All Categories

History

Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm-RE45T/V (for 5V input)
Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm-Tokyo Measuring Instruments Co., Ltd.

Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm
Tokyo Measuring Instruments Co., Ltd.

Tokyo Measuring Instruments Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

21.2hours

Relatively Fast Response


About This Product

■Features

・8.5mm ultra-thin size: Thin and small (45 x 48 x 8.5), the panel surface can be used effectively and devices can be made smaller and thinner. ・A wide variety of variations: In addition to mounting directly on the printed wiring board, there are also options with a screw terminal block. The RE 45T has a wide range of output methods, including CMOS, open collector, and differential output methods. - Prevents flux from entering: The terminal part is molded into an integral structure, which prevents flux from entering during soldering. - Sealed structure: The entire encoder is sealed with an O-ring, so it can be washed completely after soldering. ・Panel waterproofing: Equipped with an O-ring for panel waterproofing as standard. ・Long life: Since it is an optical rotary encoder, no chattering occurs in the output signal. In addition, it has a long life due to non-contact detection. The click feel remains almost unchanged even after 1 million round trips. ・An ultra-thin optical rotary encoder developed for manual input of NC machine tools. ・We have taken into account the external dimensions, mounting dimensions, internal structure, etc. so that it can be used not only for machine tools but also for industrial equipment panels, as a data input method that is easy to input according to human will, or as a digital potentiometer. It is made with

■Notes

・Hand soldering is below 350℃ and within 3 seconds. ・Flow soldering is below 260℃ and within 5 seconds. ・Do not apply force to the terminals during or immediately after heating the solder. - The depth of the panel waterproofing and rotation stopper hole should be 1.8mm.

  • Product

    Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm

Share this product


470+ people viewing

Last viewed: 5 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power-supply voltage Power supply current pull -up Output voltage (when pull -up) Collector rating (at open collector) Pulse number Conveyor belt life Panel waterproofness Operating temperature limit Save temperature range Collector rating (for open collector) Panel waterproof Number of pulses Operating temperature range Storage temperature range Output format Output voltage (when pulled up) Rotation torque Rotational life Product weight Power supply voltage Power supply current open collector Power supply current pull-up
Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm-Part Number-RE45T/V (for 5V input)

RE45T/V (for 5V input)

Available upon quote

DC5V ± 10%

80mA or less

1 Level: (Power supply voltage -0.5V) or more
0 Level: 0.4V or less (when no load)

DC30V or less, 50mA or less

100 pulse/100 clicks or 25 pulse/100 clicks

More than 1 million round trips

Format D: 2m to a depth of 2m (non -rotating)

-10 ℃ ~ 60 ° C (not freezing)

-40 ℃ ~ 85 ℃ (not freezing)

DC30V or less, 50mA or less

Type D: 2 hours in water depth 2m (when not rotating)

100 pulses/100 clicks or 25 pulses/100 clicks

-10℃~60℃ (no freezing)

-40℃~85℃ (no freezing)

330Ω pull-up or open collector

1 level: (power supply voltage -0.5V) or more
0 level: 0.4V or less (at no load)

Shape A, C: 8~16mN・m (80~160gf・cm)
Shape D: 32~64mN・m (320~640gf・cm)

More than 1 million round trips

Shape A: Approx. 125g
Shape D: Approx. 80g

DC5V±10%

30mA or less

80mA or less

Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm-Part Number-RE45T (for 12V input)

RE45T (for 12V input)

Available upon quote

DC12V ± 10%

60ma or less

1 Level: (Power supply voltage -0.5V) or more
0 Level: 0.4V or less (when no load)

DC30V or less, 50mA or less

100 pulse/100 clicks or 25 pulse/100 clicks

More than 1 million round trips

Format D: 2m to a depth of 2m (non -rotating)

-10 ℃ ~ 60 ° C (not freezing)

-40 ℃ ~ 85 ℃ (not freezing)

DC30V or less, 50mA or less

Type D: 2 hours in water depth 2m (when not rotating)

100 pulses/100 clicks or 25 pulses/100 clicks

-10℃~60℃ (no freezing)

-40℃~85℃ (no freezing)

22Ω pull-up or open collector

1 level: (power supply voltage -0.5V) or more
0 level: 0.4V or less (at no load)

Shape A, C: 8~16mN・m (80~160gf・cm)
Shape D: 32~64mN・m (320~640gf・cm)

More than 1 million round trips

Shape A: Approx. 125g
Shape D: Approx. 80g

DC12V±10%

40mA or less

60mA or less

Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm-Part Number-RE45T (for differential output)

RE45T (for differential output)

Available upon quote

DC5V ± 10%

150ma or less

-

DC30V or less, 50mA or less

100 pulse/100 clicks or 25 pulse/100 clicks

More than 1 million round trips

Format D: 2m to a depth of 2m (non -rotating)

-10 ℃ ~ 60 ° C (not freezing)

-40 ℃ ~ 85 ℃ (not freezing)

DC30V or less, 50mA or less

Type D: 2 hours in water depth 2m (when not rotating)

100 pulses/100 clicks or 25 pulses/100 clicks

-10℃~60℃ (no freezing)

-40℃~85℃ (no freezing)

RSS422 compliant (line driver) terminating resistance on the receiving side is 100Ω for each phase

-

Shape A, C: 8~16mN・m (80~160gf・cm)
Shape D: 32~64mN・m (320~640gf・cm)

More than 1 million round trips

Shape A: Approx. 125g
Shape D: Approx. 80g

DC5V±10%

(90mAtyp)

150mA or less

Ultra-slim, sealed structure manual pulse generator RE45T/V series with a depth of 8.5mm-Part Number-RE45T (for photocoupler)

RE45T (for photocoupler)

Available upon quote

DC10.8V ~ 26.4V (12V ~ 24V)

-

1 Level: TR is on
0 Level: TR is OFF

DC30V or less, 50mA or less

100 pulse/100 clicks or 25 pulse/100 clicks

More than 1 million round trips

Format D: 2m to a depth of 2m (non -rotating)

-10 ℃ ~ 60 ° C (not freezing)

-40 ℃ ~ 85 ℃ (not freezing)

DC30V or less, 50mA or less

Type D: 2 hours in water depth 2m (when not rotating)

100 pulses/100 clicks or 25 pulses/100 clicks

-10℃~60℃ (no freezing)

-40℃~85℃ (no freezing)

Open collector (current output type)

Level 1: TR is ON
0 level: TR is OFF

Shape A, C: 8~16mN・m (80~160gf・cm)
Shape D: 32~64mN・m (320~640gf・cm)

More than 1 million round trips

Shape A: Approx. 125g
Shape D: Approx. 80g

DC10.8V~26.4V (12V~24V)

60mA

-

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Encoders Products

Other products of Tokyo Measuring Instruments Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Measuring Instruments Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

21.2hrs


Company Review

5.0
  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree