Self -absorbed absentolic slurry pump -pass through pump SMO series
Mitsuwa Pump Works
About This Product
feature
･ Special two -piece feather impeller eliminates the blockage of foreign substances and long items
･ Maximum passing particle size 2SMO-LB (MB) φ15mm, 2.5SMO-LB (MB) φ20mm, 3SMO-LB (MB) φ25mm
･ Pumps can be used in multiple purposes due to excellent self -absorption.
･ No accessory equipment such as self -absorption tank and hoot valve during operation is not required
･ Due to the double volume structure, there is a greasy separation function and is resistant to air contamination.
･ Standard adoption of no water -type double mechanical seal (oil -wrapped type)
･ Double mechanical seal is used for the shaft seal, which is the heart of the pump, to prevent liquid leakage from the axle sealed.
･ Since water is not necessary to water injection to the shaft seal, there is no excess waste liquid as well as reducing running costs.
･ Improvement of maintenance by back pullout (back pullout) method
Main use
･ Slut pulling out of agricultural village drainage treatment facility (JARUS)
･ Urine treatment plant (post -process) for sludge circulation ･ For sludge transfer
･ In general, drainage, drainage, drainage, cleaning waste, pit drainage, etc.
･ For etching drainage of the spirit factory
･ For drainage transfer of the pharmaceutical experiment building
-
Product
Self -absorbed absentolic slurry pump -pass through pump SMO series
-
Handling Company
Mitsuwa Pump Works
3 Models of Self -absorbed absentolic slurry pump -pass through pump SMO series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Drive system | Flange standard | Installation location | Material casing | Material impeller | Material mechanical seal | Material packing | Material remarks | Material shaft | Maximum passing particle size | Maximum suction 20 ° C | Maximum suction 60 ° C | Maximum suction 80 ° C | Power supply phase | Power-supply voltage | Pump structure | Structural axis | Structural axis seal | Structural impeller | Structural seal water | Transfer liquid corresponding range Activity Silk concentration | Transfer liquid corresponding range slurry concentration | Transfer liquid support liquid temperature | Transfer liquid support range viscosity | Up to 40 ° C | Up to suction 0 ° C | accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
2SMO-LB |
Available upon quote | V belt | Equivalent to JIS10K | Outdoor/indoor | FC200 | FC200 | SIC x SIC/NBR | NBR | Standard specifications | SUS316 | Φ15 m m | -5 m | -2 m | ± 0 m | Three-phase | 200V class/400V class | Self -absorbed blister -shaped non -obstructive pump | Ball shaft (grease sealed ZZ type) | Double mechanical seal | Special two wings | Oil seal (no waters) | ≦ 30,000 mg/L | ≦ 10w % | ≦ 60 ° C (inhaling operation) ≦ 80 ° C (push -in driving) | ≦ 300 mpa / s | -4 m | -5 m | Base / Safety Cover, V Brewley, V Belt |
|
|
2.5SMO-LB |
Available upon quote | V belt | Equivalent to JIS10K | Outdoor/indoor | FC200 | FC200 | SIC x SIC/NBR | NBR | Standard specifications | SUS316 | Φ20 m m | -5 m | -2 m | ± 0 m | Three-phase | 200V class/400V class | Self -absorbed blister -shaped non -obstructive pump | Ball shaft (grease sealed ZZ type) | Double mechanical seal | Special two wings | Oil seal (no waters) | ≦ 30,000 mg/L | ≦ 10w % | ≦ 60 ° C (inhaling operation) ≦ 80 ° C (push -in driving) | ≦ 300 mpa / s | -4 m | -5 m | Base / Safety Cover, V Brewley, V Belt |
|
|
3SMO-LB |
Available upon quote | V belt | Equivalent to JIS10K | Outdoor/indoor | FC200 | FC200 | SIC x SIC/NBR | NBR | Standard specifications | SUS316 | Φ25 m m | -5 m | -2 m | ± 0 m | Three-phase | 200V class/400V class | Self -absorbed blister -shaped non -obstructive pump | Ball shaft (grease sealed ZZ type) | Double mechanical seal | Special two wings | Oil seal (no waters) | ≦ 30,000 mg/L | ≦ 10w % | ≦ 60 ° C (inhaling operation) ≦ 80 ° C (push -in driving) | ≦ 300 mpa / s | -4 m | -5 m | Base / Safety Cover, V Brewley, V Belt |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Mitsuwa Pump Works
View more products of Mitsuwa Pump Works
