Metal 3D Printer Desktop Metal Studio System 2
BRULE INC.
About This Product
Studio System 2 is an office -friendly metal 3D printer, like the conventional Studiosystem ™, and has a simple step of printing and sintering.
With a simple two -step process that no longer needs a debinder, Studio System 2 does not require dangerous metal powder, laser, dedicated operators, special equipment, etc., and is a system that makes it easier to access all the advantages of Studio System and produces higher quality parts. I did it.
Studio System, introduced in 2016, brought high quality metal 3D prints to office environments. The conventional powder bed fusion system costs more than $ 1 million, requires a large amount of training and special facilities, and includes safety dangers such as metal powder and laser, but by introducing Studio System, engineers can easily print metal parts in the company for the first time. It became.
With the easy use of high -quality metal 3D prints, designers and engineers have been able to challenge the limits of design, and can now produce everything, from novelty jewelry, which could not be made by other methods, to the spray nozzles of liquid natural gas tanker, which greatly improved fuel efficiency.
Advantages of Studio System
・ Metal powder does not scatter
・ No dust mask is required
・ No laser
・ No third party equipment is required
・ No dedicated operator required
・ No welding support
・ No special installation environment required
An office -friendly next -generation metal 3D printer has appeared.
Studio System 2 expands the possibility of modeling and enhances the quality of the parts, and pushes the ease of printing and access to the next dimension.
The original Studio System was designed from zero to provide more easily and closer metal 3D print solutions in office environments. Studio System 2 has a complete step of step work flows by completely eliminating a degreasing treatment using solvent, and has a dramatically simple and troublesome two -step work flow. There is no need to secure a certain amount of modeling before a certain amount before the degrease and then secure the amount again before sintering. Instead, the printed object after the print is directly put into the sintered furnace, where the degreasing and sinter are performed is performed in a customized sintering cycle.
Studio System 2 processes without a solvent deflection eliminating the odor due to a degrease solvent and concerns about environmental hygiene and safety standards, and users can handle metal prints more easily. In addition, not needing a degrease solvent has the advantages of reducing consumables and related parts cost, reducing the installation area of the system, and ease of installation.
Desktop Metal engineers and material scientists have greatly improved Studio System 2 modeling quality based on thousands of print data.
Studio System 2 is characterized by the reddenes of the heat build chamber, the renewed high -resolution print head, and the improved sintered furnace, all of which have enhanced the performance that enables new two -step processes. These hardware upgrades create a synergistic effect between a completely new material system and a print / sintering profile optimized by Fabricate, greatly improving the surface quality of the support surface and a small laminate.
The shape that was difficult to form a tall, tall, thin, and complex support was now possible with new ingredients and print/sintering profiles.
Studio System 2 inherits the same philosophy as the original Studio System, and gives priority to ease of use, accessibility, and office -friendly processes while maintaining excellent modeling quality and performance. Based on this framework, Studio System 2 is equipped with additional functions that are the most office -friendly system in Desktop Metal.
This office -friendly design starts with the lack of solvent or metal powder scattering, and there is no need to add ventilation or ventilation. Studio System 2, a turn key metal 3D print solution, is very easy to install because it does not require third -party equipment or special power supply. The system is designed to fit in the office door, so you can start printing simply by installing it in the office.
-
-
Product
Metal 3D Printer Desktop Metal Studio System 2