LED LF400 series for high ceilings
MGMT
About This Product
It is an LED lamp attached to high ceilings such as warehouses, factories, and gymnasiums.
The LED conversion that gives the same brightness as the mercury lamp can be performed with the wiring work required * 1.
You can enjoy the effect of greatly reducing power consumption with a small budget.
･ LED is possible by replacing it with HID lamps (mercury lamps, metal halide lamps, sodium lights) (no stable wiring work required)
It can be used directly by the AC power supply by wiring work
･ Maximum power consumption reduced by about 60%(compared to mercury lamps, confirmation of our company)
･ Design life 60,000 hours (at 40 ° C)
･ Built -in overcurrent and over -voltage protection circuit
･ Control flicker by high frequency lighting
･ Adjustable direction in the direction of irradiation
･ Indoor -only
-
Product
LED LF400 series for high ceilings
-
Handling Company
MGMT
1 Models of LED LF400 series for high ceilings
| Product Image | Part Number | Price (excluding tax) | Abnormal monitoring by CPU | Admitted color (RA) | All light bundles (when using one light equipment) Magnetic type | All light bundles (when using one light equipment) directly connected to the AC power supply | All light bundles (when using one light) electronic type | Beam angle | Color temperature | Compatible equipment universal compatible | Design life | Direct illuminance (10m, when using one light) electronic type | Directly connected to the power consumption AC power supply (when using one light equipment, please consider it as a guide because there are variations due to the type of stabilizer and LED elements) | Directly under illuminance (when using 10m, 1 light equipment) directly connected to AC power | Immediately under illuminance (10m, when using one light equipment) Magnetic type | Insulation resistance | Mass body | Mass drop prevention wire | Material | Mounting | Operating temperature limit | Power consumption (when using one light equipment, please consider it as a guide because there are variations due to stabilizer and LED elements) | Power consumption electronic type (when using one light equipment, please consider it as a guide because there are variations due to stabilizer and LED elements) | Safety standard | Supply power supply (when directly connected to AC power) | Used humidity range | Withstand voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LF400-U1 |
$ 1,152.00〜 | Monitor output from a stabilizer and inform you in the event of an abnormality (turn off, blink, minimum brightness) | 82 | 29,000lm | 29,000lm | 39,000lm | 110 ° | 4600 ~ 5500k | ・ Magnetic type for 400W ・ Electronic type for 400W ・ AC power supply directly connected power supply unit: E39 Note 1) It may not be partially turned on even if it is a compatible equipment. Note 2) Please remove the instrument's slope (sedi). Note 3) In the case of a two-light type, be sure to replace two units at the same time because the use in combination with the Taketsu LED or HID lamp other than the LF400-U1 may cause a failure. Note 4) It is recommended to replace equipment that exceeds the legal useful life because it causes the product to fall or fire due to deterioration. Note 5) Be sure to attach the attached fall prevention wire to be used safely (please prepare the metal fittings separately). Note 6) In the case of direct attachment (/d), it is necessary to attach the lamp. Note 7) It is not supported for slope installation, wall mounting, or floor mounting. | 60,000 hours (at 40 ° C) (it takes time to decrease to 70%, does not guarantee the life of the product) | 130LX | Approximately 220W | 100LX | 100LX | 4mΩ between power supply and housing/500VDC | Approximately 7.7kg (mounting method: for base) Approximately 7.5kg (installation method: direct attached) | Approximately 0.2kg | Terminant resin, aluminum die cast, magnesium die cast, polycarbonate | Can be attached to existing lighting equipment without wiring work | -20 ~+50 ° C | Approximately 250W | Approximately 350W | JISC8147-2-13JISC8154 | 100-240vac (Available voltage range 90-264VAC, 47 ~ 66Hz) | 20 ~ 90%RH (not condensation) | 1500 VAC 1 minute between power supply and housing |
Other products of MGMT
View more products of MGMT