Items marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Admitted color (RA) | All light bundles (when using one light equipment) directly connected to the AC power supply | All light bundles (when using one light) Inverter | All light bundles (when using one light) Rapid | All light bundles (when using one light) glow | Beam angle | Color temperature | Compatible equipment universal compatible | Current monitoring by CPU (at the time of inverter) | Design life | Direct illuminance (when using 1m, 1 light trough equipment) Inverter | Directly connected to the power consumption AC power supply (when using one light equipment, please consider it as a guide because there are variations due to the type of stabilizer and LED elements) | Directly under illuminance (when using 1m, 1 light trough equipment) AC power supply directly | Follow -up standard | Immediately under illuminance (when using 1m, 1 light trough equipment) Glow | Immediately under illuminance (when using 1m, 1 light trough equipment) Rapid | Insulation resistance | Lower luminous bundle (when using 1 light trough equipment) Glow | Lower luminous bundle (when using 1 light trough equipment) Inverter | Lower luminous bundle (when using 1 light trough equipment) Rapid | Lower luminous bundle (when using one light trough equipment) directly connected to AC power | Material | Mounting | Operating temperature limit | Power consumption glow (when using one light equipment, please consider it as a guide because there are variations due to the type of stable and LED elements) | Power consumption inverter (When using one light equipment, please consider it as a guide because there are variations due to the type of stabilizer and LED elements) | Power consumption rapid (When using one light equipment, please consider it as a guide because there are variations due to the type of stabilizer and LED elements) | Supply power supply (when directly connected to AC power) | Tint | Used humidity range | Withstand voltage | mass |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LS600EX-U1-N |
$ 54.40〜 | 82 | 900lm | 700 ~ 1100lm | 900lm | 900lm | 130 ° | 4600 ~ 5500k | ・ 1 glow, 2 lights, 1 lapid, 2 lights, 1 inverter, 2 lights, and directly connected to AC power can be attached to 16, 20, and 30 (fluorescent light compatible format: FHF16, FL20, FLR20, FL30) Note 1) Note 1) Note 2) Depending on the shape of the socket, it may not be possible. Note 3) In the case of a two-light type, be sure to replace two at the same time because the use in combination with the direct tube LED or fluorescent light other than the LS600EX-U1 may cause failure. Note 4) It is recommended to replace equipment that exceeds the legal useful life because it causes the product to fall or fire due to deterioration. Note 5) The light emitting area does not change during expansion and contraction. | Move the output from the stabilizer in real time and turn off the lights in the event of an abnormality. If you use it in combination with the following stabilizer, the surface temperature of this product will be slightly higher than the other, so please be careful when handling it. Please use the surrounding temperature in the range of -25 ~+32 ° C. In addition, the design life is as follows, but there is no safety problem.・ FZ16198946 (16 type, 1 light inverter, Panasonic) ・ FZ16198913 (16, 1 light inverter, Panasonic) ・ FZ16298946 (16 type, 2 light inverter, Panasonic) Design life: 38,000 hours (32 ° C) | 40.000 hours (at 40 ° C) (it is time for the whole light to decrease to 70%. It does not guarantee the life of the product) | 180-280LX | 10-13W | 230LX | JISC8147-2-13JISC8154 | 230LX | 230LX | Bound pin-Aluminum frame 4mΩ or more/500VDC | 830lm | 650 ~ 1000lm | 830lm | 830lm | Polycarbonate, aluminum | Mounting on existing fluorescent lamp equipment without any need for construction 1) In the case of glow, be sure to remove the glow lamp. Note 2) In the case of an AC power supply directly, the wiring work of the fluorescent lamp is required. | -25 ~+55 ° C C | 11-13W | 11 ~ 22W | 13 ~ 15W (dimming type is 20 to 25W) | 100-240VAC50/60Hz (allowable voltage range 90-264vac) | G13 | 20 ~ 90%RH (not condensation) | Bound pin-Aluminum frame 1500VAC 1 minute | Approximately 250g | |
LS600EX-U1-W |
$ 54.40〜 | 78 | 800lm | 620 ~ 1000lm | 800lm | 800lm | 130 ° | 3800 ~ 4500k | ・ 1 glow, 2 lights, 1 lapid, 2 lights, 1 inverter, 2 lights, and directly connected to AC power can be attached to 16, 20, and 30 (fluorescent light compatible format: FHF16, FL20, FLR20, FL30) Note 1) Note 1) Note 2) Depending on the shape of the socket, it may not be possible. Note 3) In the case of a two-light type, be sure to replace two at the same time because the use in combination with the direct tube LED or fluorescent light other than the LS600EX-U1 may cause failure. Note 4) It is recommended to replace equipment that exceeds the legal useful life because it causes the product to fall or fire due to deterioration. Note 5) The light emitting area does not change during expansion and contraction. | Move the output from the stabilizer in real time and turn off the lights in the event of an abnormality. If you use it in combination with the following stabilizer, the surface temperature of this product will be slightly higher than the other, so please be careful when handling it. Please use the surrounding temperature in the range of -25 ~+32 ° C. In addition, the design life is as follows, but there is no safety problem.・ FZ16198946 (16 type, 1 light inverter, Panasonic) ・ FZ16198913 (16, 1 light inverter, Panasonic) ・ FZ16298946 (16 type, 2 light inverter, Panasonic) Design life: 38,000 hours (32 ° C) | 40.000 hours (at 40 ° C) (it is time for the whole light to decrease to 70%. It does not guarantee the life of the product) | 150 ~ 240LX | 10-13W | 200LX | JISC8147-2-13JISC8154 | 200LX | 200LX | Bound pin-Aluminum frame 4mΩ or more/500VDC | 750lm | 580 ~ 900lm | 750lm | 750lm | Polycarbonate, aluminum | Mounting on existing fluorescent lamp equipment without any need for construction 1) In the case of glow, be sure to remove the glow lamp. Note 2) In the case of an AC power supply directly, the wiring work of the fluorescent lamp is required. | -25 ~+55 ° C C | 11-13W | 11 ~ 22W | 13 ~ 15W (dimming type is 20 to 25W) | 100-240VAC50/60Hz (allowable voltage range 90-264vac) | G13 | 20 ~ 90%RH (not condensation) | Bound pin-Aluminum frame 1500VAC 1 minute | Approximately 250g | |
LS600exy-U1 |
$ 64.00〜 | 45 | 370lm | 280 ~ 450lm | 370lm | 370lm | 120 ° | 2300-2800k | ・ 1 glow, 2 lights, 1 lapid, 2 lights, 1 inverter, 2 lights, and directly connected to AC power can be attached to 16, 20, and 30 (fluorescent light compatible format: FHF16, FL20, FLR20, FL30) Note 1) Note 1) Note 2) Depending on the shape of the socket, it may not be possible. Note 3) In the case of a two-light type, be sure to replace two at the same time because the use in combination with the direct tube LED or fluorescent light other than the LS600EX-U1 may cause failure. Note 4) It is recommended to replace equipment that exceeds the legal useful life because it causes the product to fall or fire due to deterioration. Note 5) The light emitting area does not change during expansion and contraction. | Move the output from the stabilizer in real time and turn off the lights in the event of an abnormality. If you use it in combination with the following stabilizer, the surface temperature of this product will be slightly higher than the other, so please be careful when handling it. Please use the surrounding temperature in the range of -25 ~+32 ° C. In addition, the design life is as follows, but there is no safety problem.・ FZ16198946 (16 type, 1 light inverter, Panasonic) ・ FZ16198913 (16, 1 light inverter, Panasonic) ・ FZ16298946 (16 type, 2 light inverter, Panasonic) Design life: 38,000 hours (32 ° C) | 40.000 hours (at 40 ° C) (it is time for the whole light to decrease to 70%. It does not guarantee the life of the product) | 65 ~ 110LX | 10-13W | 90LX | JISC8147-2-13JISC8154 | 90LX | 90LX | Bound pin-Aluminum frame 4mΩ or more/500VDC | 340lm | 260 ~ 410lm | 340lm | 340lm | Polycarbonate, aluminum | Mounting on existing fluorescent lamp equipment without any need for construction 1) In the case of glow, be sure to remove the glow lamp. Note 2) In the case of an AC power supply directly, the wiring work of the fluorescent lamp is required. | -25 ~+55 ° C C | 11-13W | 11 ~ 22W | 13 ~ 15W (dimming type is 20 to 25W) | 100-240VAC50/60Hz (allowable voltage range 90-264vac) | G13 | 20 ~ 90%RH (not condensation) | Bound pin-Aluminum frame 1500VAC 1 minute | Approximately 250g |
Click on the part number for more information about each product