All Categories

History

Rotational torque sensor T210-T210
Rotational torque sensor T210-Hottinger Brüel & Kjær

Rotational torque sensor T210
Hottinger Brüel & Kjær

Hottinger Brüel & Kjær's Response Status

Response Rate

100.0%

Response Time

22.7hours

Relatively Fast Response


About This Product

■All-round torque measurement solution

Accurately obtain torque and rotational speed on the test stand. It can be used for a variety of applications within industrial environments.

■Torque measurement shaft T210: Measures rotational torque of up to 200N m

The torque sensor T210 is equipped with a precision measuring system that transfers the measured value and the supplied energy from the rotor to the stator without contact. Additionally, rotation speed and rotation angle can be measured. Output these values ​​in voltage or frequency. With these features, the T210 shaft torque sensor can be used universally. It is often used in end-of-line applications and development test benches. Finally, the round shaft end eliminates play and allows for easy integration. Due to its standardized design, the T210 can be easily installed into almost any existing plant. ・We will not keep you waiting until product delivery. Torque measuring shaft T210 is available immediately if in stock. ・1,024 pulses/rotation is also available as an option. ・Optionally can be used as a pure torque sensor without speed measurement

■Features

1. All-in-one solution ・Torque measurement range: 0.5N m to 200N m ・Measures rotation speed and rotation angle with 512 pulses per rotation ・Maximum rotation speed: max. 30,000/min ・Measure both torque and rotation speed with one sensor 2. Easy to integrate ・Compatible with old model T21WN ・Existing mounting hole pattern can be used ・Compact design ・Round shaft end allows installation without play ・No maintenance required. ・3D models (STEP files) can be used -Easy to plan, install, handle during use, and integrate 3. Superior measurement technology ・9 types of nominal torque range: 0.5; 1; 2; 5; 10; 20; 50; 100; 200N m ・Voltage and frequency output (±10V, 10kHz±5kHz) ・Linearity deviation: ≤±0.05% ・Measures bandwidth up to 1kHz ・High precision and high versatility

■Supply details

・Torque sensor T210 ・Test report ・Installation instructions

  • Product

    Rotational torque sensor T210

Share this product


180+ people viewing

Last viewed: 21 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Rotational torque sensor T210

Image Part Number Price (excluding tax) Load resistance Voltage output Load resistance Frequency output (differential) Measurement frequency range, -3dB Group delay Standard deviation of repeatability Temperature effect Effect on output signal Voltage output Temperature effect Effect on output signal Frequency output Temperature effect Effect on zero signal Voltage output Temperature effect Effect on zero signal Frequency output Residual ripple (voltage output) Calibration signal Maximum speed nmax Maximum modulation range Voltage output Maximum modulation range Frequency output Nonlinearity including hysteresis with respect to rated output Long-term drift over 48 hours at reference temperature Resolution Voltage output Resolution Frequency output Nominal (rated) Sensitivity Voltage output Nominal (rated) sensitivity Rated output tolerance Nominal (rated) Sensitivity Frequency output 10kHz Nominal (rated) output signal Voltage output Nominal (rated) output signal Frequency output Nominal (rated) torque Mnom Power supply Calibration signal trigger Power supply Nominal (rated) Power supply Output signal at torque = 0 Voltage output Output signal at torque = 0 Frequency output Size HBM accuracy grade
Rotational torque sensor T210-Part Number-T210

T210

Available upon quote

≥100kΩ

≥100Ω

1kHz

<1ms

≤±0.05% (deviation of output signal according to DIN 1319)

≤±0.1% (ratio to actual torque value distribution)

≤±0.1% (ratio to actual torque value distribution)

≤±0.1% (ratio to rated (nominal) output)

≤±0.1% (ratio to rated (nominal) output)

<100mVSS

50%vC

14,000/20,000/30,000rpm

-11.2~+11.2 (switch-on process: approx. -14) V

4.4~15.6 (switch-on process: approx. 0) kHz

≤±0.05%

Frequency output: <0.5%, voltage output: <0.5%

0.5mV

0.5 (at 10kHz) Hz

10V

≤±0.1% (deviation between actual output and rated (nominal) signal in Mnom)

5kHz

Positive nominal (rated) torque: +10V, negative nominal (rated) torque: -10V

Positive nominal (rated) torque: 15kHz, negative nominal (rated) torque: 5kHz (RS422, 5V symmetry)

0.5~200Nm

3~30V

10~30V DC (Protection Constant Voltage (SELV))

0V

10kHz

BG1/BG2/BG3

0.1

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Tachometers Products

Other products of Hottinger Brüel & Kjær

Reviews shown here are reviews of companies.


View more products of Hottinger Brüel & Kjær

About Company Handling This Product

Response Rate

100.0%


Response Time

22.7hrs


Company Review

5.0

Company Overview

HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for p...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree