All Categories

History

Pulse counter with CAN/high speed analog output-CNT-723-CAN
Pulse counter with CAN/high speed analog output-Coco Research Co., Ltd.

Pulse counter with CAN/high speed analog output
Coco Research Co., Ltd.

Coco Research Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

59.6hours


About This Product

■Measurement example

・Motor alignment ・Rotation angle of shaft ・Valve opening ・Rotation frequency and rotation angle of rotating equipment ・Cylinder travel amount/position - Winding amount of fibers, films, etc. ・Location of elevators, etc.

■CAN output

Output count value from CAN interface

■0~2MHz integration

Compatible with general pulse signals and A/B phase line driver signals up to 2MHz. Can be used in combination with a high-resolution encoder. It is also possible to measure the cumulative difference between two single-phase signal sensors.

■3 types of display

Count/length measurement, decimal point display of angle, and display of degrees, minutes, and seconds can be selected.

■Reset/Z reset

Zero reset and reset to any set value can be performed by button operation, reset signal, or EIA-574 (RS-232C). Can be reset at edges such as Z phase, with no cumulative error

■7.6μs high-speed analog output (Sat 10V/Sat 5V)

Computation speed within 3.5μs. High-speed response within 7.6μs for pulse input, isolation, calculation, DIA conversion, and analog output.

■LINEAR counter

Analog output full scale value can be set arbitrarily. Counts up to 47 bits of dirt, and can be applied to long-term durability tests.

■RING counter

Repeatedly measure between two arbitrary numbers, such as 0 and 360. Forward/reverse rotation can be determined with polarized output (10V to 5V). It can be reset at the Z phase edge and can be used as a RING counter with no cumulative error.

■MAG

Enlarged measurement of deviation from target angle. Set the center value and tolerance value, and expand the measurement between them. Ideal for detailed angle experiments.

■Key lock

Prevents incorrect operation. Safe for long-term durability tests

■EIA-574 (RS-232C) communication

Reading/resetting count values, changing settings

  • Product

    Pulse counter with CAN/high speed analog output

Share this product


150+ people viewing

Last viewed: 13 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Pulse counter with CAN/high speed analog output

Image Part Number Price (excluding tax) Setting value memory Display section General-purpose input Input withstand voltage General purpose input input combination General-purpose input Input resistance Comparator input General-purpose input Input resistance 5VCMOS input General purpose input input sensitivity General-purpose input input signal General-purpose input input connector General purpose input low pass filter General-purpose input trigger level General-purpose input AC coupling frequency characteristics Update time Response time Number of input points Input method Input frequency range Input pulse width Input indicator Phase difference overlap Input for line driver Recommended line driver Input for line driver Input withstand voltage Input for line driver Input sensitivity Input for line driver Input signal Line driver input input connector Line driver input terminator Pulse counter capacity Trigger edge Sensor power supply Count value memory
Pulse counter with CAN/high speed analog output-Part Number-CNT-723-CAN

CNT-723-CAN

Available upon quote

Non-volatile memory

16-digit x 2-line dot character LCD (LED backlighting)

50V

DC/AC

100kΩ/10kΩ
With input protection, the recomparator input
Positive input: Clamped to +12V with 1.7kΩ
Negative input: Clamped to GND with 2.5kΩ

With 5VCMOS input, input protection
Positive input: Clamped to +5V with 1.7kΩ
Negative input: Clamped to GND with 2.5kΩ

1Vp-p or more (comparator input)

Logic, zero cross (AC)

BNC connector/screwless terminal block (internal short circuit)

None / 15kHz (-3dB, -6dB/oct) /150kHz (-3dB, -6dB/oct)

Comparator input 0.00-10.00V
Signal amplitude up to 10Vp-p
5VCMOS input
H level 3.5V or more L level 1V or less

4Hz (-3dB, 6dB/oct)

3.5μs or less (4.1μs or less during Z phase processing)

7.6μs or less

1 point

Single phase signal, A/B phase signal, UP/DOWN signal

0~2MHz

150ns or more when setting 5VCMOS and line driver
Both H and L levels

TRIG'D LED Blinks when pulse is input (lit continuously with high-speed pulse)

75ns or more when set to 5VCMOS and line driver

AM26LS31 equivalent

Soil 25V (relative to GND)
25V (differential voltage)

1V or more (differential voltage)

Line driver signal

Screwless terminal block

None / 340Ω

47bit

Rising/falling

15V: 150mA maximum +12V: 120mA maximum

Electric double layer capacitor (memory time 6 hours or more)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Counters Products

Other products of Coco Research Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Coco Research Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

59.6hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree