Inorganic analysis Hydrogen analyzer H836EN type
LECO Japan LLC
About This Product
■Hydrogen analyzer further evolved with innovative technology
This is the latest hydrogen analyzer with a compact design, based on the innovative technology of American LECO, and inheriting the performance that has been well-established. In the analysis of hydrogen in inorganic substances, it greatly contributes not only to research and development purposes but also to the management analysis of manufacturing processes.
■Analysis target
Steel, cast iron, ferroalloy, titanium alloy, zirconium, uranium, mold powder, copper alloy, aluminum alloy, others
Features and benefits
■Main features
・Thermal conductivity detector using new technology
・Improved detection limit and analysis accuracy compared to previous models
- Compatible with samples of various shapes. In addition, the maintenance-friendly design reduces the burden of maintenance management.
・Surface/bulk separation quantification of aluminum samples is also possible.
■Others
・Ergonomic and intuitive operation is possible with the touch panel interface attached to the flexible arm.
・Uses a Windows®-based system to achieve high operability.
■Reagent
・Magnesium perchlorate
・Reduced copper, copper turning
・Sodium hydroxide (NaOH, coated on an inert substrate)
・Oxygen water removal reagent OMI tube (optional)
・CO→CO2 oxidation reagent (Schutze reagent)
-
Product
Inorganic analysis Hydrogen analyzer H836EN type
-
Handling Company
LECO Japan LLC
-
Categories
1 Models of Inorganic analysis Hydrogen analyzer H836EN type
| Product Image | Part Number | Price (excluding tax) | Analysis accuracy | Analysis scope | Analysis time | Calibration | Cycle time | Detection method | Furnace | Gas flow rate | Gas options | Gas used | Internal cooling water | Melting furnace | Operating environment | Power capacity | Sample weight/dimensions | Size | Sound pressure level | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
H836EN |
Available upon quote | 0.000005 mg or 0.5% RSD *Whichever is greater | 0.00001 mg~0.1 mg (0.01 ppm~100 ppm @ 1 g) | Approximately 5 minutes | Reference material (single or multi-point); manual; gas dose | Approximately 7 minutes | Thermal conductivity method | Electrode furnace, current/power control, up to 7500 watts, water-cooled |
Carrier gas: 460 cm3/min Driving gas: 280 cm3/analysis |
Gas dose: Helium, nitrogen, hydrogen (99.99%), 0.14 MPa ±10% |
Carrier gas: Argon (99.999%), 0.15 MPa ±5% Driving gas: Compressed air or nitrogen, 0.28 MPa ±10% (does not contain water or oil) |
Distilled water 3.2 L | Impulse furnace (current/power control) max. 7500 W |
Temperature: 15℃ ~ 35℃ Relative humidity: 20% to 80% (non-condensing) |
Single-phase 200 V (+10/−15 %): (stepped up to 230 V for use) 60 A, 50/60 Hz, 12,500 Btu/hr‡ | Max. 5 g; depending on sample | 91 cm (H) x 71 cm (W) x 76 cm (D) (with touchscreen monitor) | 61 dBa excluding vacuum cleaner (maximum at operator position according to IEC/EN 61010-1) | Body: 186 kg (without touchscreen monitor) |
Customers who viewed this product also viewed
Other products of LECO Japan LLC
View more products of LECO Japan LLC
About Company Handling This Product
- Japan