All Categories
History
Product
Absolute pressure transducer P8APHandling Company
Hottinger Brüel & KjærCategories
| Image | Part Number | Price (excluding tax) | Allowable temperature range | Material of the part in contact with the measured object | Shock acceleration (according to DIN IEC 68) | Accuracy class | Temperature compensation range | External material | Output characteristics Characteristic curve deviation | Output characteristics Rated sensitivity | Output characteristics Rated range of bridge applied voltage (valid value) | Output characteristics Repeatability according to DIN 1319 | Output characteristics Output resistance at 23℃ | Output characteristics Input resistance at 23℃ | Input characteristics Burst pressure | Input characteristics Rated capacity | Input characteristics Allowable vibration amplitude of dynamic load | Input characteristics Allowable pressure for dynamic load | Input characteristics Initial value | Input characteristics Test pressure | Input characteristics Self-volume including tube | Input characteristics Diaphragm damping ratio | Input characteristics Diaphragm natural frequency | Input characteristics Control part volume | Input characteristics Limit pressure at 23℃ | Input characteristics Operating range at 23°C | Protection class | Storage temperature range | Cable length, loose end | Mass including cable (approximate) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
P8AP |
Available upon quote |
-40~+80℃ (Option A5), -40~+140℃ (Option T2, T9, TH) |
Inner surface: Stainless steel 1.4542, Pressure introduction part: Stainless steel 1.4301 |
800m/s2 |
0.3 |
-10~+70℃ (Option A5), -10~+70℃ (Option T2, T9, TH) |
Stainless steel 1.4301, polyethylene |
0.30% |
2mV/V±2% |
0.5~5V/0.5~12V |
±0.1% |
330Ω (+90/-30) |
370Ω (+130/-70) /420Ω (+180/-120) |
＞200% |
10~500bar |
60~95% (based on DIN 50100) |
100% |
0bar |
175% |
1,020~1,110 (320~410) mm3 (excluding pressure introduction part) |
0.01 |
12~134kHz |
0.3~2mm3 |
175% |
0~150% |
IP67 (according to DIN 40050, IEC 68) |
-50~+85℃ (Option A5), -50~+140℃ (Option T2, T9, TH) |
5m |
250g |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
![Resin pressure sensor for extruder [for high temperature/high viscosity fluid] NP400 series (direct connection type)-Nippon Dainisco Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006736202410151.png)
![Resin pressure sensor for extruder [for high temperature/high viscosity fluid] NP400 series (remote measurement type)-Nippon Dainisco Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006736202410152.png)
![Resin pressure sensor for extruder [for high temperature/high viscosity fluid] NP400 series (with thermocouple)-Nippon Dainisco Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006736202410153.png)
![Resin pressure sensor for extruder [for high temperature/high viscosity fluid] NP400 series (small tip)-Nippon Dainisco Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006736202410154.png)
![Resin pressure sensor for extruder [for high temperature/high viscosity fluid] SPX2242 series (explosion-proof pressure transmitter)-Nippon Dainisco Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006736202410155.png)
