All Categories

History

Soldering iron tester TM-200-TM-200
Soldering iron tester TM-200-Taiyo Electric Industry Co., Ltd.

Soldering iron tester TM-200
Taiyo Electric Industry Co., Ltd.

Taiyo Electric Industry Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

25.7hours

Relatively Fast Response


About This Product

■Multi-purpose soldering iron tester

You can measure the tip temperature, leakage voltage, and earth resistance of your soldering iron with this single device.

■Accurately measure tip temperature in just a few seconds

- Compatible with the wide temperature range required for soldering*0-700℃, with an error of ±0.5% of full scale (not including sensor error). - Because the sensor is designed to fit easily against the contact surface of the iron tip, it measures the temperature accurately in just a few seconds, regardless of the angle or shape of the iron tip. ・The sensor part can be easily replaced by the customer. *0-700℃ is the measurement range when using a probe. The measurement range when using the temperature sensor is 0-500℃.

■Comparator function

With the function that automatically determines pass/fail based on measured values, you can check whether your soldering iron meets the standards without reading the displayed value. If the measured value is within the preset upper and lower limit values, it will be judged as a pass, and a green lamp will turn on and a buzzer will sound. If it is out of range, the red lamp will light up.

■Displayed value hold function (Function as peak hold in temperature measurement.)

The display value hold function allows you to easily read measured values ​​by holding them when writing them into data sheets, etc.

■Auto zero function

When measuring leakage voltage and earth resistance, zero point errors due to circuit temperature changes and aging are reset on the internal circuit.

■ Equipped with an alarm function that notifies you when it is time to replace the sensor

This function integrates the damage value of the sensor and when it reaches a set value, a sensor alarm lamp notifies you that it is time to replace the sensor.

■Compatible with international standards, JCSS inspection and calibration

・In addition to manufacturer calibration, JCSS inspection calibration is available as an option (charged). ・JCSS calibration support: Compatible with the requirements of ISO/IEC 17025, ISO 9000s, IATF 16949, etc. - Calibration certificates with international MRA compliant JCSS certification symbols can be issued. (Regarding earth resistance measurement, it is outside the scope of JCSS certification.)

  • Product

    Soldering iron tester TM-200

Share this product


220+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Soldering iron tester TM-200

Image Part Number Price (excluding tax) Voltage accuracy Voltage resolution Weight Temperature accuracy Temperature measurement range Temperature resolution Resistance accuracy Resistance measurement range Resistance resolution Rated current Rated voltage External dimensions Operating environment Leak voltage measurement range Accessories JAN code
Soldering iron tester TM-200-Part Number-TM-200

TM-200

$ 539.50〜

± (5% of reading + 1dgt)

0–99.9mV: 0.1mV, 100–200mV: 1mV (auto range)

Approximately 1kg (excluding cord)

0–500℃→±3℃ / 501–700℃→±4℃ (excluding sensor error)

Sensor (TM-100S): 0–500℃, Probe (TM-100SP): 0–700℃

1℃

± (5% of reading + 1dgt)

0–200Ω

0–99.9Ω: 0.1Ω, 100–200Ω: 1Ω (auto range)

7A

100–240V AC 50/60Hz

185 (W) ×58 (H) ×160 (D) mm (excluding protrusions)

0–40℃, 20–85%RH (no condensation)

0–200mV (AC only) *1KHz or less

3 sensors/earth connection lead/fuse/conversion adapter/power cord

4975205450768

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Ohmmeters Products

Other products of Taiyo Electric Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Taiyo Electric Industry Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

25.7hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree