All Categories

History

Gear type flowmeter VCA/VCN-VCA 0.04 FF R1
Gear type flowmeter VCA/VCN-Coco Research Co., Ltd.

Gear type flowmeter VCA/VCN
Coco Research Co., Ltd.

Coco Research Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

59.6hours


About This Product

■Function

These VCA and /VCN types are flowmeters for liquids that have some degree of lubrication. The measuring section of Kracht's flowmeter is based on the operating principle of a gear motor, and consists of two gears that are rotated by the flow of fluid. Plain bearings support gears in both radial and axial directions. Gear movement is detected non-contact by a sensor installed inside the cover.

■Transfer pump

Lubricating oil supply equipment, transfer pump for dosing and mixing systems for low-pressure filling and lubrication

■Mobile

Single and multi-stage high-pressure gear pumps, hydraulic motors, and valves for construction machinery and on-vehicle machinery.

■Flow rate measurement

Gear and turbine type flow meters and indicators for volume and flow measurement technology related to hydraulics, processing, paints, etc.

■For general hydraulic industry

CETOP., directional control valves, proportional valves, hydraulic cylinders, pressure controls, stop valves, etc., general industrial hydraulic equipment for piping and slab construction (fixed and mobile)

  • Product

    Gear type flowmeter VCA/VCN

Share this product


340+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

9 Models of Gear type flowmeter VCA/VCN

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Noise level Weight Number of measurement channels Viscosity Measurement accuracy (flow range) Measuring range (l/min) Power consumption Fluid temperature Ambient temperature Installation position Output power/channel Output pulse form Output Protection class Working pressure (max.) Working voltage Volume per tooth (cm^3) Pairing Peak pressure Pulse amplitude Housing, cover Starting point (l/min) Gear Impulse
Gear type flowmeter VCA/VCN-Part Number-VCA 0.04 FF R1

VCA 0.04 FF R1

Available upon quote

LA=<60dB (A)

0.5

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±2% 20mm^2/s

0.02-4 (v=20mm^2/s)

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

200bar

UB=12...30VDC
With polarity

0.04

Ball bearing

240bar

UA≥0.8UB

Aluminum AlMgSi F30

0.004 (v=20mm^2/s)

Stainless steel 1.4462

25,000

Gear type flowmeter VCA/VCN-Part Number-VCN 0.04 FF R1

VCN 0.04 FF R1

Available upon quote

LA=<60dB (A)

1.2

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±2% 20mm^2/s

0.02-4 (v=20mm^2/s)

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

160bar

UB=12...30VDC
With polarity

0.04

Ball bearing

190bar

UA≥0.8UB

Stainless steel 1.4404

0.004 (v=20mm^2/s)

Stainless steel 1.4462

25,000

Gear type flowmeter VCA/VCN-Part Number-VCA 0.1 FE R1

VCA 0.1 FE R1

Available upon quote

LA=<60dB (A)

0.6

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±2% 20mm^2/s

0.08-10

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

200bar

UB=12...30VDC
With polarity

0.1

Ball bearing

240bar

UA≥0.8UB

Aluminum AlMgSi F30

0.008 (v=20mm^2/s)

Cast iron 1.7139

10,000

Gear type flowmeter VCA/VCN-Part Number-VCN 0.2 FA R1

VCN 0.2 FA R1

Available upon quote

LA=<60dB (A)

1.2

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±3% 20mm^2/s

0.25-10

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

160bar

UB=12...30VDC
With polarity

0.2

Plastic Plain Bearing (Iglidur X)

200bar

UA≥0.8UB

Aluminum hardening AlMgSi F30

-

Cast iron 1.7139

5,000

Gear type flowmeter VCA/VCN-Part Number-VCA 0.2 FB R1

VCA 0.2 FB R1

Available upon quote

LA=<60dB (A)

0.5

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±3% 20mm^2/s

0.25-10

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

160bar

UB=12...30VDC
With polarity

0.2

Plastic Plain Bearing (Iglidur X)

200bar

UA≥0.8UB

Aluminum hardening AlMgSi F30

-

Stainless steel 1.4462

5,000

Gear type flowmeter VCA/VCN-Part Number-VCN 0.2 FB R1

VCN 0.2 FB R1

Available upon quote

LA=<60dB (A)

0.5

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±3% 20mm^2/s

0.25-10

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

160bar

UB=12...30VDC
With polarity

0.2

Plastic Plain Bearing (Iglidur X)

200bar

UA≥0.8UB

Stainless steel 1.4404

-

Stainless steel 1.4462

5,000

Gear type flowmeter VCA/VCN-Part Number-VCA 2 FC R (P) 1

VCA 2 FC R (P) 1

Available upon quote

LA=<60dB (A)

1.9

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±2.5% 20mm^2/s

1-65

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

160bar

UB=12...30VDC
With polarity

2

Composite Plain Bearing (P10)

200bar

UA≥0.8UB

Aluminum hardening AlMgSi F30

0.12 (v=34mm^2/S
0.004 (v=100mm^2/s)

Cast iron 1.7139

50

Gear type flowmeter VCA/VCN-Part Number-VCA 2 FB R (P) 1

VCA 2 FB R (P) 1

Available upon quote

LA=<60dB (A)

1.9

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±2.5% 20mm^2/s

1-65

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

160bar

UB=12...30VDC
With polarity

2

Plastic Plain Bearing (Iglidur X)

200bar

UA≥0.8UB

Aluminum hardening AlMgSi F30

0.12 (v=34mm^2/S
0.004 (v=100mm^2/s)

Stainless steel 1.4462

500

Gear type flowmeter VCA/VCN-Part Number-VCA 05 FE R1

VCA 05 FE R1

Available upon quote

LA=<60dB (A)

6

1

Vmin=20mm^2/s
Vmax=4,000mm^2/s

±1% 20mm^2/s

1-200

Pbmax=0.6W

Θmmin=-10℃
θmmax=+80℃

Θmmin=-10℃
θmmax=+80℃

Freedom

Pamax=0.3W Short circuit prevention

Rectangular wave
Pulse duty/channel
1:1±15%

PNP (NPN:Please contact us)

IP 65 DIN 40050

80bar

UB=12...30VDC
With polarity

5.222

Ball bearing

100bar

UA≥0.8UB

Aluminum hardening AlMgSi F30

0.1 (v=20mm^2/s)

Cast iron 1.7139

191.5

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Flowmeters Products

Other products of Coco Research Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Coco Research Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

59.6hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree