Oriental motor hollow rotary actuator DGⅡ series
ORIM VEXTA
About This Product
【feature】
･ Medium -empty diameter φ28 ~ 100mm
･ Mounting angle □ 60 to 200mm
･ Holding output table
･ Ministry of ministry piping
･ High -precision positioning
･ High loading high rigidity
The DGⅡ series is an integrated product that combines hollow rotary table and hybrid control system αSTEP. The inside of the actuator is a deceleration machine structure, so high -power is possible.
The drive motor is a hybrid control system αSTEP, a stepping motor -based motor that performs proprietary control with the advantages of "open loop control" and "closed loop control". Always monitor the position of the motor and automatically switch two controls according to the situation.
The design of the design can be directly attached to the device table or arm to the design of the design. Compared to the use of mechanical parts such as belts and pulley, it can reduce the labor and cost of the mechanism design, parts arrangement, and belt tension adjustment.
In the large -diameter hollow output table, a large -diameter wiring / piping large hole hole (penetration) can be used for complicated wiring and piping, which can simplify the equipment design. High -precision positioning motor and rotating table mechanism have achieved high -precision positioning.
Used according to the space, in addition to the conventional rotating table shaft and the motor shaft (motor vertical direction), the type (motor axis) with the rotating table and the motor shaft (horizontal direction) has been upgraded. You can choose according to the installation space in the device. (Example: Installation angle dimensions 85mm standard type)
Motor's side advantage
･ Because the motor escape hole is not required, the mounting plate can be simplified.
･ Because the mounting pedestal is not required, the mounting properties are improved.
･ Cable from the legs under the table
･ Pulling of piping is possible.
Expansion of specification range by adding deceleration ratio (only in the horizontal direction of motor)
There are three types of actuators on the horizontal direction of the motor: a deceleration ratio of 12, 18, and 36. You can choose the deceleration ratio according to the required speed and the required torque.
-
Product
Oriental motor hollow rotary actuator DGⅡ series
-
Handling Company
ORIM VEXTA
-
Categories
6 Models of Oriental motor hollow rotary actuator DGⅡ series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Angle transmission system (Arcmin) | Available maxial load (n) | Available moment (N / M) | Available torque (N / M) | Backlass (Arcmin) | Electromagnetic brake | Input Power | Lost motion (Arcmin) | Medium -empty diameter (mm) | Mounting angle dimensions | Reduction ratio | Repeated positioning accuracy (Arcsec) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DGM60 |
Available upon quote | Four | 100 | 2 | 0.9 | Non -back lash | none | DC | 2 | ϕ 28 | 60mm | 18 | ± 15 |
|
|
DGM85R |
Available upon quote | Four | 500 | Ten | 1.5 | Non -back lash | None/attached | AC/DC | 2 | ϕ 33 | 85mm | 18 | ± 15 |
|
|
DGM130R |
Available upon quote | 3 | 2,000 | 50 | 12 | Non -back lash | None/attached | AC/DC | 2 | ϕ62 | 130mm | 18 | ± 15 |
|
|
DGM200R |
Available upon quote | 2 | 4,000 | 100 | 50 | Non -back lash | None/attached | AC | 2 | ϕ 100 | 200mm | 18 | ± 15 |
|
|
DGB85 |
Available upon quote | 6 | 500 | Ten | 3/4.5/9/3/4.5/9 | 6 | None/attached | AC/DC | - | ϕ 33 | 85mm | 12/18/36/12/18/36 | ± 300 |
|
|
DGB130 |
Available upon quote | 6 | 2,000 | 50 | 12/24/12/24 | 6 | None/attached | AC/DC | - | ϕ62 | 130mm | 18/36/18/36 | ± 300 |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of ORIM VEXTA
View more products of ORIM VEXTA
