All Categories

History

  1. Metoree
  2. Tool breakage detection system machining center type (Premium type) scanner (Tomita Co., Ltd.)
Tool breakage detection system machining center type (Premium type) scanner-TK8A
Tool breakage detection system machining center type (Premium type) scanner-TK91A
Tool breakage detection system machining center type (Premium type) scanner-Tomita Co., Ltd.

Tool breakage detection system machining center type (Premium type) scanner
Tomita Co., Ltd.

About This Product

■BK Micro

This is a product brand of SCUIBERT SYSTEM ELEKTONIK (Germany). For reliable tool breakage detection, we are particular about the contact type, and all scanners are equipped with servo motors and encoders, allowing us to handle tools with extremely small diameters. The controller also has a fieldbus connection type and is compatible with IoT. We have multiple controllers and various scanners available depending on the installed machine and the tool to be detected. Mainly divided into 1. lathe type and 2. machining center type.

■Machining center type (Premium type)

This type requires inspecting multiple tools within the ATC. To do this, the wand is inspected from the front of the tool tip. Depending on the type of controller, three types of target tools are available: 64, 512, and infinite. To set the target position, perform teaching or refer to the machine's tool table information. Inspects that the tool is within the preset tolerance from the angular position of each tool. To minimize measurement time and accommodate even the smallest diameter tools, the scanner rotates at maximum speed, decelerates 10° before the target tool position, and returns to the park position again at maximum speed after making soft contact. In addition, in order to further reduce the time required, the advance standby function and collision avoidance position setting are used to reduce the round trip time of the wand. In addition to I/O communication types that can be installed on existing machines, fieldbus (ProfiNet/Profibus/DviceNet) compatible units are also available to send and receive more complex information.

■Features

・High durability with long life of 5 million cycles (IP67) ・Detection of extremely small diameter tools from φ0.1mm ・Compact (scanner diameter φ20/φ32) ・High-speed scanning with time saving function ・Supports various machines depending on settings ・Compatible with IoT and multifunctional with fieldbus

■System configuration

The system consists of a wand, scanner, control unit and connection cable. The cable can be selected from 5/7/10/15m using a special twisted cable, and various options are also available.

  • Product

    Tool breakage detection system machining center type (Premium type) scanner

Share this product


200+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

3 Models of Tool breakage detection system machining center type (Premium type) scanner

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Maximum tool detection length
Tool breakage detection system machining center type (Premium type) scanner-Part Number-TK8A

TK8A

Available upon quote

Up to 380mm

Tool breakage detection system machining center type (Premium type) scanner-Part Number-TK98A

TK98A

Available upon quote

Up to 380mm

Tool breakage detection system machining center type (Premium type) scanner-Part Number-TK91A

TK91A

Available upon quote

Up to 700mm

Click on the part number for more information about each product

Other products of Tomita Co., Ltd.

Reviews shown here are reviews of companies.

Gate-type gantry machine 5-axis gate-type machining center FZ37-Tomita Co., Ltd.

Gate-type gantry machine 5-axis gate-type machining center FZ37

Tomita Co., Ltd.

350+ people viewing

Last viewed: 1 hour ago

Response time: 17.84 hours

5-Axis Machining Centers

6 models listed

Gate-type gantry machine 5-axis gate-type machining center FZU-Tomita Co., Ltd.

Gate-type gantry machine 5-axis gate-type machining center FZU

Tomita Co., Ltd.

370+ people viewing

Last viewed: 54 seconds ago

Response time: 17.84 hours

5-Axis Machining Centers

6 models listed

Horizontal machining center FZH-Tomita Co., Ltd.

Horizontal machining center FZH

Tomita Co., Ltd.

270+ people viewing

Last viewed: 1 hour ago

Response time: 17.84 hours

5-Axis Machining Centers

4 models listed

Wet hydraulically actuated multi-disc clutch/brake unit Series 123-Tomita Co., Ltd.

Wet hydraulically actuated multi-disc clutch/brake unit Series 123

Tomita Co., Ltd.

390+ people viewing

Response time: 17.84 hours

Hydraulic Equipment

6 models listed

Dry spring actuated hydraulic release multi-disc brake (servo brake) Series 172-Tomita Co., Ltd.

Dry spring actuated hydraulic release multi-disc brake (servo brake) Series 172

Tomita Co., Ltd.

340+ people viewing

Response time: 17.84 hours

Hydraulic Equipment

4 models listed

Linear motion lock (locking clutch) series 055-Tomita Co., Ltd.

Linear motion lock (locking clutch) series 055

Tomita Co., Ltd.

420+ people viewing

Last viewed: 3 hours ago

Response time: 17.84 hours

Hydraulic Equipment

4 models listed

Dry pneumatic actuated single disc clutch/brake unit Series 406, 420-Tomita Co., Ltd.

Dry pneumatic actuated single disc clutch/brake unit Series 406, 420

Tomita Co., Ltd.

320+ people viewing

Response time: 17.84 hours

Roller Clutches

4 models listed

Dry hydraulically actuated clutch/brake unit Series 106-Tomita Co., Ltd.

Dry hydraulically actuated clutch/brake unit Series 106

Tomita Co., Ltd.

290+ people viewing

Response time: 17.84 hours

Hydraulic Equipment

5 models listed

Linear drive unit RG type (rolling ring drive unit/traverse)-Tomita Co., Ltd.

Linear drive unit RG type (rolling ring drive unit/traverse)

Tomita Co., Ltd.

250+ people viewing

Last viewed: 11 hours ago

Response time: 17.84 hours

Transfer Machinery

3 models listed

point, line, cross laser-Tomita Co., Ltd.

point, line, cross laser

Tomita Co., Ltd.

500+ people viewing

Last viewed: 4 hours ago

Response time: 17.84 hours

Laser Light Sources

30 models listed

Laser line projector for the tire industry-Tomita Co., Ltd.

Laser line projector for the tire industry

Tomita Co., Ltd.

370+ people viewing

Last viewed: 29 minutes ago

Response time: 17.84 hours

Laser Light Sources

6 models listed

Tool breakage detection system Lathe type (Basic type)-Tomita Co., Ltd.

Tool breakage detection system Lathe type (Basic type)

Tomita Co., Ltd.

270+ people viewing

Last viewed: 35 minutes ago

Response time: 17.84 hours

5 models listed


View more products of Tomita Co., Ltd.

About Company Handling This Product

Tomita Co., Ltd.

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree