High efficiency permanent magnet motor (PM motor) IE4
Kyushu Kiden Co., Ltd.
About This Product
■Energy saving, CO2 emissions reduction
By replacing commercial operation of induction motors with ECOHEART (PM motor + inverter), power consumption can be reduced, and CO2 emissions and electricity costs can be reduced.
■Same installation dimensions for induction motors
Easy replacement as the mounting dimensions are the same as standard induction motors
■Features
・Ultra high efficiency [Super premium efficiency (IE4 equivalent)] Ultra high efficiency exceeding "IE4 equivalent" with a single motor
・Top Runner standard is IE3, PM motor (IE4 equivalent) is even more efficient
*Other model numbers are available.
-
Product
High efficiency permanent magnet motor (PM motor) IE4
-
Handling Company
Kyushu Kiden Co., Ltd.
-
Categories
10 Models of High efficiency permanent magnet motor (PM motor) IE4
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient environmental conditions Altitude | Ambient environmental conditions Atmosphere | Ambient environmental conditions Humidity | Ambient environmental conditions Installation location | Ambient environmental conditions Temperature | Ambient environmental conditions Vibration | Conduction method | Drive inverter | Frame number | Heat resistance class | Inverter carrier frequency | Magnetic pole position detection | Meddling method | Motor efficiency | Number of poles | Paint color | Power frequency (inverter power reception) | Power supply voltage (inverter power reception) | Protective structure | Purpose | Rated output | Rated rotation speed | Rating | Reference standard | Rotation direction | Torque characteristics Maximum torque | Torque characteristics Starting torque | Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EHM2-003718 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | WJ200 series | 112M | B | 8~15kHz | No sensor included | Terminal block (screwed) | IE4: At rated output/rotation speed | 8 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 3.7 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-005518 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | WJ200 series | 132S | B | 8~15kHz | No sensor included | Terminal block (screwed) | IE4: At rated output/rotation speed | 8 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 5.5 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-007518 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | WJ200 series | 132M | B | 8~15kHz | No sensor included | Terminal block (screwed) | IE4: At rated output/rotation speed | 8 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 7.5 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-011018 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | WJ200 series | 160M | B | 8~15kHz | No sensor included | Taking out the rug | IE4: At rated output/rotation speed | 6 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 11 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-015018 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | WJ200 series | 160L | B | 8~15kHz | No sensor included | Taking out the rug | IE4: At rated output/rotation speed | 6 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 15 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-018518 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | WJ200 series | 180M | F | 8~15kHz | No sensor included | Taking out the rug | IE4: At rated output/rotation speed | 6 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 18.5 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-022018 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | SJ series P1 | 180M | F | 6~12kHz | No sensor included | Taking out the rug | IE4: At rated output/rotation speed | 6 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | Twenty two | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-030018 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | SJ series P1 | 180L | F | 6~12kHz | No sensor included | Taking out the rug | IE4: At rated output/rotation speed | 6 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 30 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-037018 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | SJ series P1 | 200L | F | 6~12kHz | No sensor included | Taking out the rug | IE4: At rated output/rotation speed | 6 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 37 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
|
|
EHM2-045018 |
Available upon quote | Altitude below 1,000m | A place free from corrosive and explosive gases, steam, condensation, and dust. | 20~90%RH | Indoor | -10℃~40℃ (If the motor is covered with a cover, etc., the temperature inside the cover is considered the ambient temperature.) | 4.9m/s2 (0.5G) | Direct connection only | SJ series P1 | 200L | F | 6~12kHz | No sensor included | Taking out the rug | IE4: At rated output/rotation speed | 6 | Rigel Gray (Munsell 8.9Y5.1/0.3) | 50/60Hz |
200~240V, 400~480V If the voltage is outside the above range, operation at the specified output, rotational speed, and temperature rise cannot be guaranteed. |
Totally enclosed external fan type (IP44) | Reduced torque for fans, pumps, etc. | 45 | 1,800min-1 | S1 (continuous rating) | JIS C 4034 | Counterclockwise when viewed from the load side | 120% for 1 minute | 50% | Permanent magnet synchronous motor |
Click on the part number for more information about each product
Customers who viewed this product also viewed
![4 pole 100[W] ~ 750[W] model φ115-IPM-Esco Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/4000191202411131.png)
Other products of Kyushu Kiden Co., Ltd.
View more products of Kyushu Kiden Co., Ltd.
About Company Handling This Product
- Japan