42 Cooling Tower Manufacturers in 2024
This section provides an overview for cooling towers as well as their applications and principles. Also, please take a look at the list of 42 cooling tower manufacturers and their company rankings. Here are the top-ranked cooling tower companies as of November, 2024: 1.Mokon, 2.AEC, 3.Cooling Tower Products.
Table of Contents
What Is a Cooling Tower?
A cooling tower is a device designed to produce cooling water by lowering its temperature, utilizing the heat of vaporization caused by water evaporation. This principle is similar to the cooling effect of waterfalls in nature. The water used in cooling towers is typically heated by heat exchange in compressors and chillers and is cooled for reuse, enhancing the efficiency of chillers.
Uses of Cooling Towers
Cooling towers are widely used for air conditioning in buildings, shopping malls, and hospitals, as well as for cooling machinery in district heating and cooling systems, factories, and power plants.
There are two types of cooling towers: open and enclosed. Open cooling towers allow direct contact between the outside air and the cooling water, making them more efficient for air conditioning. Enclosed cooling towers, on the other hand, cool by passing the water through a heat exchanger tube and spraying water on the tube, thus avoiding contamination of the cooling water.
Principles of Cooling Towers
Cooling towers leverage the latent heat of water evaporation, which is about 2500 kJ/kg at room temperature, with the specific heat of water being 4.2 kJ/(kg-K). Evaporating 1% of the water can lower the temperature of the remaining water by approximately 6°C.
In open-type cooling towers, a fan draws in outside air, and the liquid to be cooled is efficiently contacted with the air by being poured from above. By dispersing water onto filling material with a large surface area, the contact area with the outside air is increased, enhancing the cooling effect.
For closed cooling towers, the process is similar in terms of air intake, but there is no filler material, and instead, a tube is present. The liquid to be cooled passes through these tubes, and by spraying water over them, the sprayed water vaporizes, indirectly cooling the liquid inside the tubes.
Both open and enclosed cooling tower systems require regular maintenance and cleaning to ensure sanitation and prevent the growth of legionella bacteria, which is a legal requirement.
List of 42 Cooling Tower Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Germany
- Italy
- Japan
- Taiwan
- Turkey
- United Kingdom
-
-
-
Mokon
Cooling Towers
Manufacturer Overview
Mokon is an American liquid temperature control systems manufacturer that was established in Buffalo, New York in 1955. The company produces heat transfer oil and water temperature control systems, as well as central and portable chillers. It also offers pumping tanks and stations, blown film coolers, and inline heating and cooling skid packages. Aside from its own products, the company provides maintenance products, as well as engineered and pre-engineered control panels for unique projects.
-
-
-
-
-
Dry Coolers, Inc.
Evaporative Cooling Towers
Manufacturer Overview
Dry Coolers, Inc., established in 1985 is a manufacturer of industrial cooling solutions headquartered in Oxford, Michigan, USA. The company, which has on-site engineering and fabrication departments offers various cooling technologies and custom solutions such as evaporative cooling towers, mechanical chillers, pump stations, air-cooled heat exchangers, and accessories such as plate heat exchangers, bag filters, controls, sensors, and centrifugal separators. It has passed the ASME, CSA, CE, and UL standards and is ISO 9001:2015 certified to offer products to various industries including aerospace, canning, energy, data centers, and metal treatment.
-
-
-
-
-
AEC
Cooling Towers
Manufacturer Overview
Application Engineering Company, established in 1957 and headquartered in Illinois, U.S., is a manufacturer of material handling, process cooling, and auxiliary equipments. The company's range of products includes blenders, feeders, cooling water manifolds, pneumatic conveying, and pump tanks.The ISO 9001:2015 certified company also manufactures granulators, resin handling, cooling towers, temperature controllers, and heat exchangers.The company's products are utilized in injection molding, thermoforming, extrusion and recycling facilities such as food, pharmaceutical, and plastics industry.
-
-
-
-
-
Sterling
SF Series Fiberglass Cooling Towers
Manufacturer Overview
Sterling Engineering Company, founded in the United States in 1916, is a manufacturer of advanced temperature control units, drying, and blending systems, as well as size reduction equipment and systems. It offers a range of steam control products, including condensate units, boiler feed units, temperature control valves, strainers, and steam traps. The company also provides advanced controls for temperature control units that can help avoid system shutdowns and premature equipment failure with predictive maintenance and intelligent temperature control units for clients in the plastics, hot water, manufacturing, and machinery industries.
-
-
-
-
-
Cooling Tower Products
COOLING TOWER
Manufacturer Overview
Cooling Tower Products, a company in Phoenix, Arizona, was founded in 1975 and is a manufacturer and supplier of cooling tower parts and products. The company offers replacement cooling tower parts for Marley, BAC, Evapco, Tower Tech, Recold, Imeco, Vilter, and Frigid Coil cooling towers. The products include drift eliminators, flow fill media, air intake louvers, and tower sealant. It also offers cooling tower maintenance, repair, replacement parts, cleaning, and protective coatings services.
-
-
-
-
-
LabTech, Inc
Cooling Solutions
Manufacturer Overview
LabTech, Inc. is a manufacturer of laboratory equipment and sample preparation instruments established in and headquartered in Hopkinton, Massachusetts with branches in Hong Kong, Beijing, and Italy, The company’s product portfolio includes sample preparation, and analytical instruments such as gradient HPLC, UV-Vis spectrophotometer, and isocratic HPLC as well as lab equipment such as water chillers, rotary evaporators, hotplates, digestion blocks, and vacuum pumps & controllers. The products provide solutions to analytical labs in environmental quality, food safety, pharmaceutical research, disease control, and material analysis.
-
-
-
-
-
Baltimore Aircoil Company
Cooling Tower
Manufacturer Overview
Baltimore Aircoil Company (BAC), founded in 1906 and headquartered in Milford, Delaware, specializes as a manufacturer and installer of cooling towers, evaporative condensers, and ice thermal storage systems. Employing over 1,000 individuals and active in more than 100 countries, BAC serves a broad spectrum of industries, from power generation to data centers. The company places a strong emphasis on energy-efficient solutions. Its diverse product offerings are designed for optimal performance while aiming to reduce energy consumption.
-
-
-
-
-
Tower Tech
Cooling Towers
Manufacturer Overview
Tower Tech, Inc., founded in 1984 and currently a subsidiary of Creative Pultrusions Inc. (Creative Composites Group), is an American manufacturer based in Oklahoma City, Oklahoma, specializing in cooling tower solutions. The company's offerings include modular cooling towers like industrial concrete, composite, and closed-circuit cooling towers. It also offers various related accessories such as substructures for wind loads, basin heater packages, as well as motor pre-wiring and water level control systems. Additionally, the company provides cooling tower rental services, utilizing open-circuit evaporative designs for scalable cooling solutions. These services address the need for continuous operations during planned maintenance, retrofitting, emergencies, and disasters.
-
-
-
-
-
Thermal Care, Inc.
Cooling Towers
Manufacturer Overview
Thermal Care, Inc., established in 1969, is an ISO 9001-certified industrial water chiller and process cooling equipment manufacturer in Niles, Illinois. The company ships worldwide, and has domestic and worldwide sales offices in Canada, Mexico, Central, and South America. Its product lineup includes cooling towers, portable chillers, reservoirs, and temperature controllers. Further, Thermal Care produces standardized and customized cooling systems for a vast range of industries, from food and dairy, to aviation, medical, and industrial.
-
-
-
-
-
Reynolds Culligan
Cooling Towers
Manufacturer Overview
Reynolds Culligan was founded in 1950 and headquartered in West Reading, Pennsylvania. The company is a service provider of clean water to residential, commercial, and industrial customers in industries such as food & beverage, powder coating, healthcare, and manufacturing. The company’s residential services include bottled water distribution. The company’s commercial products include deionizer systems, water softening systems, filters, and dealkalizer systems. The company’s industrial solutions also include ultrapure water systems, reverse osmosis, and ultraviolet water treatment.
-
-
-
-
-
Process Dynamics, Inc.
Cooling Towers
Manufacturer Overview
Process Dynamics, Inc., established in 2001, and located in Stow, Ohio is a manufacturer and supplier of industrial process equipments. The company's range of products includes heat exchangers, including shell and tube heat exchangers, plate heat exchangers, along with other industrial equipment such as cooling towers, condensers, evaporators, separators, and pumps, which are used in industries food & beverage, pharmaceutical, HVAC, and the power indusrties. These products are used for efficient heat transfer, cooling, separation, and fluid movement in various industrial processes and applications.
-
-
-
-
-
Pre-Heat, Inc.
Cooling Towers
Manufacturer Overview
Pre-Heat, Inc. (PHI) is an American manufacturer of heat exchangers and heat recovery systems originally founded as Construction International Inc. in 1984 before its rebrand in 2000. Based in Oostburg, Wisconsin, the company designs and produces various heat exchangers including shell and tube, in-line wave plate, and dimple plate models, as well as various cooling towers. These are commonly used in metal fabrication, oil refining, food processing, and in the drying or curing processes involved in manufacturing wood products. PHI also offers repair, replacement, retrofitting and upgrade services, as well as custom design and engineering for demanding customer projects.
-
-
-
-
-
Delta Cooling Towers, Inc.
Cooling Towers
Manufacturer Overview
Delta Cooling Towers, Inc. is a manufacturer of custom HDPE cooling towers, storage tanks, air strippers, and scrubbers for critical industrial applications. They offer a wide range of cooling towers, including force draft and induced draft cooling towers, and air strippers constructed of fiberglass, stainless steel, or aluminum. Their gas scrubbers are suitable for the removal of various gases and odor control applications. Additionally, they provide various storage tanks with a capacity ranging from 200 to 10,500 gallons, making them ideal for groundwater remediation, cooling, and water treatment in multiple fields.
-
-
-
-
-
Bondtech Corp.
Cooling Towers
Manufacturer Overview
Bondtech Corp., established in 1986 and based in Aurora, Illinois, USA, is a manufacturer and supplier of autoclave systems. The company offers specialized autoclaves for medical waste, composite curing, glass lamination, wood treatment, and large-scale sterilization needs, as well as accessories and parts, including baskets, racks, door seals, and valves. They also provide essential services such as repair, maintenance, and calibration for autoclaves. Bondtech serves industries such as consumer goods, pharmaceutical, and electrical sectors while meeting ASME standards.
-
-
-
-
-
American Manufacturing & Engineering Co.: AMECO USA
Cooling Towers
Manufacturer Overview
American Manufacturing & Engineering Co.: AMECO USA, founded in 1992, is a manufacturer of specialized high-temperature and heat-treating products like retorts, trays, and metal contaminants used in the aerospace, bridge-building, power-generation, decorative architecture, and molten metals industries. The Cleveland, Ohio-based company provides welding, plasma cutting, polishing & grinding, CNC punching, and press brake shaping services using materials like stainless steel, high carbon, nickel alloys, aluminum, and wear-resistant alloys. The company was featured on Fox Business Network's Manufacturing Marvels.
-
-
-
-
-
SPX Cooling Tech, LLC
Evaporative Cooling Towers
Company Overview
SPX Cooling Tech, LLC was established in 1957 in Overland Park, Kansas, specializing as a manufacturer and supplier of cooling solutions such as cooling towers and evaporative fluid coolers. Located in Kansas City, their R&D Center stands as the technological cornerstone for various product lines. With a network extending to over 150 global locations, SPX Cooling Tech offers localized solutions across HVAC, industrial cooling, and refrigeration sectors, covering everything from system design to maintenance.
-
-
-
-
-
Metro Hydraulic
Cooling Towers
Company Overview
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
-
-
-
-
-
-
-
Critical Power Products & Services, LLC
Cooling Towers
Company Overview
Critical Power Products & Services, LLC, founded in 2016, is a provider of data center environmental and power equipment headquartered in Post Falls, Idaho, USA. The company specializes in the disposal or acquisition of new, used, and refurbished generators, air conditioners, UPS units, and more. They are a certified Service Disabled Veteran Owned Small Business and a registered Veteran/Service Member Owned Business. Their comprehensive range of services includes equipment removal and disposal, site surveys, and consulting. They cater to industries like agriculture, healthcare, mining, regional firms, Fortune 500 companies, and more.
-
-
-
-
-
Portable Air Group
5-ton Cooling Tower
Distributor Overview
Portable Air Group, established in 2006, is a supplier of portable equipment used for air quality & air temperature management in commercial and industrial applications and is headquartered in Chapel Hill, North Carolina. It provides products such as 25-1000 KW power generation equipment, fans & evaporative coolers, heat pumps, trailer & skid-mounted units, and air-cooled, water-cooled, & split-system portables from brands such as MovinCool, KwiKool, Big Ass Fans, OceanAire, and Generac. The company offers products used in hospitals, schools, manufacturing operations, military facilities, and construction sites.
-
-
-
-
-
Total Environmental Management, Inc.
Cooling Towers
Distributor Overview
Total Environmental Management, Inc., founded in 1985, is an American supplier based in Anaheim, California, specializing in temporary and emergency cooling and heating solutions. The company offers rental services of chilled and hot water air handling units, automated cooling towers and trailers, boilers, and heat exchangers. Additionally, it provides pump skids, spot coolers, as well as heating, ventilation, and air conditioning (HVAC) units. The company also provides a range of air conditioning equipment and related services tailored for various applications, including hospital cooling systems which comply with California's Office of Statewide Health Planning and Development (OSHPD) standards.
-
-
-
-
-
Robson Industries Inc.
Cooling Towers
Distributor Overview
Robson Industries Inc., established in West Chester, PA, in 1946 is a supplier of industrial process water cooling systems including evaporative cooling towers, chillers, and heat exchangers. The company's product portfolio includes air-cooled and water-cooled chillers and towers used for processing fluids to below the ambient temperature depending on the humidity. Their products are used in markets such as Power Generation and Utilities, Petrochemical and Refineries, Food and Beverage Processing.
-
-
-
-
-
Power Mechanical, Inc.
Cooling Towers
Distributor Overview
Power Mechanical operates as both a supplier and a distributor of boilers and chillers since 1985 in Virginia. The company's product rental portfolio includes boilers, portable chillers, cooling towers, heat exchangers, and related accessories. They also sell new and used boilers and these products are supplied or rented out to a diverse customer base. For optimal performance and high efficiency, the company manufactures boiler efficiency products such as condensing and non-condensing economizers and Boiler tube scale prevention items. For clean fuel conversion, there are oil-to-natural gas burner retrofit kits and similar articles.
-
-
-
-
-
Tsung Hsing Food Machinery Co., Ltd.
Cooling Water Tower Machine
Manufacturer Overview
Tsung Hsing Food Machinery Co., Ltd., established in 1965 and headquartered in Taiwan, Thailand, is a manufacturer of food production machines. The company provides snack food production solutions and whole-plant equipment customized design services for global food factories and central kitchens. It assists clients in planning or optimizing snack food production lines, manual conversion to automation and improvement of final product quality. The company has an exclusive patented heating system, and has won the Taiwan Excellence Award in 2017 and SMEs Rising Star Award in 2019.
-
-
-
-
-
AOCNO BAKING MACHINERY CO.,LTD
Spiral Cooling Tower
Manufacturer Overview
Aocno Baking Machinery Co. Ltd is a manufacturer and supplier of bakery machines and equipment established in 1984 located in Hengshui, Hebei, China. The company’s product lineup includes pizza and rotary ovens, temperature management equipment such as spiral coolers and proofer booths, and dough sheeters and molders. It also offers complete production lines for common bakery items such as pastries, cakes, and breads. The company is CE and ISO 9000-certified, and chiefly serves its clients in Asia’s bakery, confectionery, and snack foods industries.
-
-
-
-
-
Ekin Industrial | MIT Industrial Products
COOLING TOWERS-HOW IT WORKS
Manufacturer Overview
Ekin Industrial | MIT Industrial Products, founded in 2005 and headquartered in Umraniye, Istanbul, is a manufacturer specializing in plate heat exchangers. The company offers a range of products, including heat transfer equipment, magnetic coupled acid pumps, and fluid transfer products. Additionally, it provides services such as heat exchanger servicing and maintenance training, product repairs, and installations. These products find applications in renewable energy plants, nuclear energy fields, and electricity distribution systems.
-
-
-
-
-
KOBELCO ECO-SOLUTIONS Co.,Ltd.
Cooling Tower
Manufacturer Overview
Kobelco Eco-Solutions Co., Ltd. was established in 1954 and based in Kobe, Japan, as a manufacturer and supplier of water treatment and process equipment. It manufactures cross-flow and counterflow cooling towers, film-type PVC, and splash-type polypropylene filler. It also manufactures process equipment such as reactors, heat exchangers, wiped film evaporators, storage tanks, and water filters. The company acquired several ISO certifications, including ISO 9001, ISO 14001, and ISO 55001 certifications. Its manufactured products are marketed across Southeast Asia and the UK, especially for Industrial or public use.
-
-
-
-
-
-
-
Advantage Engineering, Inc.
Cooling Towers
Manufacturer Overview
Advantage Engineering, Inc. is a manufacturer of industrial heat transfer products, established in 1977, and is headquartered in Greenwood, Indiana, USA. Their products include water chillers, temperature control units, and evaporative cooling towers, which provide energy-efficient process cooling, and reduce manufacturing time by controlling the temperature of equipment, materials, or the environment in industrial processes. Their facility in Indiana consists of a campus of three manufacturing buildings and one warehouse with over 100,000 square feet under the roof, annually producing more than 1,200 portable chillers, 120 central chillers, and 3,500 temperature control units.
-
-
-
-
-
technotrans SE
Resilient cooling towers
Manufacturer Overview
Technotrans SE, established in 1970 and headquartered in Sassenberg, Germany, is a manufacturer and supplier of temperature management equipment and systems. The company's solutions include the entire temperature management process, from cooling plants to heating and water treatment to overseeing full thermal processes. Its products include filtration equipment, pumping and spraying equipment, and containerized or central cooling systems. These products and systems are used in electroplating, chemical processing, and electroplating. Its services include onsite maintenance and the supply of spare parts.
-
-
-
-
-
Conair
Cooling Tower Systems
Manufacturer Overview
Conair, founded in Cranberry Township, PA, in 1959 is a manufacturer of resin drying, blending, feeding, and conveying/material handling equipment. The company's product portfolio includes Gravimetric Batch Blenders, Blending Accessories, Self-Contained Vacuum Loaders, Compressed Air Material Loaders and Vacuum Pumps/Dust Collectors. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company also provides services including national distribution, product selection, customized services, technical support and 7/24 customer service.
-
-
-
-
-
REYMSA Cooling Towers, Inc.
COOLING TOWERS
Manufacturer Overview
Reymsa, located in Texas, USA, was founded in 1969 as a manufacturer of non-corrosive cooling towers and fluid coolers. The company products include cooling towers and fluid coolers which are thermal performance certified, are sustainable, have a low environmental impact, low consumption of energy and help reduce maintenance, time and cost. The company is STD-201 certified and is present in the USA through Rep network offices with distribution and service centres. Its products and services meet customers’ needs, punctually and consistently.
-
-
-
-
-
UMD Automated Systems
Cooling Towers
Manufacturer Overview
UMD Automated Systems is a manufacturer of material handling and processing systems since 1996 and they are located in Fredericktown, Ohio. The company engineers and produces material handling systems and machinery that improves the operations and productivity of many manufacturing companies. Such as tire manufacturers require machines like cutters and slitters, cooling and conveyor systems, tire trimmers, and other equipment, which is provided by UMD. Similarly, the Automotive industry utilizes dock loading systems, lifts, sorters, conveyors, turn tables and etc., which are supplied by UMD for a smooth assembling process of new automotive products.
-
-
-
-
-
American Cooling Tower, Inc.
Cooling Towers
Manufacturer Overview
American Cooling Tower, Inc., founded in 1980 and headquartered in Santa Ana, California, is a custom manufacturer and turnkey systems integrator that offers engineering, design, and construction services for cooling towers. Some of the products offered by the company include cross-flow, counter-flow, wood structure, and concrete cooling towers. The company also offers pumps, heat exchangers, separators, and sand filters. Its primary goal is to provide cooling solutions for commercial applications within the process and power industry. The company has been granted CTI 201 certification by the Cooling Technology Institute for its ACF series, a line of counter-flow induced draft cooling towers.
-
-
-
-
-
Krones
Cooling tower
Company Overview
Krones, founded in 1951 and headquartered in Neutraubling, Germany, is a manufacturer and supplier of machines for the beverage industry and food producers. The company serves the beverage industry and food producers with process technology, filling technology, and packaging machines. It also provides plastics recycling systems with consulting services, and individual tests and analyses carried out for the customer. The company also provides other services such as digitalization, pre-owned machines, and on-site services.
-
-
-
-
-
MITA Cooling Technologies S.r.l.
PMS Evaporative Open-Circuit Cooling Tower
Company Overview
MITA Cooling Technologies, founded in Italy in 1960, is a manufacturer and supplier of cooling systems. It offers a range of cooling products, including adiabatic dry coolers and adiabatic condenders, open-circuit cooling towers, closed-circuit cooling towers, and evaporative condensers. It also provides services like cooling water maintenance, remote management, and cooling advisory services, as well as software programs and technical advice to help customers select water-efficient and sustainable cooling technologies.
-
-
-
-
-
Luce, Schwab & Kase, Inc.
Cooling Towers
Company Overview
Luce, Schwab, and Kase, inc. was founded in 1957 and is headquartered in Fairfield, New Jersey with additional offices in New York and New Jersey. The company is a distributor and engineer of refrigeration and air conditioning products from manufacturers such as MovinCool, Mitsubishi Electric, Fraser-Johnston, Armstrong Air, and Magic-Pak. The company’s featured products include Mitsubishi Electric Crane HVAC and Unicom System heating and cooling systems. The company also provides training for numerous types of HVAC devices and Mitsubishi Authorized training center classes.
-
-
-
-
-
ABCO HVACR Supply & Solutions
Cooling Towers
Company Overview
ABCO HVACR Supply & Solutions is a manufacturer of heating, ventilation, air conditioning, and refrigeration solutions headquartered in United States and founded in 1949. With a strong presence in the market, ABCO offers a wide range of high-quality HVACR products and equipment to residential, commercial, and industrial clients. They provide customized solutions, efficient service, and top-notch customer support. ABCO's team of skilled technicians and engineers ensures seamless installation and maintenance services, making them a trusted partner for all HVACR needs.
-
-
-
-
-
-
-
Aggreko
Cooling Towers
Company Overview
Aggreko, founded in 1962, is a global provider of temporary power, energy, and temperature control solutions. The company has over 60 years of experience and 6,000+ employees worldwide, It provides flexible, eco-friendly power options to industries like businesses, governments, utilities, pharmaceuticals, construction, shipping, mining, and petrochemical, among others. With a vast global presence of 60 locations, Aggreko is ISO 45001, ISO 9001, ISO 9001 (Canada), ISO 14001, and OHSAS 18001 certified. Their product line includes solutions like power generation, gas generators, diesel generators, industrial air conditioners, temperature control, cooling towers, rental power, and more.
-
-
-
-
-
CMH Manufacturing Company
Casting Cooling Tower
-
-
-
-
-
Kelvion Thermal Solutions Holding GmbH
modular cooling tower system
-
-
Cooling Tower Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Mokon |
8.8%
|
| 2 | AEC |
7.0%
|
| 3 | Cooling Tower Products |
6.1%
|
| 4 | Dry Coolers, Inc. |
5.1%
|
| 5 | Tower Tech |
4.3%
|
| 6 | Thermal Care, Inc. |
3.7%
|
| 7 | Reynolds Culligan |
3.3%
|
| 8 | Sterling |
3.2%
|
| 9 | LabTech, Inc |
3.2%
|
| 10 | Baltimore Aircoil Company |
3.2%
|
Derivation Method
The ranking is calculated based on the click share within the cooling tower page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Hitachi Metals, Ltd.: 27,771
Newly Established Company
- American Manufacturing & Engineering Co.: AMECO USA: 1992 (32 years ago)
- Total Environmental Management, Inc.: 1985 (39 years ago)
- Power Mechanical, Inc.: 1985 (39 years ago)
Company with a History
- Sterling: 1916 (108 years ago)
- Krones: 1951 (73 years ago)
- Hitachi Metals, Ltd.: 1956 (68 years ago)
Cooling Tower Manufacturers in United States
*Including some distributors, etc.
- Mokon
- Dry Coolers, Inc.
- AEC
- Sterling
- Cooling Tower Products
- LabTech, Inc
- Baltimore Aircoil Company
- Tower Tech
- Thermal Care, Inc.
- Reynolds Culligan
- Process Dynamics, Inc.
- Pre-Heat, Inc.
- Delta Cooling Towers, Inc.
- Bondtech Corp.
- American Manufacturing & Engineering Co.: AMECO USA
- SPX Cooling Tech, LLC
- Metro Hydraulic
- IQS Directory
- Critical Power Products & Services, LLC
- Portable Air Group
- Total Environmental Management, Inc.
- Robson Industries Inc.
- Power Mechanical, Inc.
Global Distribution of Cooling Tower Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
23 | 69.7% |
Japan
|
3 | 9.1% |
|
Germany
|
2 | 6.1% |
Taiwan
|
1 | 3.0% |
China
|
1 | 3.0% |
Turkey
|
1 | 3.0% |
United Kingdom
|
1 | 3.0% |
Italy
|
1 | 3.0% |
List of Cooling Tower Products
3 products are listed.
Tada Electric Co., Ltd
High service life & maintenance -free sealing tower
40+ people viewing
The sealed cooling tower is a device that removes heat from the circulating water flowing inside the cooling tube using outside air and water. ■ C...
