Fully automatic winding and binding machine OSTA Model SA-500
Okawa Sanki Co., Ltd.
About This Product
■Fully automatic winding and binding machine
- Fully automatic measurement, cutting, winding, and bundling when performing cutting work, mainly from drum-wound wires.
- Length measurement is performed using an encoder, so accurate data can be obtained.
・Chucking during winding is done automatically, and winding is done by torque control.
- The wound wires are transported to the binding stage and are automatically tied in two places (with cable ties).
- Furthermore, the bundled wires are discharged into a special tray, allowing unattended operation for long periods of time.
■Handling precautions
・Please be sure to follow the precautions listed in the instruction manual (see separate page).
- Do not replace parts such as the blade type or guide pipe while the power is on.
・Do not perform work outside the specification range.
・Be sure to refuel. Also, when refueling, please clean the machine to prevent dirt from getting into it.
・Be sure to clean up after finishing work.
- When installing the machine, please install it on a flat place in an indoor environment where general work can be performed.
・Do not intentionally apply external loads such as vibrations or blows other than during normal work.
・Please check the notes regarding warranty.
-
Product
Fully automatic winding and binding machine OSTA Model SA-500
-
Handling Company
Okawa Sanki Co., Ltd.
-
Categories
1 Models of Fully automatic winding and binding machine OSTA Model SA-500
| Product Image | Part Number | Price (excluding tax) | Acceleration/deceleration time | Binding machine | Cutting length correction value | Feed rate | Length measurement accuracy | Memory function | Power supply | Size | Winding inner diameter | Wire passing height |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SA-500 |
Available upon quote | 0.2~9.9 seconds | Titon ATS3080 | -9.9999999%~±9.9999999% | 0.02~2.00M/sec | ±0.1% | Number of registrations: 5 | Three phase 200V | 300×2,200×2,600 (length x height x depth) | Φ240mm (220~350mm: by replacing the winding parasol) | 1,200mm |
Customers who viewed this product also viewed
Other products of Okawa Sanki Co., Ltd.
View more products of Okawa Sanki Co., Ltd.
About Company Handling This Product
- Japan