All Categories

History

Carbon sulfur analyzer CS744 type series CS744/S744-CS744
Carbon sulfur analyzer CS744 type series CS744/S744-Cosmo Trading Co., Ltd.

Carbon sulfur analyzer CS744 type series CS744/S744
Cosmo Trading Co., Ltd.

Cosmo Trading Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

24.3hours

Relatively Fast Response


About This Product

■Features

It is easy to use with an easy-to-operate touch screen attached to an adjustable 6-way flexible arm. No tools are required to remove the auto cleaner.

■Analysis target

Steel, cast iron, ferroalloy, mold powder, copper alloy, aluminum alloy, catalyst, ceramics, limestone, ore, etc. The Cornerstone series will change the way you think about carbon and sulfur analysis in steel, ores, processed metals, and other inorganic materials. This device, which was created based on customer feedback and requests using our cutting-edge technology, has improved operability by taking advantage of the touch screen interface. Features and benefits

■High frequency combustion furnace

・Quick and stable combustion with 18MHz, 2.2kW high frequency furnace. ・Blowing oxygen from the lance into the crucible promotes complete combustion and improves the recovery rate. - Modular assembly allows combustion tubes to be replaced within 10 seconds.

■Improved IR cell design

- Automatic temperature adjustment function minimizes the effects of ambient temperature changes. -Long-life emitter drive and drift-free detection circuit improve long-term stability. - Carbon and sulfur detectors with wide measurement ranges are easy to set up and calibrate.

■Options

・Mounted monitor: Easy-to-operate touch screen mounted on an adjustable 6-way flexible arm. ・Cleaner: Automatic cleaner and automatic combustion tube replacement system with less downtime and improved safety. ・Performance: Carrier gas purification tubes, scrubbers, and temperature-controlled flow controllers that improve baseline stability and accuracy ・Performance Sulfur: Temperature-controlled flow controller that improves baseline stability and accuracy ・Autoloader: Shuttle loaders for 10 samples and 60 samples are available.

  • Product

    Carbon sulfur analyzer CS744 type series CS744/S744

Share this product


90+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Carbon sulfur analyzer CS744 type series CS744/S744

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power capacity Weight Reagent Sample weight Furnace Detection method Dimensions (with touch screen monitor) Operating environment Analysis accuracy Analysis scope Analysis time Processing capacity Gas used Cycle time Calibration Gas flow rate Option
Carbon sulfur analyzer CS744 type series CS744/S744-Part Number-CS744

CS744

Available upon quote

Single phase 200V~ (+10/-15%: maximum output, boosted to 230V), 50/60Hz, 30A, 5,500BTU/hr

Body weight: 140kg (with touchscreen monitor), 132kg (without touchscreen monitor)

・Magnesium perchlorate
・Sodium hydroxide (coated on an inert substrate)
・Platinum silica gel
・Rare earth based copper oxide
·cellulose

Usually 1g

High frequency furnace 2.2kw

Non-dispersive infrared absorption method

Width: 59 cm x Depth: 75 cm x Height: 84 cm

Temperature: 15℃~35℃
Relative humidity: 20%~80% (non-condensing)

Carbon: Standard deviation (s) 0.001mg or RSD0.5% *Whichever is greater
Sulfur: Standard deviation (s) 0.001mg or RSD1.5% *Whichever is greater

Carbon: 0.002mg~60mg (2ppm~6%)
Sulfur: 0.002mg~17.5mg (2ppm~1.75%)

40 seconds (typical)

27 samples/hour (typical)

Carrier: Oxygen 99.5% (0.24 MPa)
Drive: Compressed air or nitrogen (0.28 MPa; does not contain water or oil)

130 seconds (typical)

Standard sample (1 point or multiple points), automatic or manual

Carrier: 3 L/min
Drive: 1 L/min

・Mounted touch screen monitor
・Auto cleaner and automatic combustion tube replacement system
・Oxygen gas purification pipe and heated flow controller

Carbon sulfur analyzer CS744 type series CS744/S744-Part Number-S744

S744

Available upon quote

Single phase 200V~ (+10/-15%: maximum output, boosted to 230V), 50/60Hz, 30A, 5,500BTU/hr

Body weight: 140kg (with touchscreen monitor), 132kg (without touchscreen monitor)

・Magnesium perchlorate
・Sodium hydroxide (coated on an inert substrate)
・Platinum silica gel
・Rare earth based copper oxide
·cellulose

Usually 1g

High frequency furnace 2.2kw

Non-dispersive infrared absorption method

Width: 59 cm x Depth: 75 cm x Height: 84 cm

Temperature: 15℃~35℃
Relative humidity: 20%~80% (non-condensing)

Carbon: Standard deviation (s) 0.001mg or RSD0.5% *Whichever is greater
Sulfur: Standard deviation (s) 0.001mg or RSD1.5% *Whichever is greater

Carbon: 0.002mg~60mg (2ppm~6%)
Sulfur: 0.002mg~17.5mg (2ppm~1.75%)

40 seconds (typical)

27 samples/hour (typical)

Carrier: Oxygen 99.5% (0.24 MPa)
Drive: Compressed air or nitrogen (0.28 MPa; does not contain water or oil)

130 seconds (typical)

Standard sample (1 point or multiple points), automatic or manual

Carrier: 3 L/min
Drive: 1 L/min

・Mounted touch screen monitor
・Auto cleaner and automatic combustion tube replacement system
・Oxygen gas purification pipe and heated flow controller

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Elemental Analyzers Products

Other products of Cosmo Trading Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Cosmo Trading Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

24.3hrs


Company Review

4.0
  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree