All Categories
History
Response Rate
100.0%
Response Time
28.7hours
Relatively Fast Response
Product
Grab Spring D Series Compressed Coil Spring (5001-5850) with necessary characteristicsHandling Company
Komatsuzaki Co., Ltd.Categories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Win diameter mm | Maximum load mm | Outer diameter MM | Maximum load height mm | Freedom MM | Spring constant N/mm | Total number of volumes | Number in packs | Use temperature limit | Maximum load N | Outer diameter | Winding direction | Freedom | Quotor | Adhesion height | Low -temperature grilled dull | Endorsement |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
5001 |
Available upon quote |
0.1 |
0.371 |
0.6 |
0.8 |
1 |
2.0482 |
5.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5002 |
Available upon quote |
0.1 |
0.371 |
0.6 |
1.1 |
1.4 |
1.3034 |
7.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5003 |
Available upon quote |
0.1 |
0.371 |
0.6 |
1.6 |
2 |
0.8428 |
10.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5004 |
Available upon quote |
0.1 |
0.371 |
0.6 |
2 |
2.7 |
0.5684 |
14.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5005 |
Available upon quote |
0.1 |
0.371 |
0.6 |
2.9 |
3.9 |
0.3822 |
20.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5006 |
Available upon quote |
0.1 |
0.311 |
0.73 |
0.9 |
1.2 |
1.0192 |
5.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5007 |
Available upon quote |
0.1 |
0.311 |
0.73 |
1.2 |
1.7 |
0.6468 |
7.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5008 |
Available upon quote |
0.1 |
0.311 |
0.73 |
1.7 |
2.4 |
0.4214 |
10.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5009 |
Available upon quote |
0.1 |
0.311 |
0.73 |
2.3 |
3.4 |
0.2842 |
14.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
|
|
5010 |
Available upon quote |
0.1 |
0.311 |
0.73 |
3.3 |
4.9 |
0.196 |
20.5 |
20 |
-30 ℃ ~+80 ° C (SWP), -30 ° C ~+200 ° C (SUS304) |
± 10 % (but limited to 4mm or more) |
JIS B2704-2 due to the 2nd grade of the tolerance of the coil diameter of the cold molded compression coiled. |
Right volume |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
As a reference value, do not give tolerance |
To improve performance, apply low -temperature grilling after spring molding |
There is no grinding for those with a wire diameter of 0.4mm or less. Those with a line diameter of 0.5mm or more are grinding. |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
28.7hrs
