All Categories

History

Servonut Runna Z50 Series / AXIS Control Unit AU50-ENRZ-AU50M-10
Servonut Runna Z50 Series / AXIS Control Unit AU50-ESTIC CORPORATION

Servonut Runna Z50 Series / AXIS Control Unit AU50
ESTIC CORPORATION

ESTIC CORPORATION's Response Status

Response Rate

100.0%

Response Time

15.4hours

Relatively Fast Response


About This Product

The Surboonat Lanna series is an electric nutranna for equipment. Used by incorporating it in a machine. It boasts the highest tightening accuracy among the high -precision Estic products. Always self -diagnosis before operation, whether the functions such as error detection and torque management are working properly. Two series are available: Z55 with compact design and Z50 corresponding to the wide range. The Z50 AXIS Control unit is a single -axis control unit developed exclusively for nutranna, achieving high -precision and high quality tightening with a simple configuration. Since the parameters and monitor functions required for tightening are installed as standard, it will be effective in promoting the appropriate tightening value. In addition, abnormal tightening is performed from torque, angle, time, torque judgment, etc., and effectively prevents defective products. A wide variety of tightening methods ・ Turk method, angle method torque monitor, yield method, etc. are used as standard to support various tightening Speed ​​boost function ・ Significantly improves the rotation speed of resolva tool (enrz-tu **** r-*) (140 % compared to the conventional) * ENRZ-TU150R-S and old tool unit are not applicable Compatibility correspondence of tool unit ・ The old tool unit (enrz-tu ***-*) and the encoding cable (enrz-cven-***) can be used. Memory function ・ Tightening program: 99 ・ Fighting result history: 5,115 (maximum) ・ System error history: 50 Five special functions related to tightening 1. Sizing monitor (temporary tightening monitor function) 2. Section monitor (temporary closing monitor function) 3. Self -tap monitor (self -tap function) 4. Torquate monitor (main tie torquate monitor function) 5. Back rate monitor (main tie torquate monitor function)

  • Product

    Servonut Runna Z50 Series / AXIS Control Unit AU50

Share this product


1050+ people viewing

Last viewed: 34 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

5 Models of Servonut Runna Z50 Series / AXIS Control Unit AU50

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Adaptive motor Control power supply voltage Main power supply voltage usage environment Operating temperature Humidity used Display / operation unit Control input Control output Number of programs Net port External communication port Recommended printer Control power supply capacity Main power supply capacity (when rated) When the control power is launched, the entry current value When the main power supply is launched weight
Servonut Runna Z50 Series / AXIS Control Unit AU50-Part Number-ENRZ-AU50M-10

ENRZ-AU50M-10

Available upon quote

100W

Single -phase AC200 to 230V ± 10%50/60Hz

Single -phase AC200V -230V ± 10%50/60Hz

No corrosion gas, dust, metal powder, oil mist, no explosive gas

0 to 55 ° C (no freezing)

35-90%RH (without condensation)

5 characters x 1 digit 7 segment LED display, function key (5 pieces) display lamp (OK/ALM/NG)

12 points of photo coupler isolation (DC24V pull -in current 6mA/point) * Sync (NPN, -common)/source (PNP, + common) share

Photo MOS Output 22 points (DC24VMAX.50mA/point) * Sync (NPN, -Common)/Source (PNP, + Common) share

99 program

RS-485 × 2 (maximum connection number: 31 stations)

RS-232C (9600bps-115.2kbps variable)

Serial printer EPSON: VP-700

50VA

0.4kva

Approximately 26AO-P (convergence time: about 5ms)

Approximately 23AO-P (convergence time: about 200ms)

Approximately 2.5kg

Servonut Runna Z50 Series / AXIS Control Unit AU50-Part Number-ENRZ-AU50M-20

ENRZ-AU50M-20

Available upon quote

200W

Single -phase AC200 to 230V ± 10%50/60Hz

Three -phase AC200-230V ± 10%50/60Hz

No corrosion gas, dust, metal powder, oil mist, no explosive gas

0 to 55 ° C (no freezing)

35-90%RH (without condensation)

5 characters x 1 digit 7 segment LED display, function key (5 pieces) display lamp (OK/ALM/NG)

12 points of photo coupler isolation (DC24V pull -in current 6mA/point) * Sync (NPN, -common)/source (PNP, + common) share

