Inorganic analysis carbon sulfur analyzer CS744 type
LECO Japan LLC
About This Product
■Features
It is easy to use with an easy-to-operate touch screen attached to an adjustable 6-way flexible arm. No tools are required to remove the auto cleaner
■Analysis target
Steel, cast iron, ferroalloy, mold powder, copper alloy, aluminum alloy, catalyst, ceramics, limestone, ore, etc.
The Cornerstone series will change the way you think about carbon and sulfur analysis in steel, ores, processed metals, and other inorganic materials. This device, which was created based on customer feedback and requests using our cutting-edge technology, has improved operability by taking advantage of the touch screen interface.
■Features and benefits
1.High frequency combustion furnace
・Quick and stable combustion with 18MHz, 2.2kW high frequency furnace.
・Blowing oxygen from the lance into the crucible promotes complete combustion and improves the recovery rate.
- Modular assembly allows combustion tubes to be replaced within 10 seconds.
2. Improved IR cell design
- Automatic temperature adjustment function minimizes the effects of ambient temperature changes.
-Long-life emitter drive and drift-free detection circuit improve long-term stability.
- Carbon and sulfur detectors with wide measurement ranges are easy to set up and calibrate.
3.Options
・Mounted monitor: Easy-to-operate touch screen mounted on an adjustable 6-way flexible arm.
・Cleaner: Automatic cleaner and automatic combustion tube replacement system with less downtime and improved safety.
・Performance: Carrier gas purification tubes, scrubbers, and temperature-controlled flow controllers that improve baseline stability and accuracy
・Performance Sulfur: Temperature-controlled flow controller that improves baseline stability and accuracy
・Autoloader: Shuttle loaders for 10 samples and 60 samples are available.
-
Product
Inorganic analysis carbon sulfur analyzer CS744 type
-
Handling Company
LECO Japan LLC
-
Categories
3 Models of Inorganic analysis carbon sulfur analyzer CS744 type
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Analysis range (sample weight 1 g) | Analysis time | Analytical accuracy (sample weight 1 g) | Calibration | Cycle time | Detection method | Dimensions (with touch screen monitor) | Furnace | Gas flow rate | Gas used | Operating environment | Power capacity | Processing capacity | Reagent | Sample weight | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CS744 |
Available upon quote |
Carbon: 0.002 mg~60 mg (2 ppm~6%) Sulfur: 0.002 mg~17.5 mg (2 ppm~1.75%) |
40 seconds (typical) |
Carbon: Standard deviation (s) 0.001 mg or RSD 0.5% *Whichever is larger Sulfur: Standard deviation (s) 0.001 mg or RSD 1.5% *Whichever is greater |
Standard sample (1 point or multiple points), automatic or manual | 130 seconds (typical) | Non-dispersive infrared absorption method | Width: 59 cm x Depth: 75 cm x Height: 84 cm | High frequency furnace 2.2 kW |
Carrier: 3 L/min Drive: 1 L/min |
Carrier: Oxygen 99.5% (0.24 MPa) Drive: Compressed air or nitrogen (0.28 MPa, free of moisture and oil) |
Temperature: 15℃~35℃ Relative humidity: 20%~80% (non-condensing) |
Single phase 200 V~ (+10/-15%: maximum output, boosted to 230 V), 50/60 Hz, 30 A, 5,500 BTU/hr | 27 samples/hour (typical) |
・Magnesium perchlorate ・Sodium hydroxide (coding on inert substrate) ・Rare earth based copper oxide ・Platinum silica gel ·cellulose |
Usually 1 g | Body weight 140 kg (with touch screen monitor) 132 kg (without touch screen monitor) |
|
|
C744 |
Available upon quote |
Carbon: 0.002 mg~60 mg (2 ppm~6%) Sulfur: 0.002 mg~17.5 mg (2 ppm~1.75%) |
40 seconds (typical) |
Carbon: Standard deviation (s) 0.001 mg or RSD 0.5% *Whichever is larger Sulfur: Standard deviation (s) 0.001 mg or RSD 1.5% *Whichever is greater |
Standard sample (1 point or multiple points), automatic or manual | 130 seconds (typical) | Non-dispersive infrared absorption method | Width: 59 cm x Depth: 75 cm x Height: 84 cm | High frequency furnace 2.2 kW |
Carrier: 3 L/min Drive: 1 L/min |
Carrier: Oxygen 99.5% (0.24 MPa) Drive: Compressed air or nitrogen (0.28 MPa, free of moisture and oil) |
Temperature: 15℃~35℃ Relative humidity: 20%~80% (non-condensing) |
Single phase 200 V~ (+10/-15%: maximum output, boosted to 230 V), 50/60 Hz, 30 A, 5,500 BTU/hr | 27 samples/hour (typical) |
・Magnesium perchlorate ・Sodium hydroxide (coding on inert substrate) ・Rare earth based copper oxide ・Platinum silica gel ·cellulose |
Usually 1 g | Body weight 140 kg (with touch screen monitor) 132 kg (without touch screen monitor) |
|
|
S744 |
Available upon quote |
Carbon: 0.002 mg~60 mg (2 ppm~6%) Sulfur: 0.002 mg~17.5 mg (2 ppm~1.75%) |
40 seconds (typical) |
Carbon: Standard deviation (s) 0.001 mg or RSD 0.5% *Whichever is larger Sulfur: Standard deviation (s) 0.001 mg or RSD 1.5% *Whichever is greater |
Standard sample (1 point or multiple points), automatic or manual | 130 seconds (typical) | Non-dispersive infrared absorption method | Width: 59 cm x Depth: 75 cm x Height: 84 cm | High frequency furnace 2.2 kW |
Carrier: 3 L/min Drive: 1 L/min |
Carrier: Oxygen 99.5% (0.24 MPa) Drive: Compressed air or nitrogen (0.28 MPa, free of moisture and oil) |
Temperature: 15℃~35℃ Relative humidity: 20%~80% (non-condensing) |
Single phase 200 V~ (+10/-15%: maximum output, boosted to 230 V), 50/60 Hz, 30 A, 5,500 BTU/hr | 27 samples/hour (typical) |
・Magnesium perchlorate ・Sodium hydroxide (coding on inert substrate) ・Rare earth based copper oxide ・Platinum silica gel ·cellulose |
Usually 1 g | Body weight 140 kg (with touch screen monitor) 132 kg (without touch screen monitor) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of LECO Japan LLC
View more products of LECO Japan LLC
About Company Handling This Product
- Japan