All Categories

History

Dust meter Frictional electrostatic dust monitor-Integrated type PFM-M01E
Dust meter Frictional electrostatic dust monitor-Separate type sensor: PFM-M11P/Converter: PFM-KCU01
Dust meter Frictional electrostatic dust monitor-Matsushima Measure Tech Co., Ltd.

Dust meter Frictional electrostatic dust monitor
Matsushima Measure Tech Co., Ltd.

♻️ Environment & Recycling Use 🧪 Chemical Industry Use 🔩 Metal Processing Industry Use

Matsushima Measure Tech Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

63.8hours


About This Product

A dust monitor is a dust meter (dust concentration meter) that monitors dust generated from a dust collector. Continuous monitoring of small amounts of dust leaking from dust collectors 24 hours a day. Quickly detects and notifies you of the beginning of dust leakage.

■Advantages of introduction

1.24-hour monitoring ensures that even the smallest leaks are not overlooked. Realize predictive maintenance. 2. Eliminates sudden dust leaks, reducing the burden of periodic inspections. Contributes to labor saving. 3. You can use up the filter to the end. This leads to a reduction in maintenance costs.

■Features

1. 24-hour monitoring on behalf of humans, ensuring that even the smallest leaks are missed. Constant measurement (0.1 to 1,000mg/㎥) on behalf of humans. We will notify you before the dust exceeds the regulation value. The filter can be used up to the end, achieving ECO conservation. 2. Dust meter compliant with JIS standards This is an automatic dust concentration measuring device based on the performance evaluation method (JIS B7996). There is a strong correlation with the manual analysis method (JIS Z 8808) with a correlation coefficient of 0.969. You can leave it to us with confidence even when you are not performing manual analysis. 3. Industry's longest 3-year warranty Designed and produced in-house, we have sold over 6,000 units since its release. It is used in various factories with chimneys, regardless of industry, including government facilities.

■Operating principle

Attach the dust monitor to the secondary piping of the dust collector. When dust leaking into the exhaust gas comes into contact with or passes near the probe of the dust monitor, charge movement (triboelectric charge) occurs. The amount of charge movement is detected as a relative concentration that is proportional to the dust concentration, and this is output as an analog output and an alarm contact is used to notify you of an abnormality.

  • Product

    Dust meter Frictional electrostatic dust monitor
  • Usage Scenarios

    Environment & Recycling Use / Chemical Industry Use / Metal Processing Industry Use

Share this product


510+ people viewing

Last viewed: 20 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Dust meter Frictional electrostatic dust monitor

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Mass Allowable gas temperature Display Power consumption Structure Detection particle size Detection concentration range Failure alarm Installation Signal output Protective structure Power supply Upper limit alarm Probe length
Dust meter Frictional electrostatic dust monitor-Part Number-Integrated type PFM-M01E

Integrated type PFM-M01E

Available upon quote

Approximately 2.1kg

250℃ or less

Concentration: Digital 4-digit display (0.0~118.5%)

4VA

One-piece construction

>0.3μm

0.1~1,000mg/m3, 9-level range switching

1bx1

R1 screw

DC4~20mA

IP65

AC80~240V

1ax1

300~1,000mm

Dust meter Frictional electrostatic dust monitor-Part Number-Separate type sensor: PFM-M11P/Converter: PFM-KCU01

Separate type sensor: PFM-M11P/Converter: PFM-KCU01

Available upon quote

Sensor: Approx. 1.3kg
Converter: approx. 0.7kg

250℃ or less

4-digit % display

7VA

Separate structure

>0.3μm

0.1~1,000mg/m3, 9-level range switching

1cx1

R1 screw

DC4~20mA

Sensor: IP65
Converter: IP20

AC110 or 220V-15~+10%
Supply to converter

1cx2

300~1,000mm

Dust meter Frictional electrostatic dust monitor-Part Number-Separate type sensor: PFM-M11P/Converter: PFM-KCU12 (with concentration correction function)

Separate type sensor: PFM-M11P/Converter: PFM-KCU12 (with concentration correction function)

Available upon quote

Sensor: Approx. 1.3kg
Converter: approx. 0.7kg

250℃ or less

4-digit % display

7VA

Separate structure

>0.3μm

0.1~1,000mg/m3, 9-level range switching

1cx1

R1 screw

DC4~20mA

Sensor: IP65
Converter: IP20

AC110 or 220V-15~+10%
Supply to converter

1cx2

300~1,000mm

Dust meter Frictional electrostatic dust monitor-Part Number-Separate type sensor: PFM-M11P/Converter: PFM-KCU14 (with concentration correction function)

Separate type sensor: PFM-M11P/Converter: PFM-KCU14 (with concentration correction function)

Available upon quote

Sensor: Approx. 1.3kg
Converter: approx. 0.7kg

250℃ or less

4-digit mg/m3 display

7VA

Separate structure

>0.3μm

0.1~1,000mg/m3, 9-level range switching

1cx1

R1 screw

DC4~20mA

Sensor: IP65
Converter: IP20

AC110 or 220V-15~+10%
Supply to converter

1cx2

300~1,000mm

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Particle Sensors Products

Other products of Matsushima Measure Tech Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Matsushima Measure Tech Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

63.8hrs

Company Overview

Matsushima Measure Tech Co., Ltd. was founded in 1946 in Kitakyushu, Japan, as a manufacturer and solution pro...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree