All Categories

History

Low -frequency pulse type standard type TRC series-TRC-250A
Low -frequency pulse type standard type TRC series-TRC-250B
Low -frequency pulse type standard type TRC series-TRC-70A
Low -frequency pulse type standard type TRC series-TRC-70B
Low -frequency pulse type standard type TRC series-SANKO ELECTRONIC LABORATORY CO.,LTD

Low -frequency pulse type standard type TRC series
SANKO ELECTRONIC LABORATORY CO.,LTD

SANKO ELECTRONIC LABORATORY CO.,LTD's Response Status

Response Rate

100.0%

Response Time

12.5hours

Relatively Fast Response


About This Product

The TRC series offers four models.

■ Features

1. Low frequency pulse discharge type ・ Painted film / lining membrane is not used due to low frequency pulse discharge and low flowing output. ・ High detection rate is high. ・ Indirect ground is possible. The ground can be removed even in the case of the entire surface. 2. Voltage variable type ・ It can be inspected with appropriate detection voltage according to the nature, thickness, and detection of the painted film. ・ Always display the detector on the meter. Prevents test mistakes due to excess voltage and shortage. 3. Easy operation and safety design ・ The operation is to apply the probe electrodes to the subject inspection. Informs the presence or absence of a pinhole with a lamp or buzzer. ・ Low current high -voltage output circuit and safety remote switch considering the safety of operation. ・ Stable output voltage due to transistor oscillation circuit. ・ It is easy to carry to the site with a small and lightweight body.

■ Use

・ Underwater -buried tubes such as water and sewage, gas, and electricity ・ Lining membrane that requires chemical resistance such as chemical plants, tanks, pipes, and valves ・ Water / ship equipment, coast -prevention painting, lining of coasts and underwater equipment ・ Special pollution gas such as pollution equipment equipment, corrosion -resistant painting lining for pollution ・ Rust -prevention / anti -adhesive painting, lining for buildings, buildings, and machinery, which are easily exposed to various pollutants ・ Enforced baths, resin coating buses, hot spring resorts, and devices for equipment ・ Painting and lining of a large large -scale, high -painted cost ・ Prevention painting and lining of important parts such as precision equipment and electrical equipment

  • Product

    Low -frequency pulse type standard type TRC series

Share this product


380+ people viewing

Last viewed: 18 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Low -frequency pulse type standard type TRC series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Operating temperature Target coating thickness size weight Detector voltage Prove (standard attached) Charging power supply Standard accessories Alarm system method power supply Operating time
Low -frequency pulse type standard type TRC series-Part Number-TRC-250A

TRC-250A

Available upon quote

0 to 40 ° C (not condensation)

1mm or more

370 (W) x190 (H) x150 (d) mm

4.9kg

5 to 25kV (high wave value)

ABS extension probe (handle portion φ32, head part φ25, length: minimum about 540mm ~ maximum maximum 870mm), with brush holder, code (5m for high pressure)

AC100 ~ 240V, 50/60Hz, 30 ~ 20VA

Earth code 5m, probe storage case, safety switch code: 5m, power cord: 2m, flat brush electrodes (30 x 300mm, brass) x 2 bottles, a set of about 2.2 kg

lamp

Low -frequency high voltage pulse discharge type

Built -in NIMH (nickel hydrogen) battery (with battery check function)

About 6 hours (at maximum output voltage)

Low -frequency pulse type standard type TRC series-Part Number-TRC-250B

TRC-250B

Available upon quote

0 to 40 ° C (not condensation)

1mm or more

370 (W) x190 (H) x150 (d) mm

4.9kg

5 to 25kV (high wave value)

ABS extension probe (handle portion φ32, head part φ25, length: minimum about 540mm ~ maximum maximum 870mm), with brush holder, code (5m for high pressure)

AC100 ~ 240V, 50/60Hz, 30 ~ 20VA

Earth code 5m, probe storage case, safety switch code: 5m, power cord: 2m, flat brush electrodes (30 x 300mm, brass) x 2 bottles, a set of about 2.2 kg

Lamp, buzzer

Low -frequency high voltage pulse discharge type

Built -in NIMH (nickel hydrogen) battery (with battery check function)

About 6 hours (at maximum output voltage)

Low -frequency pulse type standard type TRC series-Part Number-TRC-70A

TRC-70A

Available upon quote

0 to 40 ° C (not condensation)

1mm or less

370 (W) x190 (H) x150 (d) mm

3.9kg

1 ~ 7kV (high wave value)

ABS extension probe (handle portion φ32, head part φ25, length: minimum about 540mm ~ maximum maximum 870mm), with brush holder, code (5m for high pressure)

AC100 ~ 240V, 50/60Hz, 30 ~ 20VA

Earth code 5m, probe storage case, safety switch code: 5m, power cord: 2m, flat brush electrodes (30 x 300mm, brass) x 2 bottles, a set of about 2.2 kg

lamp

Low -frequency high voltage pulse discharge type

Built -in NIMH (nickel hydrogen) battery (with battery check function)

About 10.5 hours (maximum output voltage)

Low -frequency pulse type standard type TRC series-Part Number-TRC-70B

TRC-70B

Available upon quote

0 to 40 ° C (not condensation)

1mm or less

370 (W) x190 (H) x150 (d) mm

3.9kg

1 ~ 7kV (high wave value)

ABS extension probe (handle portion φ32, head part φ25, length: minimum about 540mm ~ maximum maximum 870mm), with brush holder, code (5m for high pressure)

AC100 ~ 240V, 50/60Hz, 30 ~ 20VA

Earth code 5m, probe storage case, safety switch code: 5m, power cord: 2m, flat brush electrodes (30 x 300mm, brass) x 2 bottles, a set of about 2.2 kg

Lamp, buzzer

Low -frequency high voltage pulse discharge type

Built -in NIMH (nickel hydrogen) battery (with battery check function)

About 10.5 hours (maximum output voltage)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Pinhole Detectors Products

Other products of SANKO ELECTRONIC LABORATORY CO.,LTD

Reviews shown here are reviews of companies.


View more products of SANKO ELECTRONIC LABORATORY CO.,LTD

About Company Handling This Product

Response Rate

100.0%


Response Time

12.5hrs

Company Overview

SANKO ELECTRONIC LABORATORY CO.,LTD, established on August 1, 1963, and based in Kawasaki, Kanagawa, is a manu...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree