All Categories
History
Relatively Fast Response
Product
Optical fiber acceleration sensor newLight FS65Handling Company
Hottinger Brüel & KjærCategories
| Image | Part Number | Price (excluding tax) | Weight | Measuring range | Temperature cross sensitivity | Lateral sensitivity | Calibration factor | Maximum calibration error | Sensitivity | Flatness | Size | Natural frequency | Frequency range | Installation method | Operating temperature, storage temperature | Resolution (time-based measurement) | Resolution (frequency-based measurement) | Input/output connector | Input/output cable length | Input/output cable type | Input/output cable bending radius | Optical fiber cladding diameter/covering diameter | Protection class | Main material | Fiber type | Hand width (FWHM), reflectance, sidelobe suppression | FBG reflection wavelength |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FS65ACC |
Available upon quote |
338g (weight when cable length is 2m and there are no connectors at both ends) |
±10g |
<0.4g/℃ (Temperature cross sensitivity refers to the apparent acceleration induced by a 1℃ change in temperature) |
＜0.1% |
17g/nm (typical value, measured at 34Hz) |
±0.1g (calibrated at 35Hz, typical traceability uncertainty ±0.4g (0-pk)) |
59pm/g (typical value, measured at 34Hz) |
＜2% |
Φ53×73mm |
430Hz |
0~50Hz |
Bolted (M5) (anchors and screws not included) |
-20~+80℃ |
17mg (Resolution 1pm in wavelength measurement is the value obtained by interrogator FS22DI) |
1mg (For details on the dynamic signal technology obtained by FFT analysis using the interrogator FS22DI for wavelength measurement, please refer to the HBK FiberSensing technical note) |
FC/APC, SC/APC, NC (no connector) |
0~20m |
Φ3mm armor (Hytrel, stainless steel spiral, Kevlar®, stainless mesh, LDPE) |
>30mm (Inductive loss less than 0.05dB per turn when tested by wrapping the cable around a mandrel (cylindrical reel with a radius of 16mm or 30mm)) |
125/192μm |
IP65 (DIN EN 60529) |
Aluminum, stainless steel, ormocer® (complete sensor configuration including cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) |
SMF-28 compatible |
≤0.3nm, 21±4%, >10dB |
1,500~1,600nm (±0.5) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
