Magnetic distortion type open meter MSGM-10 series (magnetic distortion sensor)
Takuwa
About This Product
The location of the detector magnet that moves on the magnetic distortion line extended from the data conversion unit is measured with a magnetic distortion sensor, and the amount of movement is output with a serial signal (SSI). Read the amount of gate movement by moving the permanent magnetic detector on the magnetic distortion mounted on the gate.
The measured amount of movement is output to the dedicated open meter coder and the gate opening is calculated.
･ Directly opened from the sensor with the detector installed on the gate.
･ Because it does not use wire ropes or gears, there is no effect of stretching over time.
･ The detector does not break down because it does not require a power supply and has no electrical parts.
･ In the replace of the magnetic scale opening meter
･ It is a product registered in the Ministry of Land, Infrastructure, Transport and Tourism new technical information provision system (NETIS registration number KT-120101-A)
* The product number □□□□ is the measurement range
-
Product
Magnetic distortion type open meter MSGM-10 series (magnetic distortion sensor)
-
Handling Company
Takuwa
1 Models of Magnetic distortion type open meter MSGM-10 series (magnetic distortion sensor)
| Product Image | Part Number | Price (excluding tax) | Current consumption current | Environmental conditions around humidity | Environmental conditions peripheral temperature | Lightning circuit | Magnetic distortion length | Measurement accuracy | Measurement and decomposition ability | Measurement method | Measurement range | Operation power supply voltage | Signal output | mass | size | structure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MSGM-10N- □□□□□ |
Available upon quote | 0.14A or less | 30-90 % RH (but not condensation) | -30-50 ° C (however, use a heater if there is a possibility of freezing) | Built -in power supply / signal output | Specifying when ordering (1 to 15m: every 0.25m, excluding misfortune) | ± 1cm | 1mm | Magnetic distortion type (direct detection by magnetic distortion wire and magnet) | 0 to maximum 15m | DC24V (DC20.5 ~ 28.5V) | Serial signal (SSI) Outputs moving amount | 2.5kg or less (excluding magnetic distortion wires) | 150W x 220H x 100 Dmm (not included magnetic distortion wires, protrusions) | Data conversion room outdoor box type (drip -proof / dustproof structure) |
Other products of Takuwa
View more products of Takuwa
