40 Type Ready Tube Ultimate LED LS1200UVC Series
MGMT
About This Product
The 40-type straight pipe ultraviolet LED (format: LS1200UVC-275-U2) is an LED that disinfects the space * 1 due to the ultraviolet light in the UVC area with a wavelength of 275 nm. Since the existing lamps (glow method/rapid method/inverter method * 2, AC power supply directly connected method [double -sided power supply]) can be installed without wiring work, it can be disinfected if it is a place where 40 -shaped lamps are installed.
* 1. In external organizations, it has confirmed that 99.9 % or more is reduced by irradiating UV rays from a certain distance to several kinds of viruses or bacteria cultured. Not all viruses and bacteria have confirmed the disinfecting effect.
* 2. Also, depending on the shape of the equipment, it may not be possible to install it. In the case of an AC power supply, the wiring work should be performed by a qualified person of an electrician (a power shock, a fire, or a failure), according to the instruction manual. The straight tube UV LED has no function for lighting.
･ Escape disinfecting due to ultraviolet rays (UVC)
･ No mounting work required (glow, lapid, inverter)
･ It can be used directly by the AC power supply by wiring work
･ Design life 20,000 hours (at 35 ° C)
･ Built -in overcurrent and over -voltage protection circuit
-
Product
40 Type Ready Tube Ultimate LED LS1200UVC Series
-
Handling Company
MGMT
-
Categories
1 Models of 40 Type Ready Tube Ultimate LED LS1200UVC Series
| Product Image | Part Number | Price (excluding tax) | Compatible equipment universal compatible | Current monitoring by CPU (at the time of inverter) | Design life | During operation lamp | Insulation resistance | Material | Mounting | Operating temperature limit | Peak wavelength | Power consumption (When using one light equipment, please consider it as a guide because there are variations due to the type of stabilizer and LED elements) | Power consumption (when using one light equipment, please consider as a guide because there are variations due to the type of stabilizer and LED elements) Glow | Power consumption (when using one light equipment, please consider it as a guide because there are variations due to stabilizer and LED elements) | Power consumption (when using one light equipment, please consider it as a guide because there are variations due to the type of stabilizer and LED elements) Inverter | Radiation (1m directly below, when using one light) Rapid | Radiation illustration (1m directly below, when using 1 light equipment) Glow | Radiation illustration (1m directly below, when using 1 light equipment) Inverter | Radiation irradiation (1m directly below, when using one light equipment) directly connected to AC power | Supply power supply (when directly connected to AC power) | Tint | Used humidity range | Withstand voltage | mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LS1200UVC-275-U2 |
$ 812.50〜 | ・ 1 glow, 2 lights, 1 lapid, 2 lights, 1 inverter, 2 lights, 2 lights, directly connected to AC power (compatible fluorescent lights: GL-40, FL40, FLR40, FHF32) Note 1) Note 2) Depending on the shape of the socket, it may not be possible. Note 3) In the case of a two-light type, two use in combination with direct tube LEDs and fluorescent lamps other than LS1200UVC-275-U2 and LS1200-U2 may cause failure, so be sure to replace two at the same time. Note 4) It is recommended to replace equipment that exceeds the legal useful life, as it causes the product drop or fire due to deterioration. | Monitor the output from the stabilizer in real time and turn off or blink in the event of an abnormality | 20,000 hours (at 35 ° C) (it takes time for radiation to decrease to 50%. It does not guarantee the life of the product) | Purple LED | Bound pin-Aluminum frame 4mΩ or more/500VDC | Aluminum, polycarbonate | Mounting on existing fluorescent lamp equipment without any need for construction 1) In the case of glow, be sure to remove the glow lamp. Note 2) In the case of an AC power supply directly, the wiring work of the fluorescent lamp is required. | -20 ~+35 ° C | 275nm (270-278nm) | 18 ~ 22W | 18 ~ 25W | 21 ~ 23W (dimming type 30-34W) | 10 ~ 30W | 2.4μW/cm2 | 2.4μW/cm2 | 0.9 ~ 2.5 μW/cm2 | 2.4μW/cm2 | 100-240vac (tolerance 90-264vac, 47 ~ 66Hz) | G13 | 20 ~ 90%RH (not condensation) | Bound pin-Aluminum frame 1500VAC 1 minute | Approximately 420g |
Customers who viewed this product also viewed
![Light emitting element 405nm UV mold type LED [ultraviolet light]-Aruwan Electronics Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006228202409292.png)
Other products of MGMT
View more products of MGMT