12 Mold Temperature Controller Manufacturers in 2024
This section provides an overview for mold temperature controllers as well as their applications and principles. Also, please take a look at the list of 12 mold temperature controller manufacturers and their company rankings. Here are the top-ranked mold temperature controller companies as of November, 2024: 1.Thermal Care, Inc., 2.Matsui America, Inc., 3.HX-DAYA.
Table of Contents
What Is a Mold Temperature Controller?
A mold temperature controller is a device used to maintain the temperature of molds used in injection molding, extrusion molding, and other plastic product molding processes at a constant temperature.
Mold temperature is affected not only by seasonal variations but also by temperature differences between morning and evening. Mold temperature controllers must maintain a constant mold temperature to stabilize the quality of molded products.
This is similar to a mold cooler (chiller). Mold chillers specialize in circulating chilled water to lower mold temperature. On the other hand, mold temperature controllers use oil and water as the circulating medium, making it possible to maintain a constant mold temperature not only at low temperatures but also at temperatures of 100°C or higher.
Uses of Mold Temperature Controllers
Mold temperatures that are too high or too low can significantly affect the quality of molded products. Low mold temperatures cause flow marks, cracks, luster defects, and other problems. On the other hand, too high a mold temperature can cause warpage, dimensional defects, sink marks, etc.
Mold temperature controllers maintain a constant mold temperature and prevent these defects.
Water-based mold temperature controllers can control temperatures up to about 90°C. Oil-based mold temperature controllers can control temperatures higher than that. Oil-based mold temperature controllers are used to control temperatures above that level.
For example, polyvinyl chloride (PVC), polycarbonate (PC), polypropylene (PP), and polystyrene (PS) use water-based mold temperature controllers.
On the other hand, PET (polyethylene terephthalate) and PPS (polyphenylene sulfide), which require control at high temperatures, use oil-based mold temperature controllers.
Principles of Mold Temperature Controllers
- Principle of Temperature Control: Mold temperature controllers keep the mold's temperature constant through heat exchange by circulating a temperature-controlled medium, such as water or oil, through piping that passes into the mold.
Heat exchange refers to transferring heat energy from the hotter mold to the cooler water or oil medium. The temperature difference between the temperature of the medium entering the mold and the temperature of the medium leaving the mold is one indicator of the performance efficiency of mold temperature controllers.
Water mold temperature controllers use a direct cooling method to control the temperature by controlling the circulation and discharge of water through pipes that pass into the mold. On the other hand, an oil-based mold temperature controller uses an indirect cooling method in which an oil medium circulates in the mold piping, and the temperature of the medium is controlled by the cooling water.
- Usefulness of Mold Temperature Controllers: In injection molding, cooling the hot resin stabilizes the shape of the molded product and allows it to be removed from the mold. Although mold release is possible without a mold temperature controller by releasing heat to the outside air, using a mold temperature controller stabilizes the quality of the molded product and promotes rapid mold release, thereby improving production efficiency.
List of 12 Mold Temperature Controller Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Taiwan
-
-
-
Thermal Care, Inc.
Mold Temperature Controllers
Manufacturer Overview
Thermal Care, Inc., established in 1969, is an ISO 9001-certified industrial water chiller and process cooling equipment manufacturer in Niles, Illinois. The company ships worldwide, and has domestic and worldwide sales offices in Canada, Mexico, Central, and South America. Its product lineup includes cooling towers, portable chillers, reservoirs, and temperature controllers. Further, Thermal Care produces standardized and customized cooling systems for a vast range of industries, from food and dairy, to aviation, medical, and industrial.
-
-
-
-
-
Matsui America, Inc.
MC5
Company Overview
Matsui was established in 1912 and is based in Hanover Park, Illinois, and is a manufacturer and supplier of industrial auxiliary equipment for various industries The company has ISO 9001:2015, ISO 14001:2015 & ISO 45001:2018 certifications and provides dryers & grinders, mold temperature controllers, loaders, blenders, and, engineered systems & parts as well as technical consultation, equipment installation & operator training, and, centralized control and monitoring services for material tanks & silos, centralized conveying systems, plastic recycling & regrinding systems, automation, and, waste-water treatment industries.
-
-
-
-
-
HX-DAYA
Mold Temperature Controller
Manufacturer Overview
HX-DAYA was established in 2005 and is based in Ningbo, Zhejiang, China, and, is a manufacturer of plastic Injection Molding Machines for various applications. The company offers servo motor & high-speed injection molding machines, PET preform injection molding machines, buckets injection molding machines, plastic crate machines, and, plastic auxiliary machines for the multi-color products manufacturing sector, PET injection machine production line market, thin-wall product production, packaging & thermoplastic processing, and, building construction sectors.
-
-
-
-
-
MATSUI MFG. CO., LTD
Temperature Controllers
Manufacturer Overview
Matsui Mfg. Co., Ltd., founded in 1912 and based in Osaka, Japan, is a manufacturer and distributor of plastic molding equipment and systems. Its product range includes resin dryers, resin conveyors, mold temperature controllers, resin blenders, and resin granulators, designed to optimize the molding process. These products enhance the resource productivity of customers' molding factories. The company holds ISO 14001 certification for environmental management systems, and its Indian subsidiary, Matsui Technologies India Limited, is TUV Certified ISO 9000 and CE Certified for European business, reflecting a adherence to quality and environmental responsibility.
-
-
-
-
-
Shenzhen Hailingke Refrigeration Machinery Equipment Co., Ltd
Mold Temperature Controller series
Company Overview
Shenzhen Hailingke Refrigeration Machinery Equipment Co., Ltd was founded in 2007 and is based in Guangdong, China, and is a manufacturer and supplier of industrial chillers and related equipment for various applications. The company provides chillers in different models such as Air Cooled, Water Cooled, and, Screw series along with Mold temperature controllers, and, refrigeration spare parts that have applications in plastic & rubber, chemical, medical, construction & packaging, and, electronics & electrical industries.
-
-
-
-
-
Suzhou LESINTOR mechanical and electrical Co., Ltd
Mold Temperature Controller
Company Overview
Suzhou LESINTOR Mechanical and Electrical Co., Ltd. was founded in 2000 and is located in Suzhou Wujiang, China, and is a manufacturer and supplier of injection molding auxiliary machines for various industrial applications. The company has ISO9001 & German TUV certifications and provides machines in various models namely crushing & recycling series, cold & hot temperature control series, mixing color series, and drying & conveying series along with dust removal & suction machines, mold temperature controller, and plastic crushers that have applications in medical, injection molding, material handling, automotive, and, food & beverages sectors.
-
-
-
-
-
Shenzhen Hero-Tech Refrigeration Equipment Co., Ltd
Mold Temperature Controller
Company Overview
Shenzhen Hero-Tech Refrigeration Equipment Co., Ltd, a company established in 2010, based in Shenzhen, Guangdong province, China, is a manufacturer and supplier of industrial cooling and temperature controlling products. The company provides various products such as air cooled and water-cooled scroll chiller, screw type chiller, glycol chiller, laser chiller, oil chiller, heating and cooling chiller, mold temperature controller, cooling tower. These products are designed to help lower environmental impact with next-generation, low Global Warming Potential (GWP) refrigerants and high-efficiency operation. The products are used for various applications such as power generation, distribution, and industrial automation.
-
-
-
-
-
GuangDong Soxi Intelligent Equipment Co., Ltd.
Mold Temperature Controller
Company Overview
GuangDong Soxi Intelligent Equipment Co. Ltd. was established in 2017 and is based in Shenzhen, China, and is a manufacturer and supplier of injection molding machines and standard & non-standard automation integration systems for various industrial applications. The company provides plastic dryers, mold temperature controllers, autoloaders, plastic crushers and mixers, and, industrial chillers as well as plastic molding machinery and automation systems for the central loading process, central water supply, power production, purification system, and, central gas supply system sectors. The company has ISO9001:2015, CE, and, patent production certifications, and its customers include DuPont, Flextronics, Whirlpool, Newmarket, and Mattel.
-
-
-
-
Company Overview
Aumax Industrial (HK) Limited was founded in 1998 and is based in Hong Kong, and is a manufacturer and supplier of machinery & equipment for various industrial applications. The company provides plastic crushers, granulators, plastic shredders, industrial water chillers, and, cooling towers along with vacuum hopper dryers & loaders, plastic color mixers, mold temperature controllers, volumetric dosing units, and, gravimetric blenders & dehumidifiers for plastic processing, molding, and recycling industry as well as for automotive, chiller & air coolant manufacturing, and, material handling sectors.
-
-
-
-
-
TopChiller
Mold Temperature Controller
Company Overview
TopChiller was founded in 1999 and is based in Mongkok Kowloon, HongKong, and is a manufacturer and supplier of air-cooled chillers and water-cooled chillers for various industrial & commercial applications. The company has CE, ROHS, & EN ISO 121002010 Mechanical Safety certifications and offers different types of chillers in portable, industrial, packaged, scroll & screw, and, glycol & oil as well as modular, recirculating, centrifugal, and process models along with mold temperature controllers for welding, medical & laser, fermentation chambers & brewery process, semiconductor, and, hydroponic water-treatment industries.
-
-
-
-
-
TOP UNITE MACHINERY CO., LTD
Mold Temperature Controller
Distributor Overview
TOP UNITE MACHINERY CO., LTD was founded in 1976 and is based in Taiwan, and is a supplier of high-precision plastic injection molding machines for various industrial applications. The company offers horizontal plastic injection molding machines, dual color servo machines, vertical servo energy-saving plastic Injection molding machines, peripheral equipment, and, dehumidifying dryers for sports equipment production, thin wall products manufacturing, automobile accessories, medical supplies, and, consumer electronic product industries and also for household appliances, and, construction sectors.
-
-
-
-
-
Yushine
Mold Temperature Controller
Distributor Overview
Yushine was founded in 2008 and is based in Dongguan, China, and is a supplier of plastic processing auxiliary equipment for various industries. The company provides plastic crushers, industrial chillers, plastic dehumidifying dryers, molding temperature controllers, and, hopper loaders as well as volumetric dosers, PVC belt conveyors, gravimetric blenders, plastic accessories, and, injection mold clamps that have applications in welding, medical & laser, fermentation chambers & brewery process, semiconductor, and, hydroponic water-treatment industries and also offers drying & dehumidifying, feeding & conveying, dosing & mixing granulating, and recycling services.
-
-
Mold Temperature Controller Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Thermal Care, Inc. |
33.8%
|
| 2 | Matsui America, Inc. |
15.5%
|
| 3 | HX-DAYA |
8.5%
|
| 4 | TOP UNITE MACHINERY CO., LTD |
8.5%
|
| 5 | Shenzhen Hero-Tech Refrigeration Equipment Co., Ltd |
8.5%
|
| 6 | Yushine |
5.6%
|
| 7 | Shenzhen Hailingke Refrigeration Machinery Equipment Co., Ltd |
4.2%
|
| 8 | GuangDong Soxi Intelligent Equipment Co., Ltd. |
4.2%
|
| 9 | Aumax |
4.2%
|
| 10 | Suzhou LESINTOR mechanical and electrical Co., Ltd |
2.8%
|
Derivation Method
The ranking is calculated based on the click share within the mold temperature controller page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- MATSUI MFG. CO., LTD: 1,100
Newly Established Company
- Shenzhen Hero-Tech Refrigeration Equipment Co., Ltd: 2010 (14 years ago)
- TOP UNITE MACHINERY CO., LTD: 1976 (48 years ago)
Company with a History
- TOP UNITE MACHINERY CO., LTD: 1976 (48 years ago)
- Shenzhen Hero-Tech Refrigeration Equipment Co., Ltd: 2010 (14 years ago)
Mold Temperature Controller Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Mold Temperature Controller Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
China
|
8 | 72.7% |
United States of America
|
2 | 18.2% |
Taiwan
|
1 | 9.1% |