Photo MOS Output 22 points (DC24VMAX.50mA/point) * Sync (NPN, -Common)/Source (PNP, + Common) share

99 program

RS-485 × 2 (maximum connection number: 31 stations)

RS-232C (9600bps-115.2kbps variable)

Serial printer EPSON: VP-700

50VA

1.2kva

Approximately 26AO-P (convergence time: about 5ms)

Approximately 6AO-P (convergence time: about 400ms)

Approximately 3.2kg

Servonut Runna Z50 Series / AXIS Control Unit AU50-Part Number-ENRZ-AU50M-40

ENRZ-AU50M-40

Available upon quote

400W

Single -phase AC200 to 230V ± 10%50/60Hz

Three -phase AC200-230V ± 10%50/60Hz

No corrosion gas, dust, metal powder, oil mist, no explosive gas

0 to 55 ° C (no freezing)

35-90%RH (without condensation)

5 characters x 1 digit 7 segment LED display, function key (5 pieces) display lamp (OK/ALM/NG)

12 points of photo coupler isolation (DC24V pull -in current 6mA/point) * Sync (NPN, -common)/source (PNP, + common) share

Photo MOS Output 22 points (DC24VMAX.50mA/point) * Sync (NPN, -Common)/Source (PNP, + Common) share

99 program

RS-485 × 2 (maximum connection number: 31 stations)

RS-232C (9600bps-115.2kbps variable)

Serial printer EPSON: VP-700

50VA

1.7kva

Approximately 26AO-P (convergence time: about 5ms)

Approximately 6AO-P (convergence time: about 400ms)

Approximately 3.4kg

Servonut Runna Z50 Series / AXIS Control Unit AU50-Part Number-ENRZ-AU50M-2K

ENRZ-AU50M-2K

Available upon quote

2400W

Single -phase AC200 to 230V ± 10%50/60Hz

Three -phase AC200-230V ± 10%50/60Hz

No corrosion gas, dust, metal powder, oil mist, no explosive gas

0 to 55 ° C (no freezing)

35-90%RH (without condensation)

5 characters x 1 digit 7 segment LED display, function key (5 pieces) display lamp (OK/ALM/NG)

12 points of photo coupler isolation (DC24V pull -in current 6mA/point) * Sync (NPN, -common)/source (PNP, + common) share

Photo MOS Output 22 points (DC24VMAX.50mA/point) * Sync (NPN, -Common)/Source (PNP, + Common) share

99 program

RS-485 × 2 (maximum connection number: 31 stations)

RS-232C (9600bps-115.2kbps variable)

Serial printer EPSON: VP-700

50VA

3.8kva

Approximately 26AO-P (convergence time: about 5ms)

Approximately 6AO-P (convergence time: about 400ms)

Approximately 3.5kg

Servonut Runna Z50 Series / AXIS Control Unit AU50-Part Number-ENRZ-AU50M-5k2

ENRZ-AU50M-5k2

Available upon quote

5000W

Single -phase AC200 to 230V ± 10%50/60Hz

Three -phase AC200-230V ± 10%50/60Hz

No corrosion gas, dust, metal powder, oil mist, no explosive gas

0 to 55 ° C (no freezing)

35-90%RH (without condensation)

5 characters x 1 digit 7 segment LED display, function key (5 pieces) display lamp (OK/ALM/NG)

12 points of photo coupler isolation (DC24V pull -in current 6mA/point) * Sync (NPN, -common)/source (PNP, + common) share

Photo MOS Output 22 points (DC24VMAX.50mA/point) * Sync (NPN, -Common)/Source (PNP, + Common) share

99 program

RS-485 × 2 (maximum connection number: 31 stations)

RS-232C (9600bps-115.2kbps variable)

Serial printer EPSON: VP-700

50VA

8.0kva

Approximately 26AO-P (convergence time: about 5ms)

Approximately 6AO-P (convergence time: about 400ms)

Approximately 5.6kg

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Nut Runners Products

Other products of ESTIC CORPORATION

Reviews shown here are reviews of companies.


View more products of ESTIC CORPORATION

About Company Handling This Product

Response Rate

100.0%


Response Time

15.4hrs

Company Overview

Estic Global provides serves manufacturing and automotive industries as well as providing CAD-related machiner...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree