10 FRP Drain Manufacturers in 2024
This section provides an overview for frp drains as well as their applications and principles. Also, please take a look at the list of 10 frp drain manufacturers and their company rankings. Here are the top-ranked frp drain companies as of November, 2024: 1.Trench Drain Systems, 2.ACO USA, 3.Omkar Composites Private Limited.
Table of Contents
What Is an FRP Drain?
FRP drains are drains made of a "fiber-reinforced plastic" called FRP. There are vertical drains and horizontal drains. FRP drains are often used because they are lightweight, strong, waterproof, and durable.
FRP is used as a waterproof layer and FRP drain parts are also seamless and highly effective in preventing water leakage.
Uses of FRP Drains
FRP drains are used on balconies and verandas on the rooftops of ordinary houses and buildings. If the flooring material is FRP waterproofed, FRP drains are especially effective in preventing leakage. Inexpensive non-FRP drains often cause separation from the waterproof layer, but FRP drains are compatible with the FRP waterproof layer and provide a good seal.
FRP drains are installed with nails or caulking. Make sure they are tightly sealed to prevent air from entering the gap, and caulk them again after installation to improve waterproofing.
Principle of FRP Drains
The FRP in FRP drain refers to fiber-reinforced plastic, a composite material made of unsaturated polyester and glass fiber, which is highly waterproof and durable.
FRP drains consist of an FRP flange and a vinyl chloride body. The shape of the flange differs between the vertical and horizontal types, and using the same FRP drain for the FRP waterproofed floor and drainage prevents the drain from peeling off from the waterproof layer, thereby preventing leakage. For this reason, FRP drains are used together with FRP waterproofing on residential balconies, rooftops, swimming pools, etc.
Horizontal FRP drains make holes in the horizontal wall instead of the floor, allowing wider use of the floor. Drainage efficiency is lower than that of vertical drains, but they are easier to install and replace because they are easier to prepare the substrate.
Vertical FRP drains are difficult to process because holes are drilled in the floor, but they are characterized by their high drainage efficiency. Even if the waterproof layer and drain should separate, water will not leak if it does not flow back.
FRP drains for renovation have a large flange and are easy to process.
List of 10 FRP Drain Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Australia
- China
- India
- Italy
-
-
-
-
-
-
-
-
-
Langfang Bonai Environmental Protection Technology Co., Ltd.
FRP Drainage Channel
Manufacturer Overview
Langfang Bonai Environmental Protection Technology Co., Ltd., established in 2008, is a manufacturer of FRP roof tiles and related building materials headquartered in Langfang City, Hebei Province, China. The company's product portfolio comprises PVC corrugated sheets, PVC resin tiles, PC solid boards, FRP gel coats, and FRP gutters & sheets used in a variety of applications, including residential, commercial, and industrial buildings. In addition to manufacturing FRP roof tiles, Langfang Bonai also offers a range of related products, including FRP wall panels, FRP skylights, and other building materials.
-
-
-
-
-
M.M. srl
FRP drainage channel
Manufacturer Overview
M.M. S.r.l. was established in 1977 in Italy, is a manufacturer of fibreglass FRP and GRP grating. The company has been growing steadily in its dimensions, operating on 2 plants of 2.000 m2 each and on an open total surface of 13.000 m2, as well as in its product range, that is now not only restricted to FRP - GRP grating. It provides specific solutions to its customers by offering value-added services, such as technical engineering, structural calculating for composite materials, feasibility studies for new fiberglass FRP - GRP gratings, profiles and structures, corrosion studies, technical advice, cutting and shaping.
-
-
-
-
-
Omkar Composites Private Limited
FRP Drain
Manufacturer Overview
Omkar Composites Private Limited, founded in 2014 and headquartered in Bharuch, Gujarat, India, is a manufacturer of chemical processing equipment. The company's main products include industrial pressure vessels, HDPE chemical storage tanks, and tank scrubber systems. It also produces centrifugal blowers, FRP gratings and pipes. These products are used in the food and beverage, pharmaceutical, and chemical processing industries. The company's services include custom product and system production and shipping logistics management.
-
-
-
-
-
Nantong Mach's
FRP Drain Grating
Company Overview
Nantong Mach's, established in 2005 and headquartered in Nantong City, Jiangsu Province, China, is a manufacturer and supplier of fire protection, environmental protection, and safety supplies. The company offers molded FRP gratings, pultruded FRP gratings, pultruded FRP profiles, FRP gratings & profiles, and grating clips used as walkways, bridges, industrial floors, operating platforms, and guardrails. The company has passed the ISO 9001 and ABS(American Bureau of Shipping) certification and ASTM-E84 class A test (fire retardant) and offers products used in various industries such as power plants, sewage treatment plants, food processing plants, nuclear power plants, and battery factories.
-
-
-
-
-
-
-
-
-
CMaterials
FRP Drainage Channel
-
-
FRP Drain Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Trench Drain Systems |
21.4%
|
| 2 | ACO USA |
21.4%
|
| 3 | Omkar Composites Private Limited |
14.3%
|
| 4 | Langfang Bonai Environmental Protection Technology Co., Ltd. |
10.7%
|
| 5 | Liberty Pultrusions FRP Manufacturing |
10.7%
|
| 6 | M.M. srl |
7.1%
|
| 7 | Nantong Mach's |
3.6%
|
| 8 | CMaterials |
3.6%
|
| 9 | Grating Tasmania Pty Ltd |
3.6%
|
| 10 | THERMOSET POLY PRODUCTS I PVT. LTD. |
3.6%
|
Derivation Method
The ranking is calculated based on the click share within the frp drain page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
- Nantong Mach's: 2005 (19 years ago)
- THERMOSET POLY PRODUCTS I PVT. LTD.: 1993 (31 years ago)
- Omkar Composites Private Limited: 1986 (38 years ago)
Company with a History
- M.M. srl: 1977 (47 years ago)
- Omkar Composites Private Limited: 1986 (38 years ago)
- THERMOSET POLY PRODUCTS I PVT. LTD.: 1993 (31 years ago)
FRP Drain Manufacturers in United States
*Including some distributors, etc.
Global Distribution of FRP Drain Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
3 | 33.3% |
China
|
2 | 22.2% |
India
|
2 | 22.2% |
Italy
|
1 | 11.1% |
Australia
|
1 | 11.1% |
