ISO standard spring TJB series
Tokyo Hatsujo Manufacturing Co., Ltd.
About This Product
This is our original standard based on the international standard ISO10243. We have received high praise on a global scale, especially in Europe.
ISO STANDARD springs were developed using Tohatsu's accumulated technological capabilities. Considering the overall balance such as durability and load, this is an original setting from Tohatsu.
■To use the product safely
When installing and using springs, be sure to observe the following. The display and meaning are as follows.
■Warning
If these precautions are not followed, the spring may break or fly off, resulting in serious accidents such as personal injury to workers.
■Caution
Failure to comply may result in property damage to the spring and surrounding property.
■Reference
Matters you should understand when using the product.
How to handle and use springs and precautions
■Warning
Confirmation of product standards
Before installing and using a spring, carefully check the design specifications and product standards to be installed. In particular, please note that ISO standard products and "strong springs" have completely different identification colors and spring characteristics.
Note
■Reinforcement of installation part
Because springs are made of hard steel, due to their characteristics, the parts that apply pressure and the parts that receive the spring may go into wear due to wear. If there is any inconvenience during use, please take measures such as protecting and reinforcing the installation part.
■Periodic inspection
The spring will wear out as it is used more frequently, so replace it as necessary. To prevent rust, always check and maintain the product to ensure that it is coated with an appropriate amount of anti-rust oil. In particular, please be aware that "Unpainted, LR, MR, and other springs (without rust prevention treatment specifications)" are not coated with anion electrodeposition and are susceptible to rust. .
■Storage
When storing springs, avoid high temperatures and high humidity, and store springs in a safe place where they cannot be touched by anyone other than the operator.
■Disposal
Tohatsu's standard spring series is made of low-alloy steel (silicon chrome steel for springs, piano wire, stainless steel wire for springs), so it can be disposed of as normal metal waste. Materials and paints comply with RoHS specifications.
-
Product
ISO standard spring TJB series
-
Handling Company
Tokyo Hatsujo Manufacturing Co., Ltd.
-
Categories
1 Models of ISO standard spring TJB series
| Product Image | Part Number | Price (excluding tax) | 1.5 million times Deflection (mm) | 1.5 million times Load N (kgf) | 200,000 times Load N (kgf) | 200,000 times deflection (mm) | 3 million times Load N (kgf) | 3 million times deflection (mm) | 500,000 times Load N (kgf) | 500,000 times deflection (mm) | Free length (mm) | Pore diameter (mm) | Shaft diameter (mm) | Spring constant (N/mm) | Unusable (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TJB10-25 |
Available upon quote | 5.0 (free length x 20.0%) | 184 (free length x 20.0%) | 230 (free length x 25.0%) | 6.3 (free length x 25.0%) | 156 (free length x 17.0%) | 4.3 (free length x 17.0%) | 207 (free length x 22.5%) | 5.6 (free length x 22.5%) | Twenty five | 10.0 (+0.58mm,-0mm) | 5.0 (+0mm,-0.58mm) | 36.8 | 6.8 |
Customers who viewed this product also viewed
Other products of Tokyo Hatsujo Manufacturing Co., Ltd.
View more products of Tokyo Hatsujo Manufacturing Co., Ltd.
