Ultra-high-speed measurement of 3,600 scans/second Laser micro gauge LMG series
Tokyo Optoelectronic Industry Co., Ltd.

LMG027

AC100~240V, 50/60Hz, 30VA

85

2

4kg

Set the upper and lower limits of the decimal point.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered

D7

Set separately for left and right measurement values

0

2

±0.03

±0.3

±0.5

0.01~2

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

Select up to 2 outer diameter locations and 3 spacing locations

0.01

1 unit

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value, moving average value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

2

2

2

Measurement using external signals, calibration, offset of measured values, zero set

LMG127

AC100~240V, 50/60Hz, 30VA

226

2.5

4kg

Set the upper and lower limits of the decimal point.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered

D7

Set separately for left and right measurement values

4 (2)

12

±0.04

±0.5

±1

0.05~12

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

Select up to 2 outer diameter locations and 3 spacing locations

0.01

1 unit

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value, moving average value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

2.5

2.5

2.5

Measurement using external signals, calibration, offset of measured values, zero set

LMG307

AC100~240V, 50/60Hz, 30VA

355

2.7

4kg

Set the upper and lower limits of the decimal point.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered

D7

Set separately for left and right measurement values

10

30

±0.10

±1

±2

0.2~30

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

Select up to 2 outer diameter locations and 3 spacing locations

0

1 unit

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value, moving average value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

2.7

2.7

2.7

Measurement using external signals, calibration, offset of measured values, zero set

LMG607

AC100~240V, 50/60Hz, 30VA

707

4.8

4kg

Set the upper and lower limits of the decimal point.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered

D7

Set separately for left and right measurement values

30

60

±0.35

±2.5

±4

0.5~60

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

Select up to 2 outer diameter locations and 3 spacing locations

0.1

1 unit

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value, moving average value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

2.2

1.6

1

Measurement using external signals, calibration, offset of measured values, zero set

LMG807

AC100~240V, 50/60Hz, 30VA

990

9

4kg

Set the upper and lower limits of the decimal point.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered

D7

Set separately for left and right measurement values

40

80

±0.6

±4

±5

0.5~80

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

Select up to 2 outer diameter locations and 3 spacing locations

0.1

1 unit

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value, moving average value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

4

3

2

Measurement using external signals, calibration, offset of measured values, zero set

LMG1507

AC100~240V, 50/60Hz, 30VA

1,130

16.5

4kg

Set the upper and lower limits of the decimal point.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered

D7

Set separately for left and right measurement values

20

150

±2

±8

±12

0.7~150

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

Select up to 2 outer diameter locations and 3 spacing locations

0.1

1 unit

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value, moving average value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

7.5

4.5

4.5

Measurement using external signals, calibration, offset of measured values, zero set

LMGW2207

AC100~240V, 50/60Hz, 30VA

990

33

4kg

Set the upper and lower limits of the decimal point.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered

D7-W

Set separately for left and right measurement values

40

220

±2 (±0.6)

±12 (±4)

±15 (±5)

0.7~220

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

Select up to 2 outer diameter locations and 3 spacing locations

0.1

1 unit (for LMGW2207)

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value, moving average value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

20

16.5

6

Measurement using external signals, calibration, offset of measured values, zero set

LMG127XY

AC85~264V, 50/60Hz, 30VA

226

5

4kg

Set the upper and lower limits of the decimal point for each left and right data calculation value.

Arbitrarily set between 0.28ms and 4.4s: 5 types can be registered (moving average can also be set)

D7-XY

Set separately for left and right measurement values

6

6

±0.05

±0.5

±0.5

0.1~12

3,600

Measured values ​​from two locations can be displayed simultaneously on the left and right measured value display sections.

Up to 7 digit digital display

mm/inch switchable

In addition to 2 locations on the outer diameter and 3 locations on each of X and Y, outer diameter X-Y, average of outer diameters X and Y

0.01

LMG127XY1 unit

0~45

Visible semiconductor laser (wavelength: 655nm)

CLASS2 (IEC/JIS)

Average value, maximum value, minimum value, maximum value - minimum value

RS-232C, analog ±10V (BCD is optional)

When the error is within the tolerance range, the lamp on the display panel lights up and the alarm contact on the rear terminal block closes.

Measurement using external signals, calibration, offset of measured values, zero set