All Categories

History

  1. Metoree
  2. Direct work clamp system WDP-5X Clamping module Module used as work interface (Sunk Japan Co., Ltd.)
Direct work clamp system WDP-5X Clamping module Module used as work interface-WDP-5X-DSM 99-70
Direct work clamp system WDP-5X Clamping module Module used as work interface-WDP-5X-DSM 99-70-M
Direct work clamp system WDP-5X Clamping module Module used as work interface-WDP-5X-ASM 99-70-Ø36
Direct work clamp system WDP-5X Clamping module Module used as work interface-WDP-5X-ASM 99-70-Ø36-M
Direct work clamp system WDP-5X Clamping module Module used as work interface-Sunk Japan Co., Ltd.

Direct work clamp system WDP-5X Clamping module Module used as work interface
Sunk Japan Co., Ltd.

About This Product

Clamping module or compensation module used as an interface with the workpiece. This clamping module can be operated pneumatically or manually. This correction module helps you fine-tune height differences. Advantages and Benefits

■Maximum correction height 11 mm

Tailored to each clamping task

■Scope-free pin alignment between components

High repeatability of less than 0.005 mm

■Intelligent clamp connection between stacking modules

Simple and fast operation

■High pulling power

Forces reaching up to 25 kN enable higher cutting parameters and increased production efficiency

■Built-in turbo function by default

Up to 300% increase in pulling force to maximize machine capacity and increase efficiency

■Shape-fitting, self-retaining lock

100% retraction force is maintained even if pressure drops occur

■Corrosion-resistant stainless steel construction

Long service life, highest processing reliability options, other

■WDP-5X-DSM 99-70

Pneumatic direct clamping module featuring large retracting force. The workpiece is clamped by spring force in a self-locking and form-fitting manner.

■WDP-5X-DSM 99-70-M

Manual direct clamping module featuring large retracting force. Direct clamping of the workpiece is performed by rotating the operating screw and is form-fitting and self-locking.

■WDP-5X-ASM 99-70-Ø36

A pneumatic correction module featuring a large holding force. This compensation module can freely compensate for height differences up to 11 mm. The workpiece is clamped by spring force in a self-locking and form-fitting manner.

  • Product

    Direct work clamp system WDP-5X Clamping module Module used as work interface

Share this product


310+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Direct work clamp system WDP-5X Clamping module Module used as work interface

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Height H (mm) Weight (kg) Repeat accuracy (mm) Gripping force (kN) Vertical height correction (mm) Holding force by turbo (kN) Retraction force (kN) Pulling force during turbo operation (kN) Pressure without clamp (bar)
Direct work clamp system WDP-5X Clamping module Module used as work interface-Part Number-WDP-5X-DSM 99-70

WDP-5X-DSM 99-70

Available upon quote

70

3.9

<0.005

- - -

5

18

6

Direct work clamp system WDP-5X Clamping module Module used as work interface-Part Number-WDP-5X-DSM 99-70-M

WDP-5X-DSM 99-70-M

Available upon quote

70

3.9

<0.005

- - -

15

20

-
Direct work clamp system WDP-5X Clamping module Module used as work interface-Part Number-WDP-5X-ASM 99-70-Ø36

WDP-5X-ASM 99-70-Ø36

Available upon quote

70

3

<0.1

0.8

11

4

- - -
Direct work clamp system WDP-5X Clamping module Module used as work interface-Part Number-WDP-5X-ASM 99-70-Ø36-M

WDP-5X-ASM 99-70-Ø36-M

Available upon quote

70

4

<0.1

4

11

- - - -

Click on the part number for more information about each product

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide-Sunk Japan Co., Ltd.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

1430+ people viewing

Last viewed: 5 minutes ago

Response time: 11.74 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability-Sunk Japan Co., Ltd.

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

1250+ people viewing

Last viewed: 26 minutes ago

Response time: 11.74 hours

Grippers

10 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity-Sunk Japan Co., Ltd.

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

900+ people viewing

Last viewed: 1 hour ago

Response time: 11.74 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide-Sunk Japan Co., Ltd.

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

1900+ people viewing

Last viewed: 31 minutes ago

Response time: 11.74 hours

Grippers

40 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG-Sunk Japan Co., Ltd.

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

1240+ people viewing

Last viewed: 18 minutes ago

Response time: 11.74 hours

Grippers

40 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P-Sunk Japan Co., Ltd.

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1750+ people viewing

Last viewed: 1 hour ago

Response time: 11.74 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load-Sunk Japan Co., Ltd.

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

1480+ people viewing

Last viewed: 5 hours ago

Response time: 11.74 hours

Grippers

30 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C-Sunk Japan Co., Ltd.

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

930+ people viewing

Last viewed: 24 minutes ago

Response time: 11.74 hours

Grippers

20 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA-Sunk Japan Co., Ltd.

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

810+ people viewing

Last viewed: 1 hour ago

Response time: 11.74 hours

Grippers

40 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts-Sunk Japan Co., Ltd.

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

730+ people viewing

Last viewed: 5 hours ago

Response time: 11.74 hours

Grippers

10 models listed

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide-Sunk Japan Co., Ltd.

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide

Sunk Japan Co., Ltd.

1030+ people viewing

Last viewed: 9 hours ago

Response time: 11.74 hours

Grippers

4 models listed

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers-Sunk Japan Co., Ltd.

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers

Sunk Japan Co., Ltd.

300+ people viewing

Last viewed: 19 hours ago

Response time: 11.74 hours

Grippers

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree