All Categories
History
Response Rate
100.0%
Response Time
153.2hours
Product
Motor driver TCP-S27A/TCP-S30Handling Company
TSUKASA ELECTRIC CO.,LTDCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Power supply voltage | Mass | Control circuit power consumption | Protection function: overcurrent | Protection function: overload | Storage environment | Usage environment | PWM frequency | Speed setting (rotation speed setting) | Signal output | Signal input | Protection function: power supply voltage drop | Protection function: motor restraint | Protection function: fuse protection | Protection function: Sensor abnormality | Soft start setting | Accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TCP-S27A |
Available upon quote |
24V±10% |
Approx. 30g (body only) |
1W or less |
Detects abnormal power supply current and cuts off output (automatic recovery) |
If a current exceeding the rated output current flows continuously, the output will be cut off (state maintained), reset by turning the start input "open" and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
Use in an atmosphere with thermal convection, 0~40℃, 85%RH or less (no condensation) |
Approximately 20.0KHz |
Driver internal settings: 2 systems RV1 and RV2 (switchable by speed switching input), external speed command input: 1 system |
Rotation synchronization signal output, alarm output |
Start input, rotation direction switching input, brake selection input, speed switching input, external speed command input |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
When the speed command value is 250rpm or more and the motor current is 0.5A (1A for TCP-S27A-609) or more, a stoppage of 2 seconds or more is detected and determined to be locked, the start input is "open", and the power is turned on again. Reset with |
Detects abnormal power supply current and shuts off the circuit F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the start input "open" and turning the power back on. |
Can be set to a maximum of 1.67 seconds/1000 rpm with RV3 (operates at startup and when speed command increases (D1 flashes during operation)) |
Motor connection cable (50cm) x 1, power/control signal input/output cable (50cm) x 1 |
|
|
TCP-S30 |
Available upon quote |
12~24V±10% |
50g or less |
1.5W or less |
Detects overcurrent and interrupts PWM1 cycle (self-recovery) |
Detects overload and cuts off output (Recovers by resetting and turning the power on again) |
-10~60℃, 85%RH or less (no condensation) |
Use in an atmosphere with thermal convection, 0~40℃, 85%RH or less (no condensation) |
12.5KHz |
- | - | - | - | - | - | - | - |
Motor connection cable (50cm), power/signal input/output cable x 1, instruction manual |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
