serves various multinational OEMs including Boston Scientific, Rubbermaid, ITW, and Tyco. The company produces a range of springs, such as torsion and compression models utilized in medical and electronic devices, as well as functional components like custom rings for sealing or connecting, and wire forms for fastening or guiding. DRT also offers various stock springs, along with quality control, testing, packaging and shipping services.
Sun Fast is based in California and was founded in 1983 as suppliers of imported fasteners. Besides fasteners and fabricated components for industrial and commercial OEM customers, they also provide contacts of offshore manufacturers for steel forgings, metal stamping, precision machining and more. Sun Fast also stands as importers and exporters of fully assembled products and metal and plastic components. They also outsource manufacturing finishing services for various production needs such as Kitting and Packaging for example adding barcodes to kit packages and etc. Their Precision Finishing services includes Zinc and Chrome plating, polishing, anodizing, powder coating and more.
Spring Manufacturing Corp., established in 1979 with headquarters in the USA, is a custom manufacturer of precision springs and metal components for the aerospace, military, and medical industries. The company's products include numerous flat-form springs, compression springs, extension springs, torsion springs, and wire forms. Spring Manufacturing Corp. also provides customers with custom design, engineering, and manufacturing of components to meet specific requirements. For example, they provided design assistance during the design phase of a latch slide spring clip part used in a heart pump battery pack.
Southern Spring and Stamping, Inc., established in 1957, is a manufacturer and supplier of springs, sheet metal fabrications, and stampings for industries such as aerospace, agriculture, electrical & electronics, construction, and pharmaceutical. The company has in-house capabilities such as painting, powder coating, and silk screening. The company is in Venice, Florida, and offers services such as CNC machining, four-slide & Vertislide forming, laser cutting, tool & die making, and welding. The company is family-run and implements the ISO 9001-certified quality management program.
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
Rockford Ball Screw, a company founded in 1973, based in Rockford, Illinois, is a manufacturer and supplier of ball screws. The company offers flagship products which include ball screws and guide rail products with various configurations and custom specifications. The products are desigend with the latest advanced technology in ball-screw and linear guide rail technology. These products are used in multiple commercial and industrial machinery applications. The company also offers services and repairs with unique linear motion techniques.
READY Technology is the North American operation of a worldwide network of factories and branch offices and is based in Dayton, Ohio. The company manufactures and distributes components to the global metal stamping, plastic mold, and automation industries. The company is ISO 9001 certified and operates through the READY brand as well as Acrotech, Amcor, Associated Raymond Spring, and other brand names. The company’s product categories include Ready Benders, Ready SuperSprings, Nitrogen Gas Springs, Cam Units, and Guiding Elements. The company offers custom machining services for die sets, raw plates, and everything up to finished products.
R.C. Coil Spring Mfg. Co., Inc. is a tight tolerance parts manufacturer established in 1959 in Glendale Heights, Illinois. The company specializes in producing various types of springs, including compression, extension, and tapered springs, as well as metal stampings, wire forms, and wire rings. Additionally, the company aids in the development of prototypes in the form of samples and small production runs. Its time-efficient approach enables a flexible turnaround of 4 to 5 weeks, which can be shortened under favorable circumstances.
Novi Spring, Inc., established in 1962 in Brighton, Michigan, USA, is a manufacturer of precision mechanical springs, wire forms, seals, and stampings. The comprehensive products are equipped with optimal quality construction and precision engineering, offering superior durability and security. These components find applications across various industries, including automotive, aerospace, medical, and industrial manufacturing. The products are used in hard drawn and high carbon wire applications and the garter springs specialize in the oil and radial shaft seal industries. The company is ISO/TS16949 certified, and accredited by LRQA.
MGM Manufacturing Alliance Corp. is a manufacturer based in Southern California, specializing in crafting precision CNC machined and fabricated components for various industries. The company’s manufacturing capabilities include CNC machining, micro-machining, sheet metal forming, gear cutting, and more. They fabricate build-to-print components from alloys such as tool steel, stainless steel, aluminum and other alloys. The company can also machine components from industrial-grade plastics such as; Delrin, Vespel, nylon and other plastic polymers. With in-house capabilities, MGM Manufacturing Alliance Corp. offers personalized service and timely delivery serving clients in diverse industries including aerospace, automotive, medical, and more.
Metal Works Corporation was incorporated in 1956 and is based in Baton Rouge, Louisiana. The company is a specialty metal manufacturer with skills in the fabrication of specialty springs of all alloys from aluminum to zirconium, custom rotating mechanical seals, and various other industrial components. The company manufactures all products in-house in Louisiana and ships to domestic and foreign customers to industries such as chemical plants, petroleum refiners, paper mills, and maritime.
Master Spring & Wire Form Co., founded in Roselle, Illinois, in 1983, is a manufacturer of custom CNC wire forms and industrial coil springs. The company's product portfolio includes Custom Compression Springs, Custom Torsion Springs and torsion springs. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
Kuriyama of America Inc., established in 1968 and based in Schaumburg, Illinois, is a manufacturer of an expansive line of thermoplastic hoses and accessories. The company stocks rubber, thermoplastic, and metal products for industrial and commercial applications, alongside accessories such as fittings and couplings. It is part of the eight subsidiaries of the parent company, and it has six distribution centers and an academy to help consumers learn about its products. It stocks products from subsidiaries like Piranha Hose Products Inc., Kuri Tec, and Hose Tec.
Keats Manufacturing Co., established in 1958 and headquartered in Illinois, USA, is a manufacturer of stampings, metalforms, and assemblies. It offers a range of products including custom metal stampings, brackets, and shields. These products are used in various industries, including the automotive, aerospace, and general manufacturing sectors. It also offers a wide range of custom and stock medical device components such as implants and prosthetics, temperature probes, and surgical devices. The company holds several certifications such as the ISO:9001, ISO:14001, and IATF:16949 certificates.
General Wire Spring Co., established in Pittsburgh, PA, in 1930 is a manufacturer of custom springs and wires stamping machines, and assembly lines, that are used to provide controlled force, tension, or compression. Their product portfolio includes compression springs, extension springs, torsion springs, wire forms and spring materials. The company's products are used in industries such as Industrial Machinery, Electronics, Automotive and Electrical Equipment. The company has a national distribution network and a customer support center.
Gardner Spring, Inc., since 1907, has been a manufacturer and supplier of springs such as compression springs, extension springs, disc springs, and extensions such as safety drawbar extensions, utility extensions, double-looped extensions, cot extensions, and ulta precision extensions used in OEM, industrial, kitchen appliances, aerospace components, and hardware industries. Located in Tulsa, OK, the company is woman-controlled and a member of the National Association of Manufacturers, C200, Spring Manufaturer Institute, Ahma, and Tama associations.
Draco Spring Mfg. Co., since 1969, has been a manufacturer of springs and wire forms/stampings. The springs are leaf springs, tapered springs, helical springs, garter springs, and clock springs, whereas the wire forms include snap rings, spring clips, sway bars, eye bolts, and football sled springs. The products are used in nuclear power, medical devices, mass transportation, automotive, and farm equipment. Located in Houston, TX, the company is ISO 9001:2015 certified with capabilities such as stocking programs, metal forming, coatings, and hot & cold coils and provides services such as parkerizing, load testing, and centerless grinding.
C & F Wire Products, established in 1995, is a manufacturer of precision custom springs such as compression, torsion, extension, and battery-contact springs, used in electronics, industrial, recreational, military and computer industries. The company located in Stanton, CA, offers services such as automatic or short-run coiling, special packaging, research & development assistance, product assembling, and in-house vibratory Tumbling. The company is ISO 9001:2015 certified and a member of the West Coast Spring Manufactures Association (WCSMA) and Spring Manufactures Institute (SMI).
ASG is a division of Jergens, Inc., was founded in 1976, and headquartered in Cleveland, Ohio. ASG both manufactures and distributes solutions for assembly including precision torque and angle DC electric fastener systems. ASG is ISO 9001:2015 certified. ASG groups include ASG Express, ASG Precision Fastening, ASG Automation, and ASG Integrated Services. Together they specialize in electric and manual screwdrivers, production aides, tool accessories, air motors, pneumatic torque control tools, pulse tools, torque wrenches, current control tool systems, automation systems, auto feed systems, air grippers, torque arms, screwdrivers & nutrunners for automation, and peripheral automation equipment.
Argo Spring Manufacturing Co., established in 1996 with facilities in the USA, is a manufacturer of springs, metal stampings, wireforms, four-slide products, and assemblies. The company's products include compression, extension, torsion, double torsion, clock, and leaf springs made from carbon steel, stainless steel, copper, nickel, and brass. Argo Spring Manufacturing Co. also offers four-slide stamping, screw machining, press brake forming, wire forming, and tube bending services. The company serves the aerospace, commercial, military, government, medical, and telecommunications industries, among others.
Anderson Quality Spring Manufacturing, established in 1993 with facilities in the USA, is a Custom manufacturer of precision springs used in the agricultural, construction, HVAC, and electronics industries. The company's products include compression springs, custom wire forms, carbon steel wave springs, and flat wound springs, such as clock springs and spiral torsion springs, made from chrome silicon, beryllium copper, stainless steel, and phosphor bronze. Anderson Quality Spring Manufacturing also offers prototyping and production in high volumes.
AARD Spring & Stamping, founded in Temecula, CA , in 1970 is a manufacturer of springs, wire forms, four slide & stamping products. The company's product portfolio includes Double Torsion Spring for the Medical Industry, Lock Latch for the Communications Industry, Extension Spring with Formed End for the Music Industry, Large Wire Torsion Spring for the Construction Industry and Wire Form for the Lighting industry. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
3Axis Development was founded in 2005 and is headquartered in Boynton Beach, Florida. 3Axis is a manufacturer of custom machinery, equipment, and tools. 3Axis offers prototyping services such as stereolithography, FDM, SLS, DMLS, 3D architectural modeling, and 3D printing. 3Axis also offers numerous manufacturing services such as injection molding, plastic prototype extrusions, waterjet cutting, precision sand castings, sheet metal fabrication, vacuum & pressure forming, Swiss CNC machining, carbon fiber prototypes, 3D custom signage, fiberglass fabrication, and medical device engineering.
Southington Tool & Manufacturing Corp. (STMC) is a manufacturer and distributor of metal stampings and wire formed products that was established in Plantsville, Connecticut in 1970. The company primarily produces power press metal stampings formed by punch and die processes, as well as fourslide stampings shaped and sized using quadruple slide cutting machines. They also offer CNC wire formed products like hooks, rings, and pins. STMC products are used by various clients in the industrial sector, including in aerospace, defense, transportation, and construction.
Production Materials Inc. was founded in 1981 and headquartered near Chicago in Wheeling, Illinois. The company is an ISO 9001:2015 certified distributor of fasteners and related components such as nuts, washers, and bolts to manufacturers as well as individuals. The company provides option types such as material, coating, and threading. The company also prototypes and designs parts and offers customization options on many of the parts available. The company also assists customers in the consolidation and standardization of existing parts along with inventory management assistance.
Hi-Tech Fasteners (HTF) was founded in 1988 and headquartered in Frederick, Maryland. HTF is a distributor of hardware components. HTF offers products in four product types: self-clinching fasteners such as studs and nuts, general fasteners & hardware, inserts, and components. HTF also offers a full line of PEM® Brand products including fasteners for metal sheets and panels, fasteners for BC boards and other non-ductile material, insert for plastics, bonding fasteners, rivet nuts, and fastener installation equipment.
Cook-Leitch Inc. was incorporated in 1964 and serves as a distributor for engineered components and metal finishing solutions. Cook-Leitch serves a number of industries including home & commercial appliances, aerospace & defense, automotive, agriculture, fluid power & hydraulics, distribution, and heavy truck & construction equipment. Some of Cook-Leitch’s product categories include powdered metal featuring Eastern Sintered Alloys, screw machine/complex shafts featuring Precision Capital LTD, springs/wire forms/stampings featuring Wire products company, split seam tubes featuring Baker Stamping, fasteners featuring Vasco Inc, and metal finishing featuring Decal Metal Finishing, Hale Performance Coatings, and Whitaker Finishing.
Gilbert Spring Co., established in 1960, located in Illinois, United States, specializing in the manufacturing and supply of springs and precision components. The company's main products include custom-made springs, wire forms, and stampings. These products are utilized in various industries, including automotive, electronics, and aerospace. Gilbert Spring Co. has expertise in creating advanced and unfailing solutions to meet the unique needs of its clients. With decades of experience, the company has ensured standard customer service, technical support, and tailored solutions to deliver quality products that exceed manufacturing standards.
IFG Instruments, Inc., founded in 1971, is a distributor of mechanical time switches, Swiss screw machining, hairsprings, lubricants & oil addictives, and bourdon tubes. Time switch products include timers, pinions, gears, and screws. The company distributes Power Up lubricants and oil additives such as NNL-69 lubricant, Hydra Maxx, Gen 49D lubricant, LHP-454 fuel addictive and spray lubricants such as RCL 1000, TL3000, and penetrating fluid 2000. The company in Barrington, IL, offers CNC machining & grinding services, deburring, rack & barrel plating, tapping, and tumbling secondary operations. The company serves the aerospace, medical, military, gauge sector, and industrial industries.
Dunham Rubber & Belting Corp. (DRB) has been in operation since 1965 and is based in Greenwood, Indiana. DRB offers a variety of products and services, including conveyor belts and accessories, hydraulic hose and fittings, industrial hose and fittings, sanitary hose and fittings, material handling and ducting, sheet rubber and gaskets, UHMW, polycarbonate, and acrylic sheets, as well as supplies for the egg processing, brewery, distillery, and winery industries. In January of 2023, DRB was acquired by Belt Power, an independent distributor and fabricator of conveyor system components.
Central Diesel, Inc was founded in 1972 by Martin R. Wittersheim and is located in Richmond, Virginia. Central Diesel is a distributor of marine, construction, mining, rental, industrial, military, state government, federal government, transportation, and agriculture industries. Central Diesel product categories include diesel engines, diesel engine electrical components, diesel engine filtration systems, diesel engine maintenance & repair, diesel engine turbocharger assemblies, diesel exhaust systems, fuel injection systems & parts, generators, and hydraulic hoses & fittings.
Nippon Stainless Springs CO., LTD , established in 1963, and headquartered in Tokyo, Japan, is a manufacturer of industrial springs. It offers Wave Springs, Coil Springs, and Rings in a wide range of materials, from Hastelloy, Inconel to titanium. Its facility is equipped with 24 coiling machines, 11 grinding machines, and 4 barrel polishers, fully prepared to shipping custom samples based on client's design request. The company holds ISO 9001:2015 certification for its quality management.
Fusehatu Kogyo Co., Ltd., founded in 1946 with headquarters in Higashiosaka City, Japan, is a manufacturer of springs and assemblies. The company's product line includes treated and straight-cut spring materials, custom-made springs, spring assemblies, and spring units (springs, plastics, and bolts). These products are primarily made to order, and custom products can be continually produced for clients with ongoing high-volume orders. The company serves many industries, including electronics manufacturing, appliance manufacturing, and vehicle suspension makers.
Maverick Spring Makers Limited, established in 1968 in Ontario, Canada, is a manufacturer specializing in custom springs. The company offers spring design and engineering services prior to the request for a quote (RFQ) process. By analyzing customers' supplied blueprints and understanding their specific needs, Maverick Spring Makers Limited provides assistance in material selection, pricing, and manufacturability, including cost minimization and maximizing fatigue life. Utilizing the finalized designs, the company manufactures different types of springs, including compression, extension, and torsion springs, with various custom finishes. These springs cater to a wide range of applications, such as electric motors, machinery, automotive sub-assemblies, and more.
MW Industries, started in 1861 and based in North Carolina, US, is a manufacturer of a wide array of precision components and products. The company produces threaded insert screws, nuts plain, and stock extension springs. Its products are used in automotive, construction, and machinery fields across the USA, Switzerland, and China. The company holds ISO 9001, ISO 13485, and IATF 16949:2016 certifications. Its products comply with the ITAR, REACH, and RoHS standards.
Stucki Industrial, A Stucki Company, is a Moon Township, PA-based manufacturer, designer, and supplier of engineered products, turnkey solutions and services to the international rail transportation market, established in 1911. The products include draft systems, truck & body side bearings, snubbing systems, hydraulic stabilizers, and resting adapters. The company offers services such as remanufacturing and direct-to-locomotive refuelling with facilities in Brazil, the United States, and Mexico, such as AlcomSprings, American Turbocharger, BR & L, Magnus, and Stucki Roller Bearing.
John Evans' Sons established in New Haven, Connecticut, in 1850 is a manufacturer of constant force springs, torsion springs, and spring-powered reels/ Their product range includes helical springs, vibration isolators, wire forms, stampings, and mechanical assemblies. The company has a global distribution network, and their products are used in industries such as aircraft & aerospace, medical devices, window manufacturing, and electric motors. In 1967, the company changed ownership, and moved 20 miles northwest of Philadelphia, to Lansdale, Pennsylvania, its current office.
Jackson Spring & Mfg. Company Inc., since 1962, has been a manufacturer wire goods and springs for the automotive, agricultural, machinery, fluid sealing, and medical industries. The springs include compression, extension, torsion, and custom springs from carbon steel, copper, stainless steel, and alloy steel wire. The Elk Grove Village, Illinois, company provides surface treatment, passivating, color coating, and CAD design services. The company is ITAR registered, ISO 9901:2015 certified, and IATF 16949:2016 certified.
Badger Precision Spring, Inc., established in 1983, is a manufacturer of custom precision springs and components such as wire forms, compression springs, torsion springs, metal stampings, and extension springs for office equipment, automotive, medical, computers, and switches sectors. The company in Genoa City, WI, provides secondary operations such as spring grinding, automatic & hand looping, hand forming, stress relief, and packaging. The first piece sample is given before production, and the company is a member of the Spring Manufacturers Institute.
ANL Spring Manufacturing, founded in 1976, is a manufacturer of springs, wire forms, clips, rings, and cable assemblies. The springs are compression springs, extension springs, torsion springs, die springs, and washer springs used in the electric, manufacturing, industrial, processing, and automotive sectors. Situated in Detroit, Michigan, the company has manufacturing capabilities such as heat treating, welding, machining, electropolishing, and galvanization using materials such as low carbon, phosphor bronze, stainless steel, beryllium copper, and zinc dichromate.
Tokai Springs industries, lnc., established in 1944 and based in Osaka, Japan, is a manufacturer and supplier specializing in the production of custom-made springs. The company offers a range of metal springs, including hot-formed compression springs, cold-formed compression springs, disc springs, flat springs, and extension springs. These springs find application in various industries, including aerospace, machine tools, robotics, architecture, seismic isolation, and various other sectors. The company holds ISO 9001, ISO 14001, and JIS Q 9100 certifications, which are accredited in accordance with ISO and JIS standards.
Tank Truck Service & Sales, Inc. has been designing and building tank trucks since 1948 and is based in Warren, Michigan. The company is a manufacturer, assembler, and distributor of tank trucks and trailers. The company's product offerings include parts and components including tank truck equipment, bulk plant and storage tank equipment, dry break or dry disconnect fittings, valves, hose, hose reels, meters, swivel joints, gaskets, and pipe sealants. Tank truck offerings include refined fuel trucks and trailers, LGP trucks, and specialty tank trucks. Additionally, The company offers metalwork, equipment work, dot testing, paintwork, and sensor repairs.
Murphy & Read Spring Mfg. Co., Inc. (MRS) is an American ISO 9001 certified manufacturer of various springs that was established in 1917. Based in Philadelphia, Pennsylvania, the company produces custom and standard springs including compression, extension, torsion, and military specification (MILSPEC) models. They also offer limited metal fabrication capabilities such as stamping, machining, and turning for related small assemblies. MRS primarily serves clients in the aerospace, general manufacturing, transportation, and energy sectors. They maintain a network of sales offices and partner distributors across the United States, Canada, and Mexico.
ASRaymond, founded in 1883, is a manufacturer and supplier of springs, metal components, functional assemblies, and hardware solutions. The springs comprise compression, lock-in-place, traction, and reducible force springs with spring washers and speed reducers. Mounting hardware includes ball studs, mounting brackets, end-fittings, and accessories utilized in the construction, aerospace, lift equipment, medical, and military industries. The Ste. A Maumee, Ohio-based company is ISO and TS certified and provides application engineering services, distribution and packaging, finishing and coating, warehousing, and customisation choices.
All Jetting Technologies Inc., in South Florida, is a family-owned company that provides affordable and quality products. The company manufactures rotating waterjet guidelines, water blast nozzles, and high-pressure and ultra-high-pressure water jetting hose fittings. It also specialize in UHP Hydro Blast surface preparations, fittings, adapters, and parts for industrial work environments in the hydro jetting industry. All Jetting Technologies, Inc. is also a distributor for Parker Hannifin's high-pressure hydroblaster , Blaster hoses, Ultra High Blaster Hoses, and Ultra High Pressure Hydroblasting Hoses
Kehr-Buffalo Wire Frame is a private enterprise established in 1953, with its headquarters situated in Buffalo, New York, and holds a good position in the business as a maker of springs, wire forms, and point-of-purchase (POP) displays. Kehr-Bufallo Wire Frame currently engages in the production of wire forms, springs, and point-of-purchase displays. The company offers its clientele sophisticated functionalities about lean production and adherence to ISO standards. The organization employs a highly skilled workforce that consistently demonstrates efficiency and adaptability in meeting consumer demands.
Springs & Things Inc., established in 1997 and located in Mississauga, Ontario, is a Canadian supplier specializing in custom springs and wire forms. The company offers a selection of custom springs, including coiled, compression, extension, flat, and torsion springs. These springs can be made from round wire or music wire, a type of high-carbon steel. Nylon, plastisol, polyvinyl chloride (PVC), and vinyl dip and spray, as well as wax after plating, can also be applied to improve performance, fulfill aesthetic requirements, and protect against corrosion. Additionally, the company provides a range of wire forms available in various types, shapes, and dimensions.
Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Wolverine Coil Spring |
4.3%
|
| 2 | Precision Coil Spring Company |
3.4%
|
| 3 | Spring Manufacturing Corporation |
2.9%
|
| 4 | Vulcan Spring & Mfg. Co. |
2.7%
|
| 5 | Tricor Industries, Inc |
2.6%
|
| 6 | Novi Spring, Inc. |
2.5%
|
| 7 | Timac Spring Manufacturing |
2.5%
|
| 8 | Sun Fast International, LLC |
2.5%
|
| 9 | The D.R. Templeman Co. |
2.4%
|
| 10 | Rockford Ball Screw Co. |
2.2%
|
Derivation Method
The ranking is calculated based on the click share within the coil spring page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
36 | 83.7% |
|
Japan
|
5 | 11.6% |
|
Canada
|
2 | 4.7% |
151 products found
151 products
Nippon Stainless Springs CO., LTD
330+ people viewing
Last viewed: 15 hours ago
Very Fast Response
The coil spring is manufactured in various shapes that are highly accurate with our own customization. In addition, we will use our abundant lineup...
2 models listed
Shinsei Hatsujo Industries Co., Ltd.
60+ people viewing
Last viewed: 5 hours ago
Standard Response
Leave the standard springs for push springs and tension springs to us. In addition to our track record of supplying products to mass retailers, we ...
Komatsuzaki Co., Ltd.
840+ people viewing
Last viewed: 13 hours ago
Standard Response
■ Characteristics ・ Because the specific gravity is light, it is suitable for lighter weight. ・ It has excellent corrosion resistance, but the sp...
10 models listed
Tokyo Hatsujo Manufacturing Co., Ltd.
80+ people viewing
Last viewed: 19 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Blitz Co., Ltd.
90+ people viewing
Last viewed: 21 hours ago
■Forged aluminum upper mount The upper mount is made of forged aluminum, achieving both high rigidity and light weight. The front strut type uses a...
Komatsuzaki Co., Ltd.
730+ people viewing
Last viewed: 5 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Shinsei Hatsujo Industries Co., Ltd.
60+ people viewing
Standard Response
■Features Like compression springs, tension springs are often used in precision machinery, home appliances, and chair springs. In particular, with ...
Tokyo Hatsujo Manufacturing Co., Ltd.
90+ people viewing
Last viewed: 15 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Komatsuzaki Co., Ltd.
440+ people viewing
Last viewed: 2 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Hayashi Co., Ltd.
60+ people viewing
Last viewed: 3 hours ago
■Summary High quality and low cost. We have contributed to the productivity of our customers by taking this as a matter of course. KiKi Die Spring ...
20+ people viewing
This is the most common "spring". Your image of a spring may be a compression coil spring. RIKEN HATSUJO INDUSTRIES has technology that other compa...
2 models listed
Tokyo Hatsujo Manufacturing Co., Ltd.
90+ people viewing
Last viewed: 19 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Blitz Co., Ltd.
80+ people viewing
Last viewed: 20 hours ago
■Dedicated shock and spring development There are also methods to increase the vehicle height such as ``replacing only the springs'' or ``adding sp...
30+ people viewing
Last viewed: 1 day ago
Conical coil springs are an effective option when there is not enough space for cylindrical compression coil springs. At Riken Hatsujo Kogyo, we co...
10+ people viewing
Last viewed: 8 hours ago
Pressure springs, also known as compression springs, are highly versatile and can be used for a variety of purposes. By adjusting the material diam...
Komatsuzaki Co., Ltd.
500+ people viewing
Last viewed: 1 day ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Tokyo Hatsujo Manufacturing Co., Ltd.
70+ people viewing
Last viewed: 19 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Komatsuzaki Co., Ltd.
490+ people viewing
Last viewed: 1 day ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
10+ people viewing
Last viewed: 22 hours ago
A spring with hooks on both ends that is used by pulling. These springs can be used in a wide variety of industries and applications, including aut...
Tokyo Hatsujo Manufacturing Co., Ltd.
70+ people viewing
Last viewed: 19 hours ago
Very Fast Response
Our company was the first in Japan to standardize springs using irregular cross-section materials. The standard created by this technology is the p...
Blitz Co., Ltd.
80+ people viewing
Last viewed: 21 hours ago
■Forged aluminum upper mount The upper mount is made of forged aluminum, achieving both high rigidity and light weight. The front strut type uses a...
10+ people viewing
Last viewed: 35 minutes ago
Kick springs are called torsion springs or torsion coil springs, and are often used in automobile parts, reclining mechanisms, stationery, and hous...
Komatsuzaki Co., Ltd.
470+ people viewing
Last viewed: 1 day ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Tokyo Hatsujo Manufacturing Co., Ltd.
70+ people viewing
Last viewed: 19 hours ago
Very Fast Response
Although it has various uses, it has received high praise as a coil spring for plastic molds. The TU series has a deflection of 65% of the free len...
Blitz Co., Ltd.
80+ people viewing
Last viewed: 21 hours ago
■Forged aluminum upper mount The upper mount is made of forged aluminum, achieving both high rigidity and light weight. The front strut type uses a...
20+ people viewing
A double torsion spring is also known as a double kick spring. It is characterized by having a left-right winding direction. A single spring would ...
Komatsuzaki Co., Ltd.
740+ people viewing
Last viewed: 3 hours ago
Standard Response
Super Spring (SuperSpring) is a standard spring that is designed to eliminate the troubles of design by selecting a spring with the required charac...
10 models listed
Samini Co., Ltd.
70+ people viewing
■Unit price by order quantity (yen) ・1-4:200 ・5-9:160 ・10-19:95 ・20-49:62 ・50-99:40 ・100-199:37 ・200-499:34 ・500-999:30 ・1,000～1,999：26 ...
