All Categories

History

Vibration transducer CCLD/IEPE acceleration pickup type 4535-B-4535-B
Vibration transducer CCLD/IEPE acceleration pickup type 4535-B-Hottinger Brüel & Kjær

Vibration transducer CCLD/IEPE acceleration pickup type 4535-B
Hottinger Brüel & Kjær

Hottinger Brüel & Kjær's Response Status

Response Rate

100.0%

Response Time

20.5hours

Relatively Fast Response


About This Product

■General-purpose 3-axis CCLD acceleration pickup, TEDS, 1MV/MS^-2

3-axis CCLD accelerometers simplify testing by covering many of the needs of modern test labs with one sensor. Cable not included. Today, the 4535-B and 4535-B-001 3-axis TEDS built-in CCLD accelerometers enable test laboratories to streamline their actual tests by meeting various demands on a single sensor. Designed. Its light weight and wide frequency range from 0.3Hz to 10kHz mean it is an excellent general purpose 3-axis accelerometer. For measurements that require only one or two axes, power can be supplied to only the axes that will be used. The TEDS function and M3 stud mounting enable quick measurement setup. ・General-purpose measurement ・Structural analysis ・Automotive body and powertrain measurement ・Acoustic fatigue test ・3-axis measurement in confined spaces ・Independent power supply for each axis, allowing effective use of channels for single-axis and 2-axis measurements ・Wide frequency range from 0.3Hz to 10kHz for all 3 axes ・Low noise level that allows structural testing - Compatible with clip attachment for quick measurement setup ・Titanium housing ・Sealed structure ・Improved test setup time with TEDS function

  • Product

    Vibration transducer CCLD/IEPE acceleration pickup type 4535-B

Share this product


210+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Vibration transducer CCLD/IEPE acceleration pickup type 4535-B

Image Part Number Price (excluding tax) Voltage sensitivity (159.2Hz, supply current 4mA) Power supply No-load supply voltage Power supply constant current Weight (excluding cables) Start-up time (final bias ±10%) Insulation resistance (ground to case) Magnetic sensitivity (50Hz, 0.038T) Temperature transient sensitivity Residual noise Structure Maximum non-destructive impact (peak) Maximum lateral sensitivity (30Hz, 100ms^-2) Sensitivity temperature count Piezoelectric sensing element Frequency range Amplitude (±10%) -2 Frequency range Amplitude (±10%) -1 Frequency range Phase (±5°) -2 Frequency range Phase (±5°) -1 Frequency range Amplitude when using Req-X (±10%) Mounting resonance frequency Operating temperature range Maximum continuous sine wave acceleration during operation (peak) Output impedance Base strain sensitivity Bias voltage Full temperature, current range Pias voltage (25℃, 4mA) Noise spectrum Sealing Case material TEDS
Vibration transducer CCLD/IEPE acceleration pickup type 4535-B-Part Number-4535-B

4535-B

Available upon quote

1.0mV/ms-2 Sat 10%, 9.8mV/g ± 10%

22~30V

2~20mA

6 grams (0.21oz)

10s

Signal ground connected to case

15ms^-2/T, 0.15g/kG

0.02ms^-2/℃, 0.0011g/℉ (lower limit frequency 3Hz (-3dB, 6dB/octave))

0.3Hz~10kHz: 9μV (900μg), 1Hz~10kHz: 5μV (500μg), 2Hz~10kHz: 4μV (400μg) (Self-noise in specified frequency range, RMS)

Share

50kms^-2 (5,100g)

<5%

PZ23

X, Y: 0.3~5,500Hz, Z: 0.3~12,800Hz (amplitude response confirmed with limited usage frequency response when installed in unplanned x and y axis plane)

X, Y: 0.3~10,000Hz, Z: 0.3~12,800Hz (Frequency when installed on the unit base (z direction is the mounting surface)

X, Y, Z: 2~5,500Hz (amplitude response confirmed with limited usage frequency response when installed in unplanned x and y axis plane)

X, Y, Z: 2~5,500Hz (Frequency when installed on the unit base (z direction is the mounting surface)

X, Y: 0.3~10,000Hz, Z: 0.3~12,800Hz (It is not recommended to apply Req-X to the x-axis or y-axis)

X, Y: 30kHz, Z: 42kHz

-60 to +125℃ (-76 to +257℉)

7,000ms^-2, 714g

50Ω

0.1ms^-2/με, 0.01g/με (at 250ps of base plane)

12~14V

13±1V

10Hz: 0.30mms^-2/√Hz (30μg/√Hz), 100Hz: 0.06mms^-2/√Hz (6μg/√Hz), 1,000Hz: 0.04mms^-2/√Hz (4μg/√Hz )

Sealed

Titanium ASTM Grade5

Built-in

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Acceleration Sensors Products

Other products of Hottinger Brüel & Kjær

Reviews shown here are reviews of companies.


View more products of Hottinger Brüel & Kjær

About Company Handling This Product

Response Rate

100.0%


Response Time

20.5hrs


Company Review

5.0

Company Overview

HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for p...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree