Wire roll machine Measurement winding and cutting machine OSTA Model SA-522/523/524/526/527
Okawa Sanki Co., Ltd.
About This Product
■Wire roll machine Measuring winding and cutting machine
・While measuring, the traverser function performs versatile winding such as aligned winding, and stops when the set length is reached.
- Cutting is performed by the cutting unit or operator.
・Measurement can be performed by inputting from a traverser with a measuring function or an external measuring device.
■Features
-You can select the model based on the size of the winding parasol or drum, and the winding weight.
・Models with a measuring function on the traverser are all-in-one measuring measuring machines.
- There is also a model that works with existing measuring machines, such as stopping at a set length using an external input signal or encoder pulse input.
・In addition to "record winding" and "aligned winding," there are also "figure-of-eight winding (winding that does not twist or tangle when taking out the wire from a figure-eight-wound bundle)" and "X (cross) winding." Various winding methods are possible, including winding (winding that allows the wire to be taken out from the center of the bundle thickness and does not get tangled).
- The winding rotation speed can be set arbitrarily, and the speed can be changed by adjusting the volume even during winding.
- By installing the optional cutter unit, it is possible to cut up to φ35.
・The main body size can be changed depending on the size of the winding drum and winding parasol.
■Model number
"Model name" D "Brim diameter" "Width" "Cutter unit presence/absence: C"
SA-524D9030C → "OSTA Model SA-524" maximum size "Brim diameter φ900mm" "Width 300mm" "With cutter unit".
-
Product
Wire roll machine Measurement winding and cutting machine OSTA Model SA-522/523/524/526/527
-
Handling Company
Okawa Sanki Co., Ltd.
-
Categories
5 Models of Wire roll machine Measurement winding and cutting machine OSTA Model SA-522/523/524/526/527
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Applicable wire outer diameter | Cutting function | External dimensions (mm) Width x Depth x Height | Geared motor Take-up shaft rotation speed | Input signal | Interface external terminal block | Maximum winding weight | Measurement correction value | Measuring function | Measuring method | Memory function | Output signal | Power supply | Setting gauge length (mm) | Take-up shaft lifting function | Take-up shaft maximum lifting weight | Take-up shaft vertical movement amount | Traverser mechanism | Traverser movement amount | Traverser pitch setting | Weight | Winding parasol Winding drum Outer diameter x width (mm) | Winding shaft diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SA-522 |
Available upon quote | Φ2~φ50mm | Cutter unit can be installed, maximum outer diameter φ35, cutting load capacity equivalent to IV60sq (optional) | 1,400×1,200×1,600 (up to display) (subject to change) | Motor: 0.75kw-1/40 reduction Rotation speed: 1~75rpm (rated 37.5rpm) (subject to change) | Emergency stop", "Pause", "Start deceleration", "Measurement complete", "Counter reset", "External encoder A, B, Z phase | USB port: Memory can be recalled using a barcode reader (memory name converted to barcode or QR code) | Standard (including the weight of the winding parasol and drum): 200kg *Subject to change depending on the maximum weight of the wire wound. | Display only ±9.999999% | None | External encoder input External contact input (deceleration/completion) | 100 items can be registered in memory | Take-up shaft is rotating automatically" "Emergency stop" "Pause" "Counter reset | Three-phase 200V 20A (subject to change) | Not specified (external encoder input) | None | - | - | Yes | Standard: 400mm *The travel distance of the traverser will change depending on the maximum width of the winding parasol and winding drum. | 0.1mm increments 0~Traverser travel amount (traverser travel amount per one rotation of the take-up shaft) | Approximately 320kg (subject to change) | Standard maximum size φ900×400 *Subject to change depending on the maximum brim diameter of the winding parasol and winding drum. | Standard: φ35mm *The winding shaft diameter will change depending on the hole diameter of the winding drum and the weight (Note 3). |
|
|
SA-523 |
Available upon quote | Φ2 ~φ35mm | Cutter unit can be installed, maximum outer diameter φ35, cutting load capacity equivalent to IV60sq (optional) | 1,400×1,200×1,600 (up to display) (subject to change) | Motor: 0.75kw-1/40 reduction Rotation speed: 1~75rpm (rated 37.5rpm) (subject to change) | Emergency stop", "Pause", "Start deceleration", "Measurement complete", "Counter reset", "External encoder A, B, Z phase | USB port: Memory can be recalled using a barcode reader (memory name converted to barcode or QR code) | Standard (including the weight of the winding parasol and drum): 200kg *Subject to change depending on the maximum weight of the wire wound. | ±9.999999% | Yes | Φ63.66mm roller encoder measuring scale (traverser part installed) | 100 items can be registered in memory | Take-up shaft is rotating automatically" "Emergency stop" "Pause" "Counter reset | Three-phase 200V 20A (subject to change) | 1~3,000,000 (3,000m) in 1mm increments | None | - | - | Yes | Standard: 300mm *The travel amount of the traverser will change depending on the maximum width of the winding parasol and winding drum. | 0.1mm increments 0~Traverser travel amount (traverser travel amount per one rotation of the take-up shaft) | Approximately 330kg (subject to change) | Standard maximum size φ900×300 *Subject to change depending on the maximum brim diameter of the winding parasol and winding drum. | Standard: φ35mm *The winding shaft diameter will change depending on the hole diameter of the winding drum and the weight (Note 3). |
|
|
SA-524 |
Available upon quote | Φ2 ~φ35mm | Cutter unit can be installed, maximum outer diameter φ35, cutting load capacity equivalent to IV60sq (optional) | 1,520×1,510×1,600 (up to display) (with changes) | Motor: 0.75kw-1/40 reduction Rotation speed: 1~75rpm (rated 37.5rpm) (subject to change) | Emergency stop", "Pause", "Start deceleration", "Measurement complete", "Counter reset", "External encoder A, B, Z phase | USB port: Memory can be recalled using a barcode reader (memory name converted to barcode or QR code) | Standard (including the weight of the winding parasol and drum): 200kg *Subject to change depending on the maximum weight of the wire wound. | ±9.999999% | Yes | Φ63.66mm roller encoder measuring scale (traverser part installed) | 100 items can be registered in memory | Take-up shaft is rotating automatically" "Emergency stop" "Pause" "Counter reset | Three-phase 200V 20A (subject to change) | 1~3,000,000 (3,000m) in 1mm increments | Yes | 400kg *Non-standard products are also available. | 520mm (Maximum ground clearance 820mm) *Subject to change depending on the diameter of the collar of the winding drum, etc. | Yes | Standard: 610mm *Traverser travel distance will change depending on the maximum width of the winding parasol and winding drum. | 0.1mm increments 0~Traverser travel amount (traverser travel amount per one rotation of the take-up shaft) | Approximately 350kg (subject to change) | Standard φ650~φ1,150×600 *Subject to change depending on the maximum brim diameter of the winding parasol and winding drum. | Standard: φ35mm *The winding shaft diameter will change depending on the hole diameter of the winding drum and the weight (Note 3). |
|
|
SA-526 |
Available upon quote | Φ2~φ45mm | Cutter unit can be installed, maximum outer diameter φ35, cutting load capacity equivalent to IV60sq (optional) | 1,675×1,810×1,650 (up to display) (with changes) | Motor: 2.2kw-1/40 reduction Rotation speed: 1~75rpm (rated 37.5rpm) (subject to change) | Emergency stop", "Pause", "Start deceleration", "Measurement complete", "Counter reset", "External encoder A, B, Z phase | USB port: Memory can be recalled using a barcode reader (memory name converted to barcode or QR code) | Standard (including the weight of the winding parasol and drum): 400kg *Subject to change depending on the maximum weight of the wire wound. | ±9.999999% | Yes | Φ95.5mm roller type encoder measuring scale (traverser part installed) | 100 items can be registered in memory | Take-up shaft is rotating automatically" "Emergency stop" "Pause" "Counter reset | Three-phase 200V 30A (subject to change) | 1~3,000,000 (3,000m) in 1mm increments | None | - | - | Yes | Standard: 770mm *Traverser travel distance will change depending on the maximum width of the winding parasol and winding drum. | 0.1mm increments 0~Traverser travel amount (traverser travel amount per one rotation of the take-up shaft) | Approximately 400kg (subject to change) | Standard maximum size φ1,250×750 *Subject to change depending on the maximum brim diameter of the winding parasol and winding drum. | Standard: φ45mm *The winding shaft diameter will change depending on the hole diameter of the winding drum and the weight (Note 3). |
|
|
SA-527 |
Available upon quote | Φ2~φ45mm Maximum width 120mm | Cutter unit can be installed, maximum outer diameter φ35, cutting load capacity equivalent to IV60sq (optional) | 1,920×1,520×1,700 (up to display) (with changes) | Motor: 2.2kw-1/40 reduction Rotation speed: 1~75rpm (rated 37.5rpm) (subject to change) | Emergency stop", "Pause", "Start deceleration", "Measurement complete", "Counter reset", "External encoder A, B, Z phase | USB port: Memory can be recalled using a barcode reader (memory name converted to barcode or QR code) | Standard (including the weight of the winding parasol and drum): 400kg *Subject to change depending on the maximum weight of the wire wound. | Display only ±9.999999% | None | External encoder input External contact input (deceleration/completion) | 100 items can be registered in memory | Take-up shaft is rotating automatically" "Emergency stop" "Pause" "Counter reset | Three-phase 200V 30A (subject to change) | Not specified (external encoder input) | Yes | 650kg *Non-standard products are also available. | 556mm (Maximum ground clearance 915mm) *Subject to change depending on the diameter of the collar of the winding drum, etc. | Yes | Standard: 630mm *Traverser travel distance will vary depending on the maximum width of the winding parasol and winding drum. | 0.1mm increments 0~Traverser travel amount (traverser travel amount per one rotation of the take-up shaft) | Approximately 450kg (subject to change) | Standard maximum size φ1,600×600 *Subject to change depending on the maximum brim diameter of the winding parasol and winding drum. | Standard: φ45mm *The winding shaft diameter will change depending on the hole diameter of the winding drum and the weight (Note 3). |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Okawa Sanki Co., Ltd.
View more products of Okawa Sanki Co., Ltd.
About Company Handling This Product
- Japan