All Categories
This section provides an overview for conveyor belting as well as their applications and principles. Also, please take a look at the list of 87 conveyor belting manufacturers and their company rankings. Here are the top-ranked conveyor belting companies as of December, 2024: 1.ASGCO, 2.Wisconsin Oven Corporation, 3.TCR Inc..
Table of Contents
Categories Related to Conveyor Belting
Conveyor belting is a belt used in conveyor belts. They can be made of resin, metal, or rubber.
Installed with conveyor belts in factories, etc., conveyor belts receive the drive torque of the conveyor motor and carry all kinds of objects on the belt. Various treatments, such as antibacterial, antifungal, anti-static, heat-resistant, non-adhesive, and oil-resistant, are applied depending on the objects conveyed. The shape also varies depending on the conveyor type, such as curved or inclined conveyors.
Most conveyor belts are installed on the belt portion of the conveyor. They convey various materials, including processed food, pharmaceuticals, paper products such as banknotes and tickets, and even industrial waste.
Resin belts are often used to convey food and pharmaceuticals in sanitary environments and are treated with antibacterial, antifungal, and non-adhesive treatments.
Metal belts have excellent heat resistance, with some belts that can withstand temperatures up to 1,100°C (1,100°F) and are used for drying and cleaning with hot water.
Rubber belts transport earth, sand, crushed stones, ores, sludge, etc.
Resin belts are easy to process and can be treated with various properties such as antibacterial, antifungal, anti-static, waterproof, and non-adhesive. Cutting a groove in the center of the conveyor roll makes it possible to bond the anti-snaking resin to the back of the belt, preventing it from snaking or derailing.
Metal belts are mainly made of wire mesh. Also called a net conveyor, countless wires weave it. The wire mesh allows steam and hot water to pass easily, making it suitable for washing, sterilizing, or cooking products on the belt at high temperatures.
Rubber belts have excellent impact resistance and are suitable for carrying earth, sand, or crushed stones.
In both cases, the conveyor rolls are attached to the inside of the belt and driven by a motor. Conveyor rolls attached to both ends of the belt are pulled together in separate directions to tension the belt and rotate the conveyor rolls, which are driven by the motor, to transmit driving torque to the belt.
Conveyor belting is usually pre-endless and is joined together by welding or welding the ends of the belts together. Since installing or replacing large or long belts is not easy, engineers may go to where the conveyor belt is installed and perform the endless processing directly on-site using a welding machine.
Food conveyor belting requires a high level of hygiene management and must meet the standards of HACCP and the Food Sanitation Law. Specifically, they are required to prevent bacteria and mold and to prevent the loosening of ears that may cause foreign objects to enter the belt.
In addition to the above, other performance requirements for conveyor belts depend on the food to be conveyed. For example, excellent release properties are required for sticky food products.
Belt materials include resin materials such as polyurethane and polyester and metal materials such as stainless steel.
Stainless steel conveyor belting, in particular, has excellent durability, corrosion resistance, and resistance to cleaning chemicals. This makes it possible to convey food products that are heated or dried at high temperatures, which is difficult with resin belting and to convey cooled materials at low temperatures. Also, compared to resin belts, the belt is clean and free from the growth of bacteria, and food can be placed directly on the belt.
Canvas conveyor belting is ideal for various applications, from light to heavy loads, over short to long distances.
The most commonly known canvas conveyor belts consist of coated rubber on both sides of the canvas and a cover rubber (top and bottom surfaces) covering the outside of both coated rubbers.
Multi-layered canvas conveyor belts are also known, consisting of multiple layers of canvas, with adhesive rubber and cushioning rubber placed between the layers of canvas, and covered with cover rubber (top and bottom surfaces) on the outside of the canvas.
Nylon and polyester are the most common canvas materials, and the core is formed by interweaving these materials as warp and weft yarns.
Canvas conveyor belts have high tensile strength and excellent trough and shock absorption properties. It adapts well to carrier rollers and does not meander. The strong adhesive strength prevents delamination between the layers.
Belts with a core made of polyester warp and nylon weft yarns are interwoven. They have an extremely low elongation rate compared to nylon canvas, making them suitable for special applications.
*Including some distributors, etc.
Sort by Features
Sort by Area
Reveyron SAS, established in 1926 and headquartered in Miribel, France, is a material handling machinery and equipment designer and manufacturer. The company specializes in conveyor belts, offering double-coated polyurethane belts, PVC belts, and polyester mesh belts. It also offers a range of conveyor belt accessories, including fingers, pillow belts, and fasteners. Its accessories include finger punching machines, welding machines for guide strips, and compartment sidewall clamps. The company also offers the design, engineering, and manufacture of custom conveyor systems.
Rexnord, is a Regal Rexnord Brand, founded in 1948, and is a manufacturer of industrial lead products for the toughest applications. The products include bearings, conveying solutions, couplings, gears, industrial chains, and PT drive components. Smart solutions include smart condition monitoring systems, smart tags, and digital productivity platforms for use in aerospace, mining, beverage & food, energy, and marine markets. The Milwauke, Wi company offers services such as coupling re-certification, gap walk, gearbox repair & upgrade, custom gears & drives, and installation & rebuild services.
Industrial Magnetics Inc (IMI) was established in 1961 and is based in Boyne City, Michigan. IMI is a producer for magnetic products used in various industries such as fabrication, automotive, conveying, recycling, stamping, welding, mining & aggregate, and grain. Product offerings include magnetizers, demagnetizers, conveyor systems, magnetic conveying rail, manhole cover lift systems, raw magnetic material, lift devices, conveyor and pneumatic line magnets, magnetic inspection probes, as well as numerous magnetic tools.
ASGCO, founded in Nazareth, PA, in 1971 is a manufacturer of proprietary bulk conveyor components and accessories that enhance material flow performance. The company's product portfolio includes Manufacture & service of bulk material handling conveyor equipment, Conveyor Belt Cleaners, and Conveyor Belt Idlers. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. They also provide services including product selection, installation, preventative maintenance, troubleshooting, and repair.
Dorner Mfg. Corp is an American manufacturer and integrator of conveyor systems that was founded in 1966 in Hartland, Wisconsin. The company produces and designs conveyors as well as conveyor systems for various industrial, sanitary, and material handling applications. Its products include modular steel frame industrial conveyors, conveyors with flexible chain belts for navigating complex facility layouts, and pallet conveyors with optional handling accessories. It also offers spare parts and installation services, along with custom conveyor systems designed using CAD software. The company’s products are mainly used by clients in the food and beverage, material handling, and metalworking sectors.
Wisconsin Oven Corporation has operated since 1973 and is located in East Troy, Wisconsin. Wisconsin Oven designs, engineers, and manufactures industrial ovens and other heating equipment for numerous applications including heat treating, powder coating, paper pulp drying, finishing, drying, and curing in the aerospace, automotive, composite, energy, finishing, foundry, heat treating, annealing, military, and pharmaceutical industries. Types of ovens and equipment include custom and standard batch ovens, conveyor ovens, pollution control equipment, and walk-in ovens.
West River Conveyors & Machinery Co. is the manufacturer and supplier of conveyor systems and related equipment since 1981 and is based in Oakwood, Virginia. The company designs and constructs a wide range of conveyor systems and components. Their product line includes belt conveyors, overland conveyors, underground conveyors, and terminal equipment such as drives, take-ups, and pulleys. The company serves industries that require efficient material handling solutions and transport of bulk materials such as coal, ore, aggregates, and other resources. These industries include mining, construction, power generation, tunneling, and processing plants.
Voss Belting & Specialty Co. has been a manufacturer of flat conveyor belts, timing belts, and high-temperature fabrics since 1934, and it is located in Lincolnwood, Illinois. The company's product line covers PTFE-coated fabrics, food belting, and general handling conveyor belting. It is ISO 9001:2015 certified for quality management systems, and it provides belting solutions for packaging, printing, and FDA materials. The company specializes in custom and general fabrication of rubber products and also offers rough top belting, incline belting, and adhesive and non-adhesive belting solutions.
The Briggs Company is headquartered in New Castle, Delaware, with sales offices in Virginia and Pennsylvania. The company is a custom manufacturer of transfer-related products and coupling retention technology for all industries, also offering design, fabrication, and distribution services. The company is a member of the Hose Safety Institute and NAHAD, the National Association of Hose and Accessories Distribution. The company offers pipe & fittings, hoses and assemblies, industrial fittings & disconnects, and other industrial rubber products.
TRC Inc is in Wisconsin Rapids, Wisconsin. TRC provides metal stamping solutions, systems, consulting, repair and inspection services, and upgrades to existing systems. Their primary customers are the metal-forming equipment industries. The products offered by TRC include Coil Handling and Feed Lines; Automated Equipment and Transfer Systems; Press Controls and Safety Guarding Systems; Mechanical, Servo, and Hydraulic Presses; Die Change and Handling; and Dexco Coil Racking Systems and Equipment. T TRC Inc. is a member of the Precision Metal Forming Association.
TB Wood’s, Inc., established in 1857 and headquartered in Chambersburg, Pennsylvania, is an ISO 9001:2015 certified designer and manufacturer of industrial couplings and belted drive solutions. The company offers a range of products including industrial couplings, belted drive solutions, and highly-engineered coupling products such as Sure-Flex and Dura-Flex elastomeric couplings, Form-Flex disc couplings, and Jaw couplings. Its products are used in various industrial controls, transferring power from motors or engines to industrial machinery.
SDP/SI was founded in 1950 and is situated in New Hyde Park, New York. SDPP/SI is a manufacturer of precision gears and high-quality mechanical components used in the aerospace, industrial manufacturing, medical technology, and robotics fields. The company manufactures parts in a variety of materials including alloy steel, stainless steel, bronze, brass, nylon, and titanium. The company also provides coating services such as heat treating, zinc plating, and painting. Additional custom options are available including manufacturing to customer drawings and specifications.
Span Tech LLC., founded in 1988 and based in Glasgow, Kentucky, is a manufacturer of plastic chain conveyors that are capable of vertical, horizontal, and helical bends. The company stocks several types of conveyors like helical, wedge, and twist conveyors, and it also sells the accompanying components like drives, support structures, and chains. It serves industries like food production, manufacturing, and packaging and also offers services that include breakdown repairs, regular conveyor inspections, and service training. The company has its university with training programs to teach users about its conveyor systems.
Sierra Conveyor Corporation was established in 1980 and is headquartered in the city of Rocklin, California. The company is a full-line conveyor servicer and manufacturer. Of turn-key engineered solutions and single replacement parts for customers in the material handling industry. The company’s product line includes multiple designs of product conveying systems, pallet conveyors, sanitary belts, and other equipment and machines. The company’s services include conveyor system design, installation, project management, and machine maintenance.
Millard Manufacturing was founded in 1971 and is based in Omaha, Nebraska. The company designs builds, and installs custom machinery, equipment, and parts, primarily for the food processing industry, to help customers achieve production yields, maintain sanitary environments, reduce costs, and improve safety. The company’s design and engineering are achieved with 3D modeling software from scratch or based on customers’ designs. Manufacturing is achieved with metals ranging from light gauge aluminum to stainless steel plate. Following installation, parts and raw materials are offered as after-market support.
Lusida Rubber Products, Inc. was founded in 2000 and is based in Rosemead, United States, is a manufacturer of plastic and rubber products that have applications in the Construction, Automotive, Food Processing, HVAC, and appliance industries. The company produces conveyor belts, diaphragms, extruded seals, fabric-reinforced hoses, and, molded products, as well as ring gaskets, seals, rubber sheets, silicone heater hoses, and timing belts that are used in Furniture manufacturing, Electronics, Metal fabrication, and, Aerospace arenas. They offer molding, extrusion, rubber-to-metal bonding, engineering, and prototyping services that find uses in research institutes, the medical sector, and, the computer-accessory manufacturing industry.
Lambert Jones Rubber Co., established in 1957, and headquartered in Pittsburgh, Pennyslvania, is a manufacturer of rubber components for various industries. Their product range includes conveyor belt, gaskets, and sheet rubber. Their products find utility in industries such as automotive manufacturing, aerospace engineering, and general industrial applications. These components are crucial for sealing and preventing leaks, ensuring efficiency and safety in machinery and equipment. Lambert Jones Rubber Co. adheres to quality standards.
California Vibratory Feeders, Inc. was established in 1972 and headquartered in Anaheim, California. The company is a builder of parts handling equipment, offering custom design and engineering to meet each customer’s unique requirements. Customers are generally in the medical, automotive, aerospace, hardware, and industrial manufacturing industries. The company’s products include vibratory and centrifugal feeders, gravity tracks, and pre-feeders, while services include CAD design software Solid Works, consultation, and cooperative development of feeders.
BRECOflex CO., L.L.C., founded in 1989, is a manufacturer of high precision timing belts, pulleys, and accessories for the power transmission and precision mechanical component industries, headquartered in Eatontown, New Jersey. The company offers a wide range of products including timing belts, pulleys, tensioning clamps, tensioners, flat belts, and accessories. Their products are used in many industries including packaging, food processing, robotics, medical equipment, and more. Their state-of-the-art manufacturing facility and experienced engineering team allow it to provide custom solutions to meet the unique needs of customers with the highest level of customer service and support.
Bando USA is a power transmission belts (PTBs) manufacturer headquartered in Itasca, Illinois. Established in 1988, the company produces various conveyance solutions for automotive and industrial applications in corporations like Ford, Caterpillar, BHP Billiton, and Nestle. The company produces a wide range of PTBs from its fabrication facilities, including rib-ace belts, variable speed belts, cogged v-belts, and serpentine belts. Bando USA is a subsidiary of Bando Chemical Industries, which has 18 manufacturing plants in 17 countries across Asia, North America, and Europe.
Allstates Rubber was founded in 1968 and has operated in the Chicagoland area as a family-run business. The company manufactures, designs, and offers custom solutions for rubber machined parts for customers in the United States as well as overseas. The company offers specific custom capabilities including molding, rubber extrusions, rubber fabrication, and thermoplastic extrusions. The company offers both civilian and military-grade products, tools, and accessories. Standard product lines include rubber balls, bumpers, grommets, and suction cups.
Valmec Inc., established in the United States in 1996, is a manufacturer of cutting-edge industrial valves and fittings. As a custom-engineered solution supplier, the company caters to diverse industries, including oil and gas, petrochemicals, and energy. They can assist in all areas of material handling, system integration, packaging solutions, tier one suppliers and OEM’S. Their expertise in prototype and production packaging, program management, system integration and engineering services, assures fulfillment of all customer's material handling and packaging needs.
Rapat Corp., established in Hawley, MN, in 1975, is a manufacturer of material handling equipment, including structural steel trussed, structural steel channel, and enclosed frame belt conveyors. The company's product portfolio includes bucket elevators, corrugated sidewall belt conveyors, chain conveyors and building materials, catering to industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company also offers customer services that include support, custom research projects and customized services.
Gorbel, Inc., established in 1977, is a manufacturer headquartered in Fishers, New York, specializing in overhead and warehouse solutions. The company's products include cranes for various lifting needs, ergonomic lifting equipment for precise control and speed in different spaces, as well as fall protection systems for safety in elevated work environments. With manufacturing facilities in the United States, Canada, and China, Gorbel serves a range of industries, including aerospace, automotive, landfills, and the wind turbine market. Since 1986, Gorbel's rapid growth has led to its inclusion in the Rochester Top 100 list 18 times.
Dura-Belt, Inc., an American-based ISO certified manufacturer having its plant situated in Hilliard, Ohio, and sales office in Warsaw, Poland, specializes in producing polyurethane belts and conveyor belt components since 1987. The company utilizes a proprietary welding process and urethane, cyclothane, polyester, PVC, and other materials to produce belts suitable for power transmissions and conveyor belts. They sell standard and specialty belts such as V-belts, O-ring belts, and line shaft belts along with accessory equipment such as wheels, pulleys, spools, and sleeves. The company offers a full ten year warranty on all belts that it distributes worldwide.
Seedburo Equipment Company is a manufacturer and distributor of agricultural equipment since 1912 in Illinois. The company designs handling, testing, and grading equipment for grain, feed and seed industries and various agricultural processes such as Dividers, Moisture Testers, Grain Inspection, and Grading equipment, and seed counting and analysis equipment. There are also scales and balances, hemp and coffee equipment, Sieve Shakers, Test Sieves, and Screens amongst others that collectively serve the Agribusiness Industries.
RH Systems LLC, founded in 1998 and headquartered in Gilbert, Arizona, United States, is a designer, manufacturer, and supplier of custom temperature and humidity solutions. The company's products include SF6 gas analyzers, humidity generation instrumentation, and robust chilled mirror technology for on-site measurement of humidity, pressure, and purity in SF6 gas-insulated equipment. Its services include calibration, custom calibrations, and repairs for all customers. It primarily serves industries that include metrology and electrical power systems.
Wire Belt Co. of America, established in 1947 and based in Bedford, New Hampshire, USA, is a manufacturer and supplier of open-mesh stainless steel conveyor belting. The company's product range includes Conveyor Belts, Conveyors, Drive Components, Accessories, and Ladder Chain. These products are used for automated processing needs in various industries. They primarily serve sectors such as Food Processing, Textiles, Electronics, and Agriculture. The company offers services such as guidance on downtime prevention, black residue buildup on belting prevention, and practices to improve hygiene standards.
Belt Power Co., founded in 1989 and headquartered in Marrieta, Georgia, USA, is a manufacturer of conveyor belting and specialty fabrication products. The company specializes in producing a comprehensive range of conveyor belt varieties, including PVC, rubber, and modular belts, along with custom-made specialty belts to suit diverse industrial needs. The products offer robust durability, stability, and efficiency, resulting in enhanced conveyor performance and reduced maintenance costs for customers. These conveyor belts find extensive application in industries such as manufacturing, food processing, distribution, and logistics, providing vital solutions for material handling and transportation needs.
Forbo Movement Systems is based in North Carolina since 1919 and is known as the manufacturer and distributor of conveyor belts, power transmission belts, and modular belting solutions. The company also deals in plastic modular belts, timing and flat belts made of synthetic materials,, and processing belts. These have various applications in a wide range of industries. Such as the food belts are used for dough processing, packaging, for seafood, meat and poultry processing and etc. Other industries that benefit include the logistics and the airports for baggage handling and also the textile industry, printing industry, and lots more.
Stephens Manufacturing was started in 1957 in Tompkinsville, Kentucky. Stephens is a manufacturer and distributor of concrete-related equipment. Categories include ready mix plants, precast plants, central mix plants, RCC, environmental, and material handling. Ready mix batch plants that generally have quicker installation. Precast plants are custom built. Portable mixers mix RCC and other mixes. Environmental components include dust collectors, reclaimers, and wash down racks. Material handling includes batchers, bins, hoppers, silos, conveyors, and vertical pigs. Stephens offers assistance in customer problem solving and delivers to customers globally.
Heinrich Brothers, Inc. was founded in 2000 by Jim and Ben Heinrich and is headquartered in MacMurray, Pennsylvania. The company is a manufacturer of material handling systems used in the manufacturing, packaging, and warehousing industries. The company’s product lineup includes small components, large machines, and turnkey solutions. Components include boxes, casters, doors, and carts. Machines include conveyor systems pulleys, rollers, and systems along with mezzanines and other structures. The company offers services including layout design, assembly, installation, and repair.
The Conveyor Guys was established in 1988 and is headquartered in Marlborough, Massachusetts. The company is a designer and manufacturer of industrial conveyor systems for 3PL, warehousing, and retail customers across most of the United States including Amazon, Staples, and Verizon. The company’s 3 product lines are Conveyors, Material Handling, and Parts. The company offers services encompassing all facets of use including design, installation, service, repair, expansion, and reconfiguration of conveyors and machine handling equipment.
Bearings Industrial Supply Company, Inc (BIS) was founded in 1982 in Addison, Illinois. The company is a supplier and distributor of bearings, seals, belts, power transmission parts, and a variety of other industrial supplies to small and large customers such as Boeing and Toyota. The company isources from manufactureres such as Emerson, KOYO, Tsubaki, NTN, and Timken. The company's offerings include numerous types of bearings, many varieties of seals, several different belts, AC and DC motors, and power transmission components.
Located in Philadelphia, American Metal (AMR) is a manufacturer of hose and camlock fittings. They were founded in 1904 and serve the agricultural, oil and gas, chemical, and municipal industries. They provide a diverse selection of rubber which includes Neoprene, Silicone and natural rubber, among others. Metal products comprise a wide assortment of metal hoses and metal hose assemblies, which are military-grade and can be used for many different purposes. .AMR is not only a supplier of various parts, but also makes custom assemblies for their customers
Westerfield Sales and Services (Westerfield) was founded in 1946 in Old Brooklyn, Ohio. Westerfield is stocking caster distributer. Westerfield’s online store offers casters of a number of materials and styles including iron, hard rubber, phelonic, pneumatic, carefree, rubber, polyurethane, TPR, ductile steel, and poly on poly Westerfield also stocks other equipment such as E-tracks, straps, dollies, rubber bands, E-track load bars, furniture dolly carpet ends, hoop kits, tie offs, load bars, panel carts, platform trucks, pry bars, and shelf carts.
W.C. DuComb Company was founded in 1915 in Detroit, Michigan, where it still operates. W.C. DuComb Company is a stocking distributor of bearings, popwer transmission, and. Linear motion products, electric motors, and VS drives. W.C. DuComb Company serves industries such as conveyor and machinery OEMs, industrial processors, machine rebuilders, wastewater, sand & gravel, tool & die, steel, metals, and scrap. W.C. DuComb Company product offering lines include accessories, bearings, belts, belting, electrical, linear motion, lubricants & sealants, power transmission, and sealing solutions.
Pooley Inc. was founded in 1932 by Samuel H. Pooley as a custom fabrication conveyor belt shop in Western New York State. Pooley manufactures, distributes, and services industrial machines, supplies, and components. Pooley’s product offerings include power transmissions, industrial supplies, conveyor belting & accessories, and other industrial supplies. In addition, Pooley offers services including conveyor belting, and hose assemblies among others. Additionally, Pooley can perform liaison purchasing on behalf of customers for products not usually held in stock.
Metro Industrial Supply, Inc. is headquartered in Garfield, New Jersey. The company is a distributor of power transmission equipment factory & mill supply original European replacements parts, portable gas detection systems, proximity & photoelectric sensors. A few of the brands for which the company is a United States distributor include Balluff, Bosch, Garlock, Goodyear, Siemans, and ZKL. Many brands and products not listed online can be ordered by contacting the company directly by email or by phone call.
Lanmar Inc, founded in 1977 and based in Northbrook, Illinois, USA, is a distributor and converter of PTFE and industrial packaging materials. The product portfolio has packaging tapes, fabrics, and belts used in the aerospace, food processing, electronics, automotive, packaging, and printing industries. Lanmar distributes two types of belts, PTFE and silicone-coated fiberglass belts, used in the packaging and food processing industries. Non-PTFE electrical and industrial pressure-sensitive tapes are produced, including polyimide, U.H.M.W., plasma spray masking, and fiberglass cloth.
AIRMATIC was founded in Philadelphia in 1944. AIRMATIC serves a many industries including cement and concrete, oil, gas, energy, biomass, chemical products, feed & grain, food manufacturing, glass & ceramics, and clay. For these industries, AIRMATIC provides installation, maintenance, fabrication, silo cleaning, inspection, and repair, as well as repair and rebuilding of power tools. AIRMATIC also has an extensive lineup of products for sale including air cannons, automatic lubrication systems, belt conveyor components, flow detectors, finishing equipment, safety equipment, industrial vibrators, railcar openers and unloading equipment, rebar tools, valves and actuators, and mechanical force exciters.
Accent Bearings Co. Inc. was established in 1993 and is a distributor for industrial bearings. Accent Bearings offers a full range of bearing-related parts including ball, cylindrical, radial, thrust, and standard, as well as CAM followers, rod ends, belts, sheaves, busings, bronze busings, bar stock, pulleys, chains, sprockets, gears, speed reducers, motors, clutches, brakes, couplings, shafts, shaft accessories, oil seals, gauges, retaining rings, air cylindeers, conveyor belts, and fluid power process control equipment.
Dunham Rubber & Belting Corp. (DRB) has been in operation since 1965 and is based in Greenwood, Indiana. DRB offers a variety of products and services, including conveyor belts and accessories, hydraulic hose and fittings, industrial hose and fittings, sanitary hose and fittings, material handling and ducting, sheet rubber and gaskets, UHMW, polycarbonate, and acrylic sheets, as well as supplies for the egg processing, brewery, distillery, and winery industries. In January of 2023, DRB was acquired by Belt Power, an independent distributor and fabricator of conveyor system components.
ZHEJIANG FUDA RUBBER CO., LTD. is a conveyor belt manufacturer, established in 1989 and located in Hongchou, Zhejiang, China. The company's product range includes custom steel cord, ethylene propylene diene monomer (EPDM), and polyester-nylon (EP) conveyor belts. It also produces abrasion-resistant and high-temperature-resistant conveyor belts, along with various replacement belts. These products are used across diverse industries, including construction, metallurgy, and transportation. Certified with ISO 9001:2000, the company serves international customers in over 60 countries, including markets in the United States, Southeast Asia, and the Middle East.
BGK GmbH, established in 1982 and headquartered in Königsbronn, Germany, is a manufacturer of endless belts. The company specializes in belt processing, including perforating, punching, and grooving. Its products include polyurethane, neoprene, and silicone endless belts used in scales, packaging, and printing machines. The company's modular kits allow for the custom configuration of belts with specific carcasses, coatings, and mechanical processing. Its polyurethane is used for coatings; neoprene is chemically stable and flexible; and silicone is suitable for extreme temperatures and direct contact with food. The company's each belt type is used in medical, textiles, and glass processing industries.
Beltech GmbH, founded in 2006 and headquartered in Lüdenscheid, Germany, is a manufacturer of conveyor and power transmission belts. The company’s key products include conveyor belts, leather belts, and friction belts. Its secondary range includes technical leather products and timing belts. These products are widely used in material handling equipment and machinery driven by motors that require timed cylinder ignition. The company offers toll production and buyer label manufacturing services and exports most of its products to Turkey, India, and Thailand.
Union Kehlibar Ltd., founded in 1995, is a manufacturer headquartered in Koprivets, Bulgaria, developing packaging equipment and machines for the food processing industry. A member of Hrantechmach, a Bulgarian association for companies producing food processing machines, the company offers a range of products, including horizontal, vertical, and flowpack packaging machines. It also develops dosing machines for auger, volumetric, and weighing applications, along with wrapping and filling machines. Feeding elevators, transport belts, and other related equipment are also parts of its portfolio. With representative offices in Serbia, Romania, and Macedonia, the company caters to international clientele across several European nations.
Chiorino America, headquartered in Suwanee, Georgia, founded in 1906, is a group company of Chiorino, S.p.A., a manufacturer of lightweight conveyors and flat transmission belts. The company, which originated in Biella, Italy, specializes in producing belts made from polyurethane, PVC, and rubber and serves industries such as food, packaging, printing and paper, material handling, and wood and raw materials. Product categories offered by the company include conveyor and process belts, homogeneous and drive belts, plastic modular belts, machine tapes, and power transmission belts, among others.
Semperit AG Holding, established in 1824 and headquartered in Vienna, Austria, is a manufacturer and supplier specializing in conveyor belts. The company's products include hydraulic pressure washer hoses, steel cord belts, and textile belts. These products are used in various industries, including agriculture, steel production, and renewable energy generation. The company provides customized solutions, installation, and maintenance of its products at client sites. It is EN ISO 15236, EN ISO 14890, and ISO 284 certified, and it exports to the United States, Poland, and Canada.
Bando Chemical Industries, LTD. was founded in 1906 in Tokyo is a manufacturer of rubber for power transmission and conveyor belts. The company offers an extensive and diversified product portfolio including automotive power transmission belt products, power transmission belt products for two-wheeled vehicles, conveyor belts, efficient rollers, and polyurethane functional parts among others. These products span a wide spectrum of industrial applications including construction, housing complexes in lifts, transportation in factories, and automobiles.
NGB Elram Industries Ltd., established in 1982 and headquartered in Tsur Igal, Israel, is a conveying solutions manufacturer and supplier. The company's products include conveying belts, conveying and transmission chains, and conveyor components. It also supplies thermoplastic bearing units and plastic modular belts and specializes in the design, manufacture, and supply of mechanical, electrical, and control drive systems for livestock houses and greenhouses. The company's services include the supply of spare parts and maintenance programs.
Mulag Fahrzeugwerk Heinz Wössner KG, established in 1953 and headquartered in Oppenau, Germany, is a special vehicle and technology solution developer, designer, and manufacturer. The company specializes in a range of special equipment for airports, tunnels, and railways. Its products include orbiter conveyor belts for luggage loading and unloading, tunnel cleaning vehicles, and railway mowing machines used to clear railway lines. The company's services include after-sales maintenance, repairs, and the supply of spare parts.
Ashworth Bros., Inc., founded in 1860 and located in Fall River, Massachusetts, is a manufacturer of conveyor and transportation belting solutions. The company’s broad range of products includes metal belts, plastic belts, systems, and accessories. The company’s range of products serves a diverse range of industrial applications and industries, including food processing, manufacturing, automotive, and more. The company’s offerings are used for efficient material handling and transportation, ensuring industrial processes across sectors.
Midwest Industrial Rubber, Inc. (MIR), founded in 1980 and headquartered in Overland, Missouri, USA, is a manufacturer of conveyor belting and products. The company specializes in the distribution and fabrication of conveyor belting and conveyor accessories, providing a wide array of products including conveyor belts, pulleys, idlers, and conveyor system components. The offerings ensure efficient material handling, reduced downtime, and increased conveyor system longevity. It serves diverse industries such as manufacturing, agriculture, food processing, and distribution, where accurate conveyor systems are critical for operations to optimize material handling processes and enhance productivity.
Mitsuboshi Belting Ltd. was founded in 1919 and headquartered in Japan is a manufacturer of rubber and plastics for automotive and industrial power transmission belts. The company offers an extensive and diversified product portfolio including conveyor belts, waterproof materials for civil engineering, architectural waterproofing materials, engineering plastic materials and processing, and SF foam injection molding. These products span a wide spectrum of industries and sectors including housing complexes, transportation, automobiles, and construction as heat resistors.
Southbelt Repair And Supply Inc. Houston, TX, in 2002 is a manufacturer of parts used in engineering in industries such as Automotive and Transportation, Electronics and Semiconductors. Their product portfolio includes precision machined parts, including CNC-machined components, turned parts, milled parts, stamped parts, including metal stampings and custom metal blanks, used for applications requiring high-volume production and assembled parts. The company also offers services including product selection, installation, preventative maintenance, troubleshooting, and repair.
Megadyne Group established in West Caldwell, NJ in 1980 is a manufacturer of power transmission belts, thermoset and thermoplastic polyurethane belts, rubber timing and v-belts. Their product portfolio includes synchronous belts, such as timing belts and timing pulleys, designed for precise power transmission in synchronous drive systems, Flat Belts and specialty profile belts, used for specific power transmission. The company serves industries such as Automotive and Transportation, Agriculture and Farming and Industrial Machinery and Equipment.
Furnace Belt Co., established in Buffalo, New York in 1972, is a manufacturer of woven metal conveyor belting, including friction or positive (chain) drive applications. Their product portfolio includes woven metal conveyor belts, including flat wire belts, balanced weave belts, and compound balanced belts, designed for various industries and material handling tasks, as well as Conveyor Belt Accessories. The company serves markets including Electronics and Semiconductors, Metalworking and Machining, Glass and Ceramics and Woodworking and Forestry.
Multi-conveyor was established in 1989 and is headquartered in Winneconne, Wisconsin. The company is a designer and manufacturer of custom conveyors, devices, and systems covering all facets of packaging, food grade systems, industrial applications, and material handling applications. The company works with many materials including mild steel painted and stainless steel used in industrial conveyors, multiflex chain conveyors, and pre-engineered quick ship conveyors. The company utilizes application engineering and assists customers with project management and engineering to create systems that save on initial and total costs of ownership.
Soco System Inc. established in 1961 and based in Taastrup, Denmark, is a manufacturer and supplier of packaging machinery and equipment. The company's product range includes semi-automatic and fully automatic case erectors, non-driven conveyors, case sealers for uniform case sizes, pallet roller conveyors, and packaging tables. These tools are used for streamlining the packaging process and ensuring products are safely and systematically packaged. Serving industries such as machinery manufacturing, logistics, supply chain, and retail, these products enhance production processes. It also offers ideal service department, service contracts, and assembly and installation services.
YOKOHAMA, established in Japan in 1917 is a manufacturer engaged in tires for light truck, passenger car, commercial truck and bus, and off-the-road mining and construction applications. The company has operations in the US market, and they have distributors all around the world. Their product range includes passenger tires, marine hoses, conveyor belts, aerospace products and all kinds of wheels. The company uses carbon-neutral, resource-recycling, and sustainable procurement of natural rubber while balancing economic activities and working in harmony with local communities and nature.
Nitta Corporation is an Osaka-based manufacturer and distributor of various industrial products founded in 1885. The company offers power transmission and mechatronic products, as well as intermediate components like tubings and fittings. These are used in conveyor machines, hydraulic systems, and medical devices. The company also produces industrial parts, such as molded rubber products like gaskets or diaphragms, as well as air filters and monitoring equipment like particle counters or decontamination devices. Nitta Corporation maintains a network of manufacturing facilities and sales locations in 22 countries across four continents.
BEUMER GROUP, established in 1935 and based in Beckum, Germany, is a manufacturer and supplier of system solutions for conveying, loading, and distribution technology. The company's product range includes baggage handling systems, conveying technology, opencast mining systems, stockyard systems, and mineral processing. These products are instrumental for operations in industries like baggage handling, building materials, cement/AFR, and the chemical industry. The company's services include customer care, parts logistics, hotline support, and residential service.
Maine Industrial Corp (MIPR Corp), established in 1980, is a manufacturer and supplier of conveyor belts, gaskets, expansion joints, and more, based in Newcastle, ME, USA. The company offers a wide range of products, including conveyor belts, custom conveyors, gaskets, expansion joints, bellows, and high-temperature fabrics. These products find applications across various industries, including manufacturing, mining, shipping, food processing, and transportation. Having a robust network of 10 warehouses in various USA states, the engineering team offers quick responses, insights, workable plans, and rapid prototyping.
Fournier Rubber & Supply Company was founded in 1933 and headquartered in Milford, Ohio. The company is a distributor of industrial products from high-end manufacturers and serves numerous markets including agriculture, automotive, solar, plumbing, and medical equipment. The company’s product offerings include rubber products such as O-rings, gaskets, and tubing, as well as other products. The company offers design, development, and prototyping services for customers. In addition to in-house designs, the company offers brands such as Dixon Couplings, 3M, Kuriyama Hose, and Eaton Hose & Fittings.
California Industrial Rubber Company was founded in 1958 and is based in Fresno, California with branches across the state as well as Nevada. The company is a distributor and manufacturer of industrial rubber and plastics to agricultural, industrial, commercial, and mining markets. The company’s products include agriculture harvester products, hoses & couplings, bearings & power transmissions, and other tools, parts, and accessories. The company’s services include custom manufacturing, repair, water jetting, and CNC machining via Sliger Machineworks.
SERVICE COMPANY was founded in the 1930s in Pittsburgh, Pennsylvania. Today BEARING is a manufacturer and national distributor of bearings and power transmission parts and components. BEARING offers services such as field service inspections, damage analysis, surveys, reverse engineering, repair, part identification, and selection. BEARING parts include seals, gaskets, accessories, couplings, electric motors, gearboxes & gearing, chains, sprockets, belts, sheaves, material handling equipment, linear motion equipment, lubrication, and, naturally, many varieties of bearings.
Ace Belting Company, an American company based in Wallington, New Jersey, is a manufacturer and supplier specializing in industrial belts and equipment. The company's product portfolio includes woven endless belts, heat resistant belts, and sealing bands. These products are used in various sectors, including industrial automation, corrugated and folding box manufacturing, and food processing and packaging. The company offers services including technical support, an online store where customers can conveniently browse and purchase products, and custom fabrication tailored to the customers' specifications.
Tri-State Bearing Company was founded in 1950 and is headquartered in Evansville, Indiana. The company is an independently owned and operated distributor of a full line of bearings, mechanical power transmission, and motion control products to customers across North America in the agricultural, automotive, manufacturing, and pharmaceutical industries. The company has several product lines such as chains & sprockets, clutches & breaks, and couplings in addition to its namesake of bearings. The company also offers services such as custom-length modifications of certain components such as roller chains, electronic repair of drivers and controllers, and on-site gearbox assembly.
R. P. Crawfard Co., Inc. began in 1962 in Pittsburgh, PA. RPC primarily develops and sells industrial products but also sells and promotional and consumer products. Industrial product lines include pallet racks and other material handling equipment, warehouse equipment including platforms and production tables, and storage shelving. Promotional and consumer products include apparel with and without logos, technology-related products, backpacks, bags, and coolers, pens and markers, drinkware, flags, and umbrellas.
Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.
Goodyear Rubber Products was established in 1948 in Brooklyn, New York, and is now based in Clearwater, Florida. The company is a privately owned master distributor and fabricator of industrial rubber products serving air, water, chemical transfer, food handling, and other applications. The company provides fabrication, testing, and certification of hose assemblies to NAHAD, RMA, and U.S. Coast Guard specifications. The company has 17 product categories including expansion joints, industrial hoses, power transmission, and PVF-pipe valves and fittings. Recently, the company developed its GOOD FLEX brand of rubber products.
Bearing Distributors and Bearing Distributors & Drives have been family owned and operated since 1953 and are headquartered in Columbia, South Carolina. Bearing Distributors is a distributor of bearings, power transmission components, electric motors, and other parts from companies such as ABB, Bondhus, and American Pulley. The company has additional product segments including Industrial HVAC, Material Handling, Power Transmission Equipment, and Tools. The company offers services including branch inventory, plant surveys, vendor-managed inventory, onsite factory training, and repair services.
BDI Exppress was established in 1935 and is headquartered in Cleveland, Ohio. BDI develops and deploys custom distribution and supply chain solutions for customers across Asia, Europe, and North America. BDI serves multiple industries including automotive, primary metal, food processing, public utilities, pulp and paper, mining, material handling, bearings, mechanical power transmission, electrical power transmission and motion control, linear motion, pneumatic and hydraulic fluid power, industrial, safety, and material handling.
Prairie Machine & Parts Mfg, established in 1975 in Saskatoon, Saskatchewan, Canada, is a manufacturer and supplier of equipment for the heavy industrial and mining industries. The company offers continuous haulage conveyors for soft rock mines, continuous boring miners for high-volume ore production, and battering electric vehicles for reducing emissions in mining sites. It also offers custom manufacturing of shuttle cars, compactor rolls, and gearboxes for customers with unique projects. The company is ISO 9001-certified, and serves clients in the energy production, mining, and quarrying industries.
P.B.A Industrial Supplies Ltd. is a manufacturer and supplier of conveyor belting products established in 1992 and based in Paradise, Newfoundland, Canada. The company offers timing belts used in synchronous drive systems, modular belts for low-maintenance or high flexibility applications, and specialty belts tailored to customer specifications. It also offers flat belts for general-use conveyance operations in standard floor layouts or non-automated facilities. The company chiefly serves clients in the industrial automation, processing, and manufacturing sectors.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | ASGCO |
3.7%
|
| 2 | Wisconsin Oven Corporation |
3.7%
|
| 3 | TCR Inc. |
2.8%
|
| 4 | REVEYRON SAS |
2.8%
|
| 5 | The Briggs Company |
2.3%
|
| 6 | Industrial Magnetics, Inc. |
2.3%
|
| 7 | Rexnord |
2.1%
|
| 8 | Dorner Mfg. Corp |
2.1%
|
| 9 | TB Wood's, Inc. |
2.1%
|
| 10 | Sierra Conveyor Co., Inc. |
2.0%
|
Derivation Method
The ranking is calculated based on the click share within the conveyor belting page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
47 | 81.0% |
|
Japan
|
3 | 5.2% |
|
Germany
|
2 | 3.4% |
|
China
|
1 | 1.7% |
|
Bulgaria
|
1 | 1.7% |
|
Italy
|
1 | 1.7% |
|
Austria
|
1 | 1.7% |
|
Denmark
|
1 | 1.7% |
|
Canada
|
1 | 1.7% |
Aztec Co., Ltd.
60+ people viewing
Last viewed: 13 hours ago
■Summary ・Please adjust the tension again within 100 hours after installation. ・Please note that the size may differ depending on the model year....
Aztec Co., Ltd.
60+ people viewing
Last viewed: 13 hours ago
■Summary - Demonstrates stable running performance with STD of 2-row mowing. ・The core metal is attached to the center. ■Features ・Highly durabl...
Aztec Co., Ltd.
70+ people viewing
Last viewed: 13 hours ago
■Summary ・Please adjust the tension again within 100 hours after installation. ・Please note that the size may differ depending on the model year....
Aztec Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
■Summary Demonstrates stable traction power for use in wet fields with two-row mowing. ■Features ・Highly durable due to endless manufacturing met...
Hakaru Plus Co., Ltd.
30+ people viewing
A feeding machine using a conveyor belt. Ideal for raw materials that are difficult to supply uniformly, such as friction materials containing fibe...
Aztec Co., Ltd.
50+ people viewing
Last viewed: 1 day ago
■Summary - Demonstrates stable running performance with STD of 2-row mowing. ・The core metal is attached to the center. ■Features ・Highly durabl...
Aztec Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
■Summary - Demonstrates stable running performance with STD of 2-row mowing. ・The core metal is attached to the center. ■Features ・Highly durabl...
Aztec Co., Ltd.
50+ people viewing
Last viewed: 19 hours ago
■Summary - Demonstrates stable running performance with STD of 2-row mowing. ・The core metal is attached to the center. ■Features ・Highly durabl...
Mizushima Rubber Industrial Supplies
220+ people viewing
Used for lines that require flame retardancy to prevent fire. ■ Characteristics ･ It is a conveyor belt with self -inflammatory properties due to ...
3 models listed
Aztec Co., Ltd.
80+ people viewing
Last viewed: 11 hours ago
■Summary - Demonstrates stable running performance with STD of 2-row mowing. ・The core metal is attached to the center. ■Features ・Highly durabl...
Aztec Co., Ltd.
50+ people viewing
Last viewed: 19 hours ago
■Summary - Demonstrates stable running performance with STD of 2-row mowing. ・The core metal is attached to the center. ■Features ・Highly durabl...
Aztec Co., Ltd.
60+ people viewing
Last viewed: 16 hours ago
■2-piece set product ・Please adjust the tension again within 100 hours after installation. ・Please note that the size may differ depending on the...
Aztec Co., Ltd.
60+ people viewing
Last viewed: 13 hours ago
■Summary ・Please adjust the tension again within 100 hours after installation. ・Please note that the size may differ depending on the model year....
Aztec Co., Ltd.
50+ people viewing
Last viewed: 13 hours ago
■Summary ・Please adjust the tension again within 100 hours after installation. ・Please note that the size may differ depending on the model year....
Aztec Co., Ltd.
70+ people viewing
Last viewed: 12 hours ago
■Summary ・Please adjust the tension again within 100 hours after installation. ・Please note that the size may differ depending on the model year....
K's Belltech Co., Ltd.
20+ people viewing
Last viewed: 16 hours ago
This belt has heavy-duty links attached to both ends of the rod, enabling spiral/low tension rotation curves and straight-line layouts. Heavy duty ...
UniTKS Co., Ltd.
10+ people viewing
Last viewed: 4 hours ago
■Belt with high wear resistance and reduced friction The Uni-OWL belt was developed with a 27.9 mm pitch and high perforation ratio. The material a...
Nippon Mesh Industry Co., Ltd.
20+ people viewing
The rationalization of the industry has progressed dramatically by creating lines of work. Today, lines still flow on conveyor equipment in various...
Moriya Sangyo Co., Ltd.
150+ people viewing
Last viewed: 14 hours ago
Features ■Reducing work time to prevent cargo collapse Binding sheets for pallet packaging are easy to install and remove. To install, just wrap it...
6 models listed
Chuko Belt Co., Ltd.
150+ people viewing
■Summary This belt has G-type fabric (fluororesin-impregnated glass cloth) bonded to a rubber base material, giving it the strength and flexibility...
2 models listed
Moriya Sangyo Co., Ltd.
70+ people viewing
Excellent durability and can be used repeatedly, dramatically increasing work efficiency and reducing business costs. Compared to conventional str...
3 models listed
Moriya Sangyo Co., Ltd.
100+ people viewing
Last viewed: 21 hours ago
Excellent durability and can be used repeatedly, dramatically increasing work efficiency and reducing business costs. Compared to conventional str...
6 models listed
Moriya Sangyo Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
Excellent durability and can be used repeatedly, dramatically increasing work efficiency and reducing business costs. Compared to conventional str...
2 models listed
Mizushima Rubber Industrial Supplies
260+ people viewing
Last viewed: 1 day ago
Use the bucket to the conveyor belt with a bolt. Suitable for vertical transportation of roses. ■ Specially ･ Sand, cement, grain, etc. are suitab...
2 models listed
Mizushima Rubber Industrial Supplies
270+ people viewing
It is a line that transports transportation that is easy to adhere to the belt surface, which is ideal for reducing the decrease. Contributes to im...
3 models listed
Mizushima Rubber Industrial Supplies
210+ people viewing
A power consumption reduction conveyor belt that balances environmental protection and economics. ■ Eco -tex cover rubber effect The characteristi...
3 models listed
Mizushima Rubber Industrial Supplies
220+ people viewing
Last viewed: 12 hours ago
Ideal for transporting sharp carriers. ■ Specially ･ Because the reinforced steel cord layer is inserted on the heart canvas, it has excellent ver...
2 models listed
Mizushima Rubber Industrial Supplies
240+ people viewing
Last viewed: 1 day ago
A belt with a pier and is suitable for inclined transportation. ■ Characteristics ･ It is possible to transport a slope of about 17 ° C to 28 ° C ...
Mizushima Rubber Industrial Supplies
260+ people viewing
Last viewed: 1 day ago
Because of the unevenness with excellent cushioning properties on the top, it is suitable for transporting boxes and parts. ■ Specially ･ The unev...
UniTKS Co., Ltd.
20+ people viewing
Last viewed: 2 hours ago
■Flex L-ASB A new generation of strong 2 inch (=50.8 mm) pitch curved belt, available with and without hold down tabs (patent pending). uni Flex L-...
