All Categories
History
Response Rate
100.0%
Response Time
153.2hours
Product
Position control type brushless motor driver TCP-P27AHandling Company
TSUKASA ELECTRIC CO.,LTDCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Power supply voltage | Current limit value (during home return operation) | Overload measurement current | Mass | Magnetic pole sensor | Maximum rotation speed | Maximum rotation command pulse (minimum pulse width) | Compatible motor | Control circuit power consumption | Resolution | Protection function: power supply voltage drop | Protection function: overcurrent | Protection function: overload | Protection function: deviation over | Protection function: motor restraint | Protection function: fuse protection | Protection function: Sensor abnormality | Storage environment | Usage environment | Pulse input method | PWM frequency | Accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TCP-P27A-609 |
Available upon quote |
DC24V±10% or less |
6.6A (0.88A) |
1,570mA or more |
Approx. 30g (body only) |
Hall element (analog voltage output) |
3,700~3,800rpm |
1,600pps MAX (200μS MIN) |
TG-609A, TG-609B, TG-609C |
1W or less |
24/rev. |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
Detects abnormal motor current and cuts off output (automatic recovery) |
If a current exceeding the rating continues to flow, the output will be cut off (state maintained) and reset by turning the “start input” “open” and turning the power on again. |
If the deviation counter value exceeds ±10,000 pulses, the output will be cut off and reset by turning the “start input” “open” and turning the power on again. |
Detects motor restraint and shuts off the output (maintains the state), detects motor stop for 2 seconds or more when the motor current is flowing over 1.0A, determines the motor to be restrained, turns ``start input'' ``open'', and restarts the power supply. Reset on input |
Detects abnormal power current and shuts off the circuit, F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the “start input” “open” and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
0~40℃, 85%RH or less (no condensation), used in an atmosphere with thermal convection |
2-pulse input method/1-pulse input method (switchable by setting RV2) |
Approximately 20.0KHz |
Motor connection cable x 1, power/control signal input/output cable x 1 |
|
|
TCP-P27A-619 |
Available upon quote |
DC24V±10% or less |
6.6A (0.88A) |
1,570mA or more |
Approx. 30g (body only) |
Hall element (analog voltage output) |
3,800rpm |
1,600pps MAX (200μS MIN) |
TG-619A |
1W or less |
24/rev. |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
Detects abnormal motor current and cuts off output (automatic recovery) |
If a current exceeding the rating continues to flow, the output will be cut off (state maintained) and reset by turning the “start input” “open” and turning the power on again. |
If the deviation counter value exceeds ±10,000 pulses, the output will be cut off and reset by turning the “start input” “open” and turning the power on again. |
Detects motor restraint and shuts off the output (maintains the state), detects motor stop for 2 seconds or more when the motor current is flowing over 1.0A, determines the motor to be restrained, turns ``start input'' ``open'', and restarts the power supply. Reset on input |
Detects abnormal power current and shuts off the circuit, F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the “start input” “open” and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
0~40℃, 85%RH or less (no condensation), used in an atmosphere with thermal convection |
2-pulse input method/1-pulse input method (switchable by setting RV2) |
Approximately 20.0KHz |
Motor connection cable x 1, power/control signal input/output cable x 1 |
|
|
TCP-P27A-22A |
Available upon quote |
DC24V±10% or less |
2.2A (0.3A) |
285mA or more |
Approx. 30g (body only) |
Hall IC (square wave output) |
4,900rpm |
1,600pps MAX (200μS MIN) |
TG-22A |
1W or less |
12/rev. |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
Detects abnormal motor current and cuts off output (automatic recovery) |
If a current exceeding the rating continues to flow, the output will be cut off (state maintained) and reset by turning the “start input” “open” and turning the power on again. |
If the deviation counter value exceeds ±10,000 pulses, the output will be cut off and reset by turning the “start input” “open” and turning the power on again. |
Detects motor restraint and shuts off the output (maintains the state), detects motor stop for 2 seconds or more when the motor current is flowing over 1.0A, determines the motor to be restrained, turns ``start input'' ``open'', and restarts the power supply. Reset on input |
Detects abnormal power current and shuts off the circuit, F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the “start input” “open” and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
0~40℃, 85%RH or less (no condensation), used in an atmosphere with thermal convection |
2-pulse input method/1-pulse input method (switchable by setting RV2) |
Approximately 20.0KHz |
Motor connection cable x 1, power/control signal input/output cable x 1 |
|
|
TCP-P27A-22D |
Available upon quote |
DC12V±10% or less |
2.2A (0.3A) |
570mA or more |
Approx. 30g (body only) |
Hall IC (square wave output) |
4,900rpm |
1,600pps MAX (200μS MIN) |
TG-22D |
1W or less |
12/rev. |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
Detects abnormal motor current and cuts off output (automatic recovery) |
If a current exceeding the rating continues to flow, the output will be cut off (state maintained) and reset by turning the “start input” “open” and turning the power on again. |
If the deviation counter value exceeds ±10,000 pulses, the output will be cut off and reset by turning the “start input” “open” and turning the power on again. |
Detects motor restraint and shuts off the output (maintains the state), detects motor stop for 2 seconds or more when the motor current is flowing over 1.0A, determines the motor to be restrained, turns ``start input'' ``open'', and restarts the power supply. Reset on input |
Detects abnormal power current and shuts off the circuit, F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the “start input” “open” and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
0~40℃, 85%RH or less (no condensation), used in an atmosphere with thermal convection |
2-pulse input method/1-pulse input method (switchable by setting RV2) |
Approximately 20.0KHz |
Motor connection cable x 1, power/control signal input/output cable x 1 |
|
|
TCP-P27A-611B |
Available upon quote |
DC24V±10% or less |
2.2A (0.3A) |
360mA or more |
Approx. 30g (body only) |
Hall IC (square wave output) |
6,900rpm |
1,600pps MAX (200μS MIN) |
TG-611B |
1W or less |
12/rev. |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
Detects abnormal motor current and cuts off output (automatic recovery) |
If a current exceeding the rating continues to flow, the output will be cut off (state maintained) and reset by turning the “start input” “open” and turning the power on again. |
If the deviation counter value exceeds ±10,000 pulses, the output will be cut off and reset by turning the “start input” “open” and turning the power on again. |
Detects motor restraint and shuts off the output (maintains the state), detects motor stop for 2 seconds or more when the motor current is flowing over 1.0A, determines the motor to be restrained, turns ``start input'' ``open'', and restarts the power supply. Reset on input |
Detects abnormal power current and shuts off the circuit, F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the “start input” “open” and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
0~40℃, 85%RH or less (no condensation), used in an atmosphere with thermal convection |
2-pulse input method/1-pulse input method (switchable by setting RV2) |
Approximately 20.0KHz |
Motor connection cable x 1, power/control signal input/output cable x 1 |
|
|
TCP-P27A-55N |
Available upon quote |
DC24V±10% or less |
3.3A (0.6A) |
620mA or more |
Approx. 30g (body only) |
Hall IC (square wave output) |
3,700rpm, 6,350rpm, 8,000rpm |
1,600pps MAX (200μS MIN) |
TG-55L, TG-55M, TG-55N |
1W or less |
12/rev. |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
Detects abnormal motor current and cuts off output (automatic recovery) |
If a current exceeding the rating continues to flow, the output will be cut off (state maintained) and reset by turning the “start input” “open” and turning the power on again. |
If the deviation counter value exceeds ±10,000 pulses, the output will be cut off and reset by turning the “start input” “open” and turning the power on again. |
Detects motor restraint and shuts off the output (maintains the state), detects motor stop for 2 seconds or more when the motor current is flowing over 1.0A, determines the motor to be restrained, turns ``start input'' ``open'', and restarts the power supply. Reset on input |
Detects abnormal power current and shuts off the circuit, F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the “start input” “open” and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
0~40℃, 85%RH or less (no condensation), used in an atmosphere with thermal convection |
2-pulse input method/1-pulse input method (switchable by setting RV2) |
Approximately 20.0KHz |
Motor connection cable x 1, power/control signal input/output cable x 1 |
|
|
TCP-P27A-55P |
Available upon quote |
DC12V±10% or less |
3.3A (0.6A) |
830mA or more |
Approx. 30g (body only) |
Hall IC (square wave output) |
3,600rpm |
1,600pps MAX (200μS MIN) |
TG-55P |
1W or less |
12/rev. |
Detects a drop in power supply voltage and cuts off the output (automatic recovery) |
Detects abnormal motor current and cuts off output (automatic recovery) |
If a current exceeding the rating continues to flow, the output will be cut off (state maintained) and reset by turning the “start input” “open” and turning the power on again. |
If the deviation counter value exceeds ±10,000 pulses, the output will be cut off and reset by turning the “start input” “open” and turning the power on again. |
Detects motor restraint and shuts off the output (maintains the state), detects motor stop for 2 seconds or more when the motor current is flowing over 1.0A, determines the motor to be restrained, turns ``start input'' ``open'', and restarts the power supply. Reset on input |
Detects abnormal power current and shuts off the circuit, F1 (5A chip fuse) |
Detects an error code in the sensor signal and shuts off the output (maintains the state), resets by turning the “start input” “open” and turning the power back on. |
-10~60℃, 85%RH or less (no condensation) |
0~40℃, 85%RH or less (no condensation), used in an atmosphere with thermal convection |
2-pulse input method/1-pulse input method (switchable by setting RV2) |
Approximately 20.0KHz |
Motor connection cable x 1, power/control signal input/output cable x 1 |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
